scholarly journals POLENET/LAPNET teleseismic <i>P</i> wave travel time tomography model of the upper mantle beneath northern Fennoscandia

Solid Earth ◽  
2016 ◽  
Vol 7 (2) ◽  
pp. 425-439 ◽  
Author(s):  
Hanna Silvennoinen ◽  
Elena Kozlovskaya ◽  
Eduard Kissling

Abstract. The POLENET/LAPNET (Polar Earth Observing Network) broadband seismic network was deployed in northern Fennoscandia (Finland, Sweden, Norway, and Russia) during the third International Polar Year 2007–2009. The array consisted of roughly 60 seismic stations. In our study, we estimate the 3-D architecture of the upper mantle beneath the northern Fennoscandian Shield using high-resolution teleseismic P wave tomography. The P wave tomography method can complement previous studies in the area by efficiently mapping lateral velocity variations in the mantle. For this purpose 111 clearly recorded teleseismic events were selected and the data from the stations hand-picked and analysed. Our study reveals a highly heterogeneous lithospheric mantle beneath the northern Fennoscandian Shield though without any large high P wave velocity area that may indicate the presence of thick depleted lithospheric “keel”. The most significant feature seen in the velocity model is a large elongated negative velocity anomaly (up to −3.5 %) in depth range 100–150 km in the central part of our study area that can be followed down to a depth of 200 km in some local areas. This low-velocity area separates three high-velocity regions corresponding to the cratonic units forming the area.

2015 ◽  
Vol 7 (3) ◽  
pp. 2527-2562 ◽  
Author(s):  
H. Silvennoinen ◽  
E. Kozlovskaya ◽  
E. Kissling

Abstract. The POLENET/LAPNET broadband seismic array was deployed in northern Fennoscandia (Finland, Sweden, Norway, and Russia) during the third International Polar Year 2007–2009. The array consisted of roughly 60 seismic stations. In our study we estimate the 3-D architecture of the upper mantle beneath the northern Fennoscandian shield using high-resolution teleseismic P-wave tomography. For this purpose 111 clearly recorded teleseismic events were selected and the data from the stations handpicked and analysed. Our study reveals a highly heterogeneous lithospheric mantle beneath the northern Fennoscandian shield though without any large high P-wave velocity area that may indicate presence of thick depleted lithospheric "keel". The most significant feature seen in the velocity model is a large elongated negative velocity anomaly (up to −3.5 %) in depth range 100–150 km in the central part of our study area that can be followed down to a depth of 200 km in some local areas. This low-velocity area separates three high-velocity regions corresponding to the cratons and it extends to greater depth below the Karelian craton.


2020 ◽  
Vol 224 (3) ◽  
pp. 1588-1606
Author(s):  
A Clutier ◽  
S Gautier ◽  
C Tiberi

SUMMARY While local earthquake tomography is typically used to image the crust, this technique has restricted depth penetration due to short receiver-source distances. Regional tomography however aims to image the upper mantle from teleseismic events but suffers from poor resolution from 0 down to 40 km depth. We present here a hybrid method that combines the two approaches taking advantage of the short-wavelength resolution within the crust to better constrain the ray path at depth, and thus to improve the lithospheric imaging. Using this new method enhances the continuity or disruption of mantle anomalies towards the surface. Such hybrid tomographic images of crust-to-upper mantle structures are then critical to understand the relation and interplay between the thermal and mechanical lithospheric processes and the role in the localization of the deformation at the surface. We apply our approach to the North Tanzanian Divergence (NTD), where those processes interact with a cold cratonic lithosphere. Our new tomographic images clearly demonstrate the impact of deep-seated processes on surface features. First, strong lateral velocity anomalies and clustered seismicity in the crust are consistent with the surface geology of the NTD (rifted basins, volcanoes and border faults). Then, at a lithospheric scale, the velocity distribution highlights the major role of inherited structures in guiding the rift opening. In particular, our study suggests a strong influence of the Masai cratonic block, south of the NTD, in the rift evolution. The transition from the north–south axial valley into three diverging rift arms (Eyasi, Natron-Manyara and Pangani) is likely due to the change in rheology and to the presence of magma along inherited sutures between the craton and the mobile belts.


