Time for a change of paradigm for Alpine subduction?

Author(s):  
Mark R. Handy ◽  
Stefan M. Schmid ◽  
Marcel Paffrath ◽  
Wolfgang Friederich

<p>The prevailing paradigm of mountain building in the Alps entails subduction of European continental lithosphere some 100km thick beneath the Adriatic plate. Based on recent results of AlpArray, we propose a new model that involves subduction and wholesale detachment of locally much thicker (200-240 km) European lithosphere. Our approach combines teleseismic P-wave tomography and existing Local Earthquake Tomography (LET) to image the Alpine slabs and their connections with the overlying orogenic crust at unprecedented resolution. The images call into question the simple notion that slabs comprise only seismically fast lithosphere and suggest that the mantle of the downgoing European plate is compositionally heterogeneous, containing both positive and negative seismic anomalies of up to 5%. We interpret these as compositional rather than thermal anomalies, inherited from the Paleozoic Variscan orogenic cycle and presently dipping beneath the Alpine orogenic front. In contrast to the European Plate, the lithosphere of the Adriatic Plate is thinner (100-120 km) and has a more poorly defined lower boundary approximately at the interface between positive and negative Vp anomalies.</p><p> </p><p>Horizontal and vertical tomographic slices reveal that beneath the Central and Western Alps, the downgoing European Plate dips steeply to the S and SE and is locally detached from the Alpine crust. However, in the Eastern Alps and Carpathians east of the central Tauern Window, the Alpine slab anomaly occupies the 150-400 km depth interval and dips steeply to the N-NE, having completely detached from the  Alpine orogenic crust. This along-strike change coincides with an abrupt eastward decrease in Moho depth (Kind et al., this session), the Moho being underlain by a pronounced negative Vp anomaly reaching eastward into the Pannonian Basin area. This negative Vp anomaly is interpreted to represent hot upwelling asthenosphere that was instrumental in accommodating Neogene orogen-parallel lateral extrusion of the ALCAPA tectonic unit (upper plate crustal edifice of Alps and Carpathians) to the E.  An Adriatic origin of the northward-dipping, detached slab segment beneath the Eastern Alps is unlikely since its imaged down-dip length (200-300 km) matches estimated Tertiary shortening in the Eastern Alps accommodated by south-dipping subduction of European lithosphere, whereas shortening in the south-vergent eastern Southern Alps is only ≤ 70 km.</p><p> </p><p>A slab anomaly beneath the northernmost Dinarides, laterally adjoining the Eastern Alps, is missing. The slab anomaly beneath the northern Apennines, of Adriatic origin und dipping beneath the Tyrrhenian backarc, hangs subvertically and appears to be almost detached from the Apenninic orogenic crust. Except for its westernmost segment where it meets the Alpine slab, this slab is clearly separated from the latter by a broad extent of upwelling asthenosphere located south of the Alpine slabs beneath the Po Plain, i.e., just south of the Alpine subduction zone. Considered as a whole, the slabs beneath the Alpine chain are interpreted as attenuated, largely detached sheets of continental margin and Alpine Tethyan lithosphere that locally reach down to a slab graveyard in the Mantle Transition Zone (MTZ).</p>

2021 ◽  
Author(s):  
Mark Handy ◽  
Stefan Schmid ◽  
Marcel Paffrath ◽  
Wolfgang Friederich ◽  

