scholarly journals Thermal Optimization Design of PBGA Package Based on Finite Element Analysis

2018 ◽  
Author(s):  
Hui Yang ◽  
Jihui Wu ◽  
Yang Zhang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Optimization Design ◽  
Element Analysis ◽  
Thermal Optimization

Weight-Reduction Optimization Design for Milling Planer Bed Based on Finite Element Analysis

2012 ◽  
Vol 490-495 ◽  
pp. 2785-2789
Author(s):  
Dong Sun ◽  
Xu Dong Yang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Weight Reduction ◽  
Optimization Design ◽  
Weak Link ◽  
Three Dimensional ◽  
Production Costs ◽  
Element Analysis ◽  
Before And After ◽  
Improvement Scheme

The milling planer bed is one of the most important foundational parts for the entire machine, sufficient stiffness is required. The posterior segment of a certain milling planer bed is regarded as the optimization object in this paper. Three-dimensional modeling method is used to calculate the exact weight of the bed and then finite element analysis is used to research the static and dynamic characteristics before and after weight-reduction. The weak link of the bed is found out and a improvement scheme is put forward ensuring lower production costs under the premise of sufficient rigidity.

The Rod Force Law Analysis of 600MW Air Cooling Tower

2014 ◽  
Vol 945-949 ◽  
pp. 1135-1138
Author(s):  
Tao Liang ◽  
Chun Ling Meng ◽  
Yang Li ◽  
Xiu Hua Zhao
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Axial Force ◽  
Optimization Design ◽  
Cooling Tower ◽  
Air Cooling ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
The Cost

The finite element analysis of large air cooling tower was carried out using ABAQUS. On the basis of strength above,8 types of the axial force are analyzed and summarized, find valuable rules, and put forward the further optimization design. So that it can satisfy the strength and stability of air cooling tower, the structure is more reasonable, reduce weight, reduce the cost.

Optimization Design of the Electromagnetic Torque for Surface-Mounted PMSM using GA and Finite Element Analysis for Electric Vehicle

2021 ◽  
Author(s):  
Edric Wee Ming Wong ◽  
Choo Jun Tan ◽  
Jenn Hwai Leong ◽  
Syauqina Akmar Mohd-Shafri ◽  
Dahaman Ishak ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Electric Vehicle ◽  
Optimization Design ◽  
Electromagnetic Torque ◽  
Element Analysis

Optimization design of titanium alloy connecting rod based on structural topology optimization

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Bin Zheng ◽  
Yi Cai ◽  
Kelun Tang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Topology Optimization ◽  
Optimization Design ◽  
Equivalent Stress ◽  
Connecting Rod ◽  
Element Analysis ◽  
Content Type ◽  
The Finite Element Analysis ◽  
Maximum Equivalent Stress

Purpose The purpose of this paper is to realize the lightweight of connecting rod and meet the requirements of low energy consumption and vibration. Based on the structural design of the original connecting rod, the finite element analysis was conducted to reduce the weight and increase the natural frequencies, so as to reduce materials consumption and improve the energy efficiency of internal combustion engine. Design/methodology/approach The finite element analysis, structural optimization design and topology optimization of the connecting rod are applied. Efficient hybrid method is deployed: static and modal analysis; and structure re-design of the connecting rod based on topology optimization. Findings After the optimization of the connecting rod, the weight is reduced from 1.7907 to 1.4875 kg, with a reduction of 16.93%. The maximum equivalent stress of the optimized connecting rod is 183.97 MPa and that of the original structure is 217.18 MPa, with the reduction of 15.62%. The first, second and third natural frequencies of the optimized connecting rod are increased by 8.89%, 8.85% and 11.09%, respectively. Through the finite element analysis and based on the lightweight, the maximum equivalent stress is reduced and the low-order natural frequency is increased. Originality/value This paper presents an optimization method on the connecting rod structure. Based on the statics and modal analysis of the connecting rod and combined with the topology optimization, the size of the connecting rod is improved, and the static and dynamic characteristics of the optimized connecting rod are improved.

scholarly journals Finite Element Analysis Applied to Ergonomic Design of 2-Piece Aluminum Beverage Cans and Bottles

2007 ◽  
Author(s):  
Jing Han ◽  
Koetsu Yamazaki ◽  
Sadao Nishiyama ◽  
Ryoichi Itoh
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Optimization Design ◽  
Tactile Sensation ◽  
Ergonomic Design ◽  
Element Analysis ◽  
Ring Shape ◽  
Beverage Containers ◽  
The Finite Element Analysis ◽  
Sheet Formability

This paper has introduced the finite element analysis (FEA) into the ergonomic design to evaluate the human feelings numerically and objectively, and then into the optimization design of beverage containers considering human factors. In the design of the end of can (the lid of can), experiments and the FEA of indenting vertically the fingertip pulp by a probe and the tab of end have been done to observe force responses and to study feelings in the fingertip. A numerical simulation of finger lifting the tab for opening the can has also been performed, and discomfort in the fingertip has been evaluated numerically to present the finger-accessibility of the tab. The comparison of finger-accessibility between two kinds of tab ring shape designs showed that the tab that may have a larger contact area with the finger is better. In the design of beverage bottles served hot drinks, the FEA of tactile sensation of heat has been performed to evaluate numerically the touch feeling of the finger when holding the hot bottle. The numerical simulations of embossing process have also been performed to evaluate the formability of various rib-shape designs. The optimum design has then been done considering the hot touch feeling as well as the metal sheet formability.

Structural Optimization Design of MR Fluid Clutch

2007 ◽  
Vol 546-549 ◽  
pp. 1673-1676 ◽  
Author(s):  
Wei Jia Meng ◽  
Zhan Wen Huang ◽  
Yan Ju Liu ◽  
Xiao Rong Wu ◽  
Yi Sun
Keyword(s):  
Magnetic Field ◽  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Optimization Design ◽  
Element Analysis ◽  
Mr Fluids ◽  
Magneto Rheological ◽  
Ferromagnetic Fluids ◽  
Ferromagnetic Particles

Magnetorheological (MR) fluids are suspensions of micron sized ferromagnetic particles dispersed in varying proportions of a variety of non-ferromagnetic fluids. MR fluids exhibit rapid, reversible and significant changes in their rheological (mechanical) properties while subjected to an external magnetic field. In this paper, a double-plate magneto-rheological fluid (MRF) clutch with controllable torque output have been designed. Electromagnetic finite element analysis is used to optimize the design of the clutch by using the commercial FEA software ANSYS.

Application of ANSYS in Grid Structure

2012 ◽  
Vol 271-272 ◽  
pp. 705-709
Author(s):  
Hong Jiang Chen ◽  
Yue Hai Wu
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Optimization Design ◽  
Grid Structure ◽  
Element Analysis ◽  
Space Truss ◽  
Design Function ◽  
Bar Buckling ◽  
Reasonable Choice ◽  
Definition Of

Space grid structure of modern large span structure engineering in the most commonly used structure form. This paper used ANSYS network space truss finite element analysis, discuss the element type, and the selection of material models, and the definition of the limit stress, when necessary, even considering the bar buckling state ( buckling ). Under various load (permanent loads, wind loads, seismic loads, under the action of gravity ), using the powerful finite element analysis software ANSYS on the structure static analysis, after the use of ANSYS powerful optimization design function, the structure safety, the bar section optimization design, and then on the basis of the existing rod a cross section, a reasonable choice of bar section, reduce the material consumption, to achieve the best economic, reasonable design, implementation can develop continuously, make the satisfactory design.

Sign in / Sign up

Export Citation Format

Share Document