Antimonene-gold Based Twin-Core SPR Sensor with Side Polished Semi-Arc Groove Dual Sensing Channel: An Investigation with 2D Material

We propose surface plasmon resonance (SPR) based single-side polished photonic crystal fiber (SSP-PCF) sensor for low as well as high refractive index (RI) sensing. To achieve this, an active metal gold (Au) is deposited on the PCF's flat narrow channels to form a dual-sensing channel. Following that, a thin nanolayer antimonene is deposited on Au, as its buckled honeycomb lattice structure aids in the trapping of numerous biomolecules. For the sensing range of 1.27 to 1.39, numerical results show that the wavelength sensitivity (WS) and amplitude sensitivity (AS) mounted on 77000 nmRIU-1 and 1320.41 RIU-1, respectively, with wavelength resolution (RW), and amplitude resolution (RA), as high as 1.298\(\times\)10-6 RIU, and 8.6\(\times\)10-7 RIU. The promising results obtained from the proposed SSP-PCF sensor offers improved refractive index sensing with a fine figure of merit (FOM), i.e., 311.74 RIU-1 for the sensing range of 1.27 to 1.39, which covers most known analytes such as proteins, cancer cells, glucose, viruses, DNA/RNA, medicinal drugs, halogenated organic acids. Further, the proposed sensor's design requires a simple fabrication procedure.

An Anatomically and Hemodynamically Realistic Simulation Framework for 3D Ultrasound Localization Microscopy

The resolution of 3D Ultrasound Localization Microscopy (ULM) is determined by acquisition parameters such as frequency and transducer geometry but also by microbubble (MB) concentration, which is also linked to the total acquisition time needed to sample the vascular tree at different scales. In this study, we introduce a novel 3D anatomically- and physiologically-realistic ULM simulation framework based on two-photon microscopy (2PM) and in-vivo MB perfusion dynamics. As a proof of concept, using metrics such as MB localization error, MB count and network filling, we could quantify the effect of MB concentration and PSF volume by varying probe transmit frequency (3-15 MHz). We find that while low frequencies can achieve sub-wavelength resolution as predicted by theory, they are also associated with prolonged acquisition times to map smaller vessels, thus limiting effective resolution. A linear relationship was found between maximal MB concentration and inverse point spread function (PSF) volume. Since inverse PSF volume roughly scales cubically with frequency, the reconstruction of the equivalent of 10 minutes at 15 MHz would require hours at 3 MHz. We expect that these findings can be leveraged to achieve effective reconstruction and serve as a guide for choosing optimal MB concentrations in ULM.

Accurate Measurements of a Wavelength Drift in High-Temperature Silica-Fiber Bragg Gratings

Fiber Bragg gratings (FBG) are extensively used to perform high-temperature measurements in harsh environments, however the drift of the characteristic Bragg wavelength affects their long-term stability resulting in an erroneous temperature measurement. Herein we report the most precise and accurate measurements of wavelength drifts available up to date on high-temperature FBGs. The measurements were performed with a set of packaged π-phase-shifted FBGs for high wavelength resolution, in caesium and sodium pressure-controlled heat pipes for stable temperature environment and with a tunable laser for stable wavelength measurements with a 0.1 pm resolution. Using this dataset we outline the experimental caveats that can lead to inconsistent results and confusion in measuring wavelength drifts, namely: influence of packaging; interchangeability of FBGs produced under identical conditions; birefringence of π-phase-shifted FBGs; initial transient behaviour of FBGs at constant temperature and dependence on the previous thermal history of FBGs. In addition, we observe that the wavelength stability of π-phase-shifted gratings at lower temperature is significantly improved upon by annealing at higher temperature. The lowest value of the wavelength drift we obtain is +0.014 pm·h−1 at 600 °C (corresponding to +0.001 °C·h−1) after annealing for 400 h at 1000 °C, the longest annealing time we have tried. The annealing time required to achieve the small drift rate is FBG-specific.

A High Sensitive Sensor Using Mim Coupled With a Rectangular Cavity Based on Fano Resonance

In this paper, a design with high sensitivity of a plasmonic biosensor by waveguide system is proposed, based on Metal-Insulator-Metal (MIM) coupled with unique rectangular cavities, this structure numerically simulated using the Finite-Difference Time-Domain method (FDTD) in two Dimensions (2D), and analyzed for the optimal sensor performance, by detecting the resonance wavelength and varying the refractive index (RI). The results show two sharp transmission peaks with high transmittance and asymmetrical line-shaped Fano resonances achieved with high value of sensitivity is 3010nm/RIU, by taking the wavelength resolution reach as high as 3.84×10-6 RIU. Considering the standards of Chip-scale integrated planar photonic sensing, the newly designed of the proposed structure with such high sensitivity provides remarkable properties suitable for biosensors, filter, and provide a new possibility for designing compact and high-performance plasmonic biosensors devices.

A Wavelength-Resolution SAR Change Detection Method Based on Image Stack through Robust Principal Component Analysis

Recently, it was demonstrated that low-frequency wavelength-resolution synthetic aperture radar (SAR) images could be considered to follow an additive mixing model due to their backscatter characteristics. This simplification allows for the use of source separation methods, such as robust principal component analysis (RPCA) via principal component pursuit (PCP), for detecting changes in those images. In this manuscript, a change detection method for wavelength-resolution SAR images based on image stack through RPCA is proposed. The method aims to explore both the temporal and flight heading diversity of a set of wavelength-resolution multitemporal SAR images in order to detect concealed targets in forestry areas. A heuristic based on three rules for better exploring the RPCA results is introduced, and a new configurable parameter for false alarm reduction based on the analysis of image windows is proposed. The method is evaluated using real data obtained from measurements of the ultrawideband (UWB) very high-frequency (VHF) SAR system CARABAS-II. Experiments for stacks of four and seven reference images are conducted, and the use of reference images acquired with different flight headings is explored. The results indicate that a gain in performance can be achieved by using large image stacks containing, at least, one image of each possible flight heading of the data set, which can result in a probability of detection (PD) above 99% for a false alarm rate (FAR) as low as one false alarm per three square kilometers. Furthermore, it is demonstrated that high PD and low FAR can be achieved, also considering images from similar flight headings as reference images.