Abstract. Based on recent results of AlpArray, we propose a new model of Alpine collision that involves subduction and detachment of thick (180–200 km) European tectosphere. Our approach combines teleseismic P-wave tomography and existing Local Earthquake Tomography (LET) allowing us to image the Alpine slabs and their connections with the overlying orogenic crust at an unprecedented resolution. The images call into question the conventional notion that slabs comprise only seismically fast lithosphere and suggest that the mantle of the downgoing European Plate is heterogeneous, containing both positive and negative Vp anomalies of up to 5–6%. We interpret these as compositional rather than thermal anomalies, inherited from the Variscan and pre-Variscan orogenic cycles. They make up a kinematic entity referred to as tectosphere, which presently dips beneath the Alpine orogenic front. In contrast to the European Plate, the tectosphere of the Adriatic Plate is thinner (100–120 km) and has a lower boundary approximately at the interface between positive and negative Vp anomalies. Horizontal and vertical tomographic slices reveal that beneath the Central and Western Alps, the downgoing European tectospheric slab dips steeply to the S and SE and is only locally still attached to the Alpine crust. However, in the Eastern Alps and Carpathians, the European slab is completely detached from the orogenic crust and dips steeply to the N-NE. This along-strike change in attachment coincides with an abrupt decrease in Moho depth below the Tauern Window, the Moho being underlain by a pronounced negative Vp anomaly that reaches eastward into the Pannonian Basin area. This negative Vp anomaly is interpreted to represent hot upwelling asthenosphere that was instrumental in accommodating Neogene orogen-parallel lateral extrusion of the ALCAPA tectonic unit (upper plate crustal edifice of Alps and Carpathians) to the east. A European origin of the northward-dipping, detached slab segment beneath the Eastern Alps is likely since its imaged down-dip length (300–500 km) matches estimated Tertiary shortening in the Eastern Alps accommodated by south-dipping subduction of European tectosphere. A slab anomaly beneath the Dinarides is of Adriatic origin and dips to the northeast. There is no evidence that this slab dips beneath the Alps. The slab anomaly beneath the northern Apennines, also of Adriatic origin, hangs subvertically and is detached from the Apenninic orogenic crust and foreland. Except for its northernmost segment where it locally overlies the southern end of the European slab of the Alps, this slab is clearly separated from the latter by a broad zone of low Vp velocities located south of the Alpine slab beneath the Po Basin. Considered as a whole, the slabs of the Alpine chain are interpreted as attenuated, largely detached sheets of continental margin and Alpine Tethyan lithosphere that locally reach down to a slab graveyard in the Mantle Transition Zone (MTZ).


Solid Earth ◽  
2021 ◽  
Vol 12 (11) ◽  
pp. 2633-2669 ◽  
Author(s):  
Mark R. Handy ◽  
Stefan M. Schmid ◽  
Marcel Paffrath ◽  
Wolfgang Friederich ◽  

Abstract. Based on recent results of AlpArray, we propose a new model of Alpine collision that involves subduction and detachment of thick (∼ 180 km) European lithosphere. Our approach combines teleseismic P-wave tomography and existing local earthquake tomography (LET), allowing us to image the Alpine slabs and their connections with the overlying orogenic lithosphere at an unprecedented resolution. The images call into question the conventional notion that downward-moving lithosphere and slabs comprise only seismically fast lithosphere. We propose that the European lithosphere is heterogeneous, locally containing layered positive and negative Vp anomalies of up to 5 %–6 %. We attribute this layered heterogeneity to seismic anisotropy and/or compositional differences inherited from the Variscan and pre-Variscan orogenic cycles rather than to thermal anomalies. The lithosphere–asthenosphere boundary (LAB) of the European Plate therefore lies below the conventionally defined seismological LAB. In contrast, the lithosphere of the Adriatic Plate is thinner and has a lower boundary approximately at the base of strong positive Vp anomalies at 100–120 km. Horizontal and vertical tomographic slices reveal that beneath the central and western Alps, the European slab dips steeply to the south and southeast and is only locally still attached to the Alpine lithosphere. However, in the eastern Alps and Carpathians, this slab is completely detached from the orogenic crust and dips steeply to the north to northeast. This along-strike change in attachment coincides with an abrupt decrease in Moho depth below the Tauern Window, the Moho being underlain by a pronounced negative Vp anomaly that reaches eastward into the Pannonian Basin area. This negative Vp anomaly is interpreted as representing hot upwelling asthenosphere that heated the overlying crust, allowing it to accommodate Neogene orogen-parallel lateral extrusion and thinning of the ALCAPA tectonic unit (upper plate crustal edifice of Alps and Carpathians) to the east. A European origin of the northward-dipping, detached slab segment beneath the eastern Alps is likely since its down-dip length matches estimated Tertiary shortening in the eastern Alps accommodated by originally south-dipping subduction of European lithosphere. A slab anomaly beneath the Dinarides is of Adriatic origin and dips to the northeast. There is no evidence that this slab dips beneath the Alps. The slab anomaly beneath the Northern Apennines, also of Adriatic origin, hangs subvertically and is detached from the Apenninic orogenic crust and foreland. Except for its northernmost segment where it locally overlies the southern end of the European slab of the Alps, this slab is clearly separated from the latter by a broad zone of low Vp velocities located south of the Alpine slab beneath the Po Basin. Considered as a whole, the slabs of the Alpine chain are interpreted as highly attenuated, largely detached sheets of continental margin and Alpine Tethyan oceanic lithosphere that locally reach down to a slab graveyard in the mantle transition zone (MTZ).