Geophysics ◽  
2016 ◽  
Vol 81 (6) ◽  
pp. P57-P70 ◽  
Author(s):  
Shaun Strong ◽  
Steve Hearn

Survey design for converted-wave (PS) reflection is more complicated than for standard P-wave surveys, due to raypath asymmetry and increased possibility of phase distortion. Coal-scale PS surveys (depth [Formula: see text]) require particular consideration, partly due to the particular physical properties of the target (low density and low velocity). Finite-difference modeling provides a pragmatic evaluation of the likely distortion due to inclusion of postcritical reflections. If the offset range is carefully chosen, then it may be possible to incorporate high-amplitude postcritical reflections without seriously degrading the resolution in the stack. Offsets of up to three times target depth may in some cases be usable, with appropriate quality control at the data-processing stage. This means that the PS survey design may need to handle raypaths that are highly asymmetrical and that are very sensitive to assumed velocities. A 3D-PS design was used for a particular coal survey with the target in the depth range of 85–140 m. The objectives were acceptable fold balance between bins and relatively smooth distribution of offset and azimuth within bins. These parameters are relatively robust for the P-wave design, but much more sensitive for the case of PS. Reduction of the source density is more acceptable than reduction of the receiver density, particularly in terms of the offset-azimuth distribution. This is a fortuitous observation in that it improves the economics of a dynamite source, which is desirable for high-resolution coal-mine planning. The final-survey design necessarily allows for logistical and economic considerations, which implies some technical compromise. However, good fold, offset, and azimuth distributions are achieved across the survey area, yielding a data set suitable for meaningful analysis of P and S azimuthal anisotropy.


2014 ◽  
Vol 25 (4) ◽  
pp. 1690-1699 ◽  
Author(s):  
Junmeng Zhao ◽  
Dapeng Zhao ◽  
Heng Zhang ◽  
Hongbing Liu ◽  
Ying Huang ◽  
...  

1977 ◽  
Vol 67 (3) ◽  
pp. 693-711 ◽  
Author(s):  
Charles A. Langston ◽  
David E. Blum

abstract Simultaneous modeling of source parameters and local layered earth structure for the April 29, 1965, Puget Sound earthquake was done using both ray and layer matrix formulations for point dislocations imbedded in layered media. The source parameters obtained are: dip 70° to the east, strike 344°, rake −75°, 63 km depth, average moment of 1.4 ± 0.6 × 1026 dyne-cm, and a triangular time function with a rise time of 0.5 sec and falloff of 2.5 sec. An upper mantle and crustal model for southern Puget Sound was determined from inferred reflections from interfaces above the source. The main features of the model include a distinct 15-km-thick low-velocity zone with a 2.5-km/sec P-wave-velocity contrast lower boundary situated at approximately 56-km depth. Ray calculations which allow for sources in dipping structure indicate that the inferred high contrast value can trade off significantly with interface dip provided the structure dips eastward. The effective crustal model is less than 15 km thick with a substantial sediment section near the surface. A stacking technique using the instantaneous amplitude of the analytic signal is developed for interpreting short-period teleseismic observations. The inferred reflection from the base of the low-velocity zone is recovered from short-period P and S waves. An apparent attenuation is also observed for pP from comparisons between the short- and long-period data sets. This correlates with the local surface structure of Puget Sound and yields an effective Q of approximately 65 for the crust and upper mantle.


1990 ◽  
Vol 80 (6B) ◽  
pp. 2194-2213
Author(s):  
Vladislav Ryaboy

Abstract Waveforms from the NORESS array were analyzed for 147 industrial explosions during the 1985 to 1988 period, along a profile running east from Oslo (NORESS) to Helsinki to Leningrad (OHL profile). The events were 250 to 1300 km from NORESS and had local magnitude in the range 2.0 to 3.5. Event locations and origin times constrained by the University of Helsinki's regional seismic network provide a reliable basis for travel-time estimation at NORESS. We also used data recorded by NORSAR in 1979 for three shots on the FENNOLORA north-south, long-range seismic profile, which were near the OHL profile. Analysis of mantle P-wave signals from the explosions showed that first arrivals could be traced continuously to a distance of 750 to 800 km, where there is a cutoff and shift of approximately 2.0 to 2.5 sec in the travel-time curve and an increase in average apparent velocity. Interpretation of the observed travel times and waveforms for this profile suggests a low-velocity zone from approximately 105 to 135 km depth. Combined analysis of the seismic data with a Bouguer gravity map indicates the presence in the upper mantle of a high-velocity, high-density body of linear extent approximately from 200 to 300 to 500 to 600 km east of the NORESS array. It is postulated that this body may represent the root of an ancient volcanic system, in which lighter, silicic constituents were depleted from the upper mantle during the eruptive phase.


1979 ◽  
Vol 69 (6) ◽  
pp. 1733-1744
Author(s):  
George A. McMechan

abstract A P-wave velocity profile for the upper mantle at depths between 200 and 800 km beneath Eastern United States has been constructed from a combination of data from natural and artificial sources. Data for this part of the upper mantle are scarce, particularly beyond 20° epicentral distance, because of the sparse distribution of relevant sources and stations. Nevertheless, this study is the first to use amplitude constraints in a model determination for this region, and the model that has been chosen can account for the main observed amplitude features as well as travel times. The resulting velocity profile is similar to those previously determined for the regions to the north and west, but has a broadening of velocity transitions relative to those in the western United States. Evidence is found for the existence of lateral velocity inhomogeneity within the mantle.


Sign in / Sign up

Export Citation Format

Share Document