scholarly journals Performance Analysis of DPSK Technique for Optical Transmission Systems

2021 ◽  
Vol 2021 (2) ◽  
pp. 6-10
Author(s):  
Zeyad Yaseen
Keyword(s):  
Bit Error Rate ◽  
Error Rate ◽  
Optical Transmission ◽  
Optical Signal ◽  
Optical Field ◽  
High Data Rate ◽  
Long Distance ◽  
Transmission Systems ◽  
High Data ◽  
Optical Transmission Systems

The long-distance high data rate transmission is accompanied by many transmission defects, which reduce the performance of optical communication systems. Therefore, due to the need to increase data capacity for the end user, signal regeneration techniques were used to mitigate these non-linear defects in the electric or optical field. Several techniques used to modify the optical signal, which is the possible solution to reduce the limit of non-linear transmission defects, especially before converting the signal from the optical field to the electric field. Since most of the techniques used to reduce the attenuation in the optical signal do not have the ability to reduce the error rate to reach a bit error rate (BER) less than 10-10 with a transmission capacity less than -10dBm. In this paper, the performance evaluation of DPSK has been validated for its adequate use in transmission systems. Nevertheless, the performance of the DPSK optical system was assessed to rely on a different coding format such as: Return to Zero (RZ) & Non-Return to Zero (NRZ-DPSK). The system is designed to withstand high data rate on long-distance optical transmission systems. The system investigated was simulated with OptiSystemTM 13.0 commercial software. The investigated system demonstrated the ability to mitigate nonlinear impairments from the noisy optical DPSK system with high bit-error rate (BER) improvement at low power transmission. Optical DPSK demonstrates the ability to send high-rate data transmission systems for use in the next generation of optical networks.

scholarly journals Possibilities for Advanced Encoding Techniques at Signal Transmission in the Optical Transmission Medium

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Filip Čertík ◽  
Rastislav Róka
Keyword(s):  
Optical Fiber ◽  
Simulation Model ◽  
Optical Transmission ◽  
Signal Transmission ◽  
Optical Signal ◽  
Negative Effects ◽  
Transmission Systems ◽  
High Data ◽  
Modulation Techniques ◽  
Optical Transmission Systems

This paper presents a possible simulation of negative effects in the optical transmission medium and an analysis for the utilization of different signal processing techniques at the optical signal transmission. An attention is focused on the high data rate signal transmission in the optical fiber influenced by linear and nonlinear environmental effects presented by the prepared simulation model. The analysis includes possible utilization of OOK, BPSK, DBPSK, BFSK, QPSK, DQPSK, 8PSK, and 16QAM modulation techniques together with RS, BCH, and LDPC encoding techniques for the signal transmission in the optical fiber. Moreover, the prepared simulation model is compared with real optical transmission systems. In the final part, a comparison of the selected modulation techniques with different encoding techniques and their implementation in real transmission systems is shown.

Multicore fibers for large capacity transmission

Nanophotonics ◽  
2013 ◽  
Vol 2 (5-6) ◽  
pp. 441-454 ◽  
Author(s):  
Kunimasa Saitoh ◽  
Shoichiro Matsuo
Keyword(s):  
Optical Transmission ◽  
State Of The Art ◽  
Single Mode ◽  
Single Mode Fiber ◽  
Long Distance ◽  
Transmission Systems ◽  
Large Capacity ◽  
Spatial Efficiency ◽  
Optical Transmission Systems ◽  
Current Maximum

AbstractWe experience Internet traffic growth of 100 times every 10 years. However, the capacity of existing standard single-mode fiber is approaching its fundamental limit regardless of significant realization of transmission technologies which allow for high spectral efficiencies. Space division multiplexing (SDM) based on multicore fibers (MCFs) has emerged as a solution to the problem of saturation of the capacity of optical transmission systems. This article presents the recent progress on the MCFs for future large capacity long-distance transmission systems. In MCFs, there is a tradeoff relationship between low crosstalk and high multiplicity, therefore the maximum number of cores and the core arrangement have to be carefully determined based on the required crosstalk level and core size. The state-of-the-art of fabricated MCFs and the transmission experiments using MCFs are reviewed. The current maximum capacity-distance product in MCF transmission is 368.2 (184.1+184.1) Pb/s/fiber km with the relative spatial efficiency of 4.7 compared with a standard single-mode fiber. In order to increase the spatial efficiency as well as the capacity-distance product further in MCFs, the possibility of heterogeneous MCFs and few-mode MCFs is also presented.

scholarly journals Comparison of coherent optical transmission systems performance by DP-QAM levels

2020 ◽  
Vol 10 (3) ◽  
pp. 2513
Author(s):  
Abdul Gafur ◽  
M.S. Islam ◽  
Syed Zahidur Rashid
Keyword(s):  
Bit Error Rate ◽  
Optical Transmission ◽  
Signal To Noise Ratio ◽  
Optical Signal ◽  
Input Power ◽  
Error Vector Magnitude ◽  
Symbol Rate ◽  
Optical Transmission Systems ◽  
The Relationship ◽  
Vector Magnitude

In this paper, we investigated the Coherent Optical Transmission System (COTS) performance for multiple types of DP-QAM levels considering various CW laser input power. We compared the performance of COTS for 100 Gb/s with DP-32QAM, DP-64QAM and DP-128QAM respectively. We also inspected the relationship among Optical Signal to Noise Ratio (OSNR), Error Vector Magnitude (EVM) and Bit Error Rate (BER) which are found in accordance for both simulation curves and constellation diagrams. Results are obtained by experiments with DP-32QAM, DP-64QAM and DP-128QAM modulations techniques at symbol rate of 10 Gsymbol/s, 8.33 Gsymbol/s and 7.142 Gsymbol/s respectively. This work is completely based on simulation in Optisystem simulation setup.

Sign in / Sign up

Export Citation Format

Share Document