2021 ◽  
Author(s):  
Vincent F. Verwater ◽  
Eline Le Breton ◽  
Mark R. Handy ◽  
Vincenzo Picotti ◽  
Azam Jozi Najafabadi ◽  
...  

Abstract. Neogene indentation of the Adriatic plate into Europe led to major modifications of the Alpine orogenic structures and style of deformation in the Eastern Alps. Especially, the offset of the Periadriatic Fault by the Northern Giudicarie Fault marks the initiation of strike-slip faulting and lateral extrusion of the Eastern Alps. Questions remain on the exact role of this fault zone in changes of the Alpine orogen at depth. This necessitates quantitative analysis of the shortening, kinematics and depth of decoupling underneath the Northern Giudicarie Fault and associated fold-and thrust belt in the Southern Alps. Tectonic balancing of a network of seven cross sections through the Giudicarie Belt parallel to the local shortening direction reveals that it comprises two kinematic domains with different amounts and partly overlapping ages of shortening. These two domains are delimitated by the NW-SE oriented strike-slip Trento-Cles – Schio-Vicenza fault system, cross-cutting the Southern Alpine orogenic front in the south and merging with the Northern Giudicarie Fault in the north. The SW kinematic domain (Val Trompia sector) accommodated at least ~18 km of Late Oligocene to Early Miocene shortening. Since the Middle Miocene, the SW kinematic domain experienced a minimum of ~12–22 km shortening, whereas the NE kinematic domain underwent at least ~25–35 km shortening. Together, these domains contributed to an estimated ~53–75 km of sinistral strike-slip motion along the Northern Giudicarie Fault, implying that (most of) the offset of the Periadriatic Fault is due to Late Oligocene to Neogene indentation of the Adriatic plate into the Eastern Alps. Moreover, the faults linking the Giudicarie Belt with the Northern Giudicarie Fault reach ~15–20 km depth, indicating a thick-skinned tectonic style of deformation. These fault detachments may also connect at depth with a lower crustal Adriatic wedge that protruded north of the Periadriatic Fault and was responsible for N-S shortening and eastward escape of deeply exhumed units in the Tauern Window. Finally, the east-west lateral variation of shortening indicates internal deformation and lateral variation in strength of the Adriatic indenter, related to Permian – Mesozoic tectonic structures and paleogeographic domains.


2021 ◽  
Author(s):  
Rainer Kind ◽  
Stefan Schmid ◽  
Xiaohui Yuan ◽  
Ben Heit

<p>In the frame of the AlpArray project we analyse teleseismic data from permanent and temporary stations of the greater Alpine region to study seismic discontinuities in the entire lithosphere. We use broadband S-to-P converted signals from below the seismic stations. In order to avoid sidelobes, no deconvolution or filtering is applied and S arrival times are used as reference. We show a number of north-south and east-west profiles through the greater Alpine area. The Moho signals are always seen very clearly, and also negative velocity gradients below the Moho are visible in a number of profiles. The subducting European Moho is visible in the Eastern Alps west of 13.5°E (the eastern edge of the Tauern Window) and reaches there about 60km depth at 47°N. East of about 13.5°E, the image of the Moho changes completely. No south dipping European Moho is found anymore, instead the Moho is shallowing towards the Pannonian Basin. This suggests severe post-nappe emplacement modifications east of about 13.5°E, most probably associated with delamination of the mantle lithosphere within the formerly subducting European slab, i.e. mantle that separated from the crustal parts of the Alpine-West Carpathian orogen during the last ca. 20 Ma when the Pannonian basin formed and the ALCAPA block underwent its E-directed lateral extrusion.</p><p>Ratschbacher, L., Frisch, W., Linzer, H.-G. and Merle, O. (1991) Lateral extrusion in the Eastern Alps, Part 2: Structural analysis. Tectonics, vol.10, No.2, 257-271.</p>


2021 ◽  
Author(s):  
Rainer Kind ◽  
Stefan M. Schmid ◽  
Xiaohui Yuan ◽  
Ben Heit ◽  
Thomas Meier ◽  
...  

Abstract. In the frame of the AlpArray project we analyze teleseismic data from permanent and temporary stations of the greater Alpine region to study seismic discontinuities down to about 140 km depth. We average broadband teleseismic S waveform data to retrieve S-to-P converted signals from below the seismic stations. In order to avoid processing artefacts, no deconvolution or filtering is applied and S arrival times are used as reference. We show a number of north-south and east-west profiles through the greater Alpine area. The Moho signals are always seen very clearly, and also negative velocity gradients below the Moho are visible in a number of profiles. A Moho depression is visible along larger parts of the Alpine chain. It reaches its largest depth of 60 km beneath the Tauern Window. The Moho depression ends however abruptly near about 13° E below the eastern Tauern Window. The Moho depression may represent the mantle trench, where the Eurasian lithosphere is subducted below the Adriatic lithosphere. East of 13° E an important along-strike change occurs; the image of the Moho changes completely. No Moho deepening is found in this easterly region; instead the Moho is updoming along the contact between the European and the Adriatic lithosphere all the way into the Pannonian Basin. An important along strike change was also detected in the upper mantle structure at about 14° E. There, the lateral disappearance of a zone of negative P-wave velocity gradient indicates that the S-dipping European slab laterally terminates east of the Tauern Window in the axial zone of the Alps. The area east of about 13° E is known to have been affected by severe late-stage modifications of the structure of crust and uppermost mantle during the Miocene when the ALCAPA (Alpine, Carpathian, Pannonian) block was subject to E-directed lateral extrusion.


Solid Earth ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 1309-1334
Author(s):  
Vincent F. Verwater ◽  
Eline Le Breton ◽  
Mark R. Handy ◽  
Vincenzo Picotti ◽  
Azam Jozi Najafabadi ◽  
...  

Abstract. Neogene indentation of the Adriatic plate into Europe led to major modifications of the Alpine orogenic structures and style of deformation in the Eastern and Southern Alps. The Giudicarie Belt is a prime example of this, as it offsets the entire Alpine orogenic edifice; its activity has been kinematically linked to strike-slip faulting and lateral extrusion of the Eastern Alps. Remaining questions on the exact role of this fold-and-thrust belt in the structure of the Alpine orogen at depth necessitate a quantitative analysis of the shortening, kinematics, and depth of decoupling beneath the Giudicarie Belt and adjacent parts of the Southern Alps. Tectonic balancing of a network of seven cross sections through the Giudicarie Belt parallel to the local NNW–SSE shortening direction reveals that this belt comprises two kinematic domains that accommodated different amounts of shortening during overlapping times. These two domains are separated by the NW–SE-oriented strike-slip Trento-Cles–Schio-Vicenza fault system, which offsets the Southern Alpine orogenic front in the south and merges with the Northern Giudicarie Fault in the north. The SW kinematic domain (Val Trompia sector) accommodated at least ∼ 18 km of Late Oligocene to Early Miocene shortening. Since the Middle Miocene, this domain experienced at least ∼ 12–22 km shortening, whereas the NE kinematic domain accommodated at least ∼ 25–35 km shortening. Together, these domains contributed an estimated minimum of ∼ 40–47 km of sinistral strike-slip motion along the Northern Giudicarie Fault, implying that most offset of the Periadriatic Fault is due to Late Oligocene to Neogene indentation of the Adriatic plate into the Eastern Alps. Moreover, the faults linking the Giudicarie Belt with the Northern Giudicarie Fault reach ∼ 15–20 km depth, indicating a thick-skinned tectonic style of deformation. These fault detachments may also connect at depth with a lower crustal Adriatic wedge that protruded north of the Periadriatic Fault and are responsible for N–S shortening and eastward, orogen-parallel escape of deeply exhumed units in the Tauern Window. Finally, the E–W lateral variation of shortening across the Giudicarie Belt indicates internal deformation and lateral variation in strength of the Adriatic indenter related to Permian–Mesozoic tectonic structures and paleogeographic zones.


2020 ◽  
Author(s):  
Dániel Kalmár ◽  
György Hetényi ◽  
István Bondár ◽  

<p>We perform P-to-S receiver function analysis to determine a detailed map of the crust-mantle boundary in the Eastern Alps–Pannonian basin–Carpathian mountains junction. We use data from the AlpArray Seismic Network, the Carpathian Basin Project and the South Carpathian Project temporary seismic networks, the permanent stations of the Hungarian National Seismological network, stations of a private network in Hungary as well as selected permanent seismological stations in neighbouring countries for the time period between 2004.01.01. and 2019.03.31. Altogether 221 seismological stations are used in the analysis. Owing to the dense station coverage we can achieve so far unprecedented resolution, thus extending our previous work on the region. We applied three-fold quality control, the first two on the observed waveforms and the third on the calculated radial receiver functions, calculated by the iterative time-domain deconvolution approach. The Moho depth was determined by two independent approaches, the common conversion point (CCP) migration with a local velocity model and the H-K grid search. We show cross-sections beneath the entire investigated area, and concentrate on major structural elements such as the AlCaPa and Tisza-Dacia blocks, the Mid-Hungarian Fault Zone and the Balaton Line. Finally, we present the Moho map obtained by the H-K grid search method and pre-stack CCP migration and interpolation over the entire study area, and compare results of two independent methods to prior knowledge.</p>


2015 ◽  
Vol 418 ◽  
pp. 53-65 ◽  
Author(s):  
Susanne Schneider ◽  
Konrad Hammerschmidt ◽  
Claudio L. Rosenberg ◽  
Axel Gerdes ◽  
Dirk Frei ◽  
...  

2019 ◽  
Vol 56 (12) ◽  
pp. 1347-1365 ◽  
Author(s):  
Vahid Teknik ◽  
Abdolreza Ghods ◽  
Hans Thybo ◽  
Irina M. Artemieva

We present a new 2D crustal-scale model of the northwestern Iranian plateau based on gravity–magnetic modeling along the 500 km long China–Iran Geological and Geophysical Survey in the Iranian plateau (CIGSIP) seismic profile across major tectonic provinces of Iran from the Arabian plate into the South Caspian Basin (SCB). The seismic P-wave receiver function (RF) model along the profile is used to constrain major crustal boundaries in the density model. Our 2D crustal model shows significant variation in the sedimentary thickness, Moho depth, and the depth and extent of intra-crustal interfaces. The Main Recent Fault (MRF) between the Arabian crust and the overriding central Iran crust dips at approximately 13° towards the northeast to a depth of about 40 km. The geometry of the MRF suggests about 150 km of underthrusting of the Arabian plate beneath central Iran. Our results indicate the presence of a high-density lower crustal layer beneath Zagros. We identify a new crustal-scale suture beneath the Tarom valley between the South Caspian Basin crust and Central Iran and the Alborz. This suture is associated with sharp variation in Moho depth, topography, and magnetic anomalies, and is underlain by a 20 km thick high-density crustal root at 35–55 km depth. The high-density lower crust in Alborz and Zagros may be related to partial eclogitization of crustal roots below about 40 km depth. The gravity and magnetic models indicate a highly extended continental crust for the SCB crust along the profile. Low observed magnetic susceptibility of the Kermanshah ophiolites likely indicates that the ophiolite rocks only form a thin layer that has been thrust over the sedimentary cover.


Sign in / Sign up

Export Citation Format

Share Document