scholarly journals Constructing 3D Geological Model for Tertiary Reservoir in Khabaz Oil Field by using Petrel software.

2020 ◽  
Vol 10 (2) ◽  
pp. 54-75
Author(s):  
Yousif N. Abdul Majeed ◽  
Dr. Ahmad A. Ramadhan ◽  
Dr. Ahmed J. Mahmood
Keyword(s):  
Water Saturation ◽  
Oil Field ◽  
Geological Model ◽  
Simulation Algorithm ◽  
Petrophysical Properties ◽  
Geological Structures ◽  
Geostatistical Method ◽  
3D Geological Model ◽  
Petrophysical Model ◽  
Gaussian Simulation

3D Geological model for tertiary reservoir in khabaz oil field had been constructed byusing petrel software. Seven wells have been selected in this study in order to designPetrophysical properties (porosity, water saturation, and permeability). Structural modelcan be clarified tertiary reservoir in term of geological structures is a symmetrical smallanticline fold with four faults. Tertiary reservoir consist of six units are (Jeribe, UnitA,UnitA', UnitB, UnitBE, and UnitE). According to Petrophysical properties, layering hadbeen constructed for each tertiary units. Petrophysical model has been designed using thesequential Gaussian simulation algorithm as a geostatistical method. The results illustratesthat Unit B and Unit BE have the best petrophysical properties and the big amount of oil.

scholarly journals 3D Geological Modeling for Yamama Reservoir in Subba, Luhias and Ratawi Oil Fields, South of Iraq

2019 ◽  
Vol 60 (5) ◽  
pp. 1023-1036
Author(s):  
Naseem Sh. ALhakeem ◽  
Medhat E. Nasser ◽  
Ghazi H. AL-Sharaa
Keyword(s):  
Water Saturation ◽  
Salt Water ◽  
Oil Field ◽  
Oil Fields ◽  
Geological Model ◽  
Petrophysical Properties ◽  
Geological Modeling ◽  
3D Geological Modeling ◽  
South Of Iraq ◽  
Resistivity Log

3D geological model for each reservoir unit comprising the Yamama Formation revealed to that the formation is composed of alternating reservoirs and barriers. In Subba and Luhais fields the formation began with barrier YB-1 and four more barriers (YB-2, YB-3, YB-4, YB-5), separated five reservoirs (YR-A, YR-B, YR-C, YR-D, YR-E) ranging in thickness from 70 to 80 m for each of them deposited by five sedimentary cycles. In the Ratawi field the formation was divided into three reservoir units (YR-A, YR-B, and YR-C) separated by two barrier units (YB-2 and YB-3), the first cycle is missing in Ratawi field.   The study involves 1 well in Luhais field (Lu-12), 3 wells in Subba field (Su-7, Su-8, and Su-9), and 5 wells in Ratawi field (Rt-3, Rt-4, Rt-5, Rt-6 and Rt-7), the Luhais, Subba, and Ratawi fields located in the Mesopotamia zone (Zubair subzone). The reservoir units (YR-C and YR-D) in Subba oil field, and YR-B in Ratawi oil field represent the major reservoir units that characterized by the best Petrophysical properties (the highest porosity, the lowest water saturation, and the best Net Pay Thickness), Luhais oil field has poor to moderate Petrophysical properties and low oil bearing in YR-A, YR-B and YR-C units, and produce heavy oil and salt water from YR-D and YR-E as indicated by low resistivity log reading, and according to the Drill Steam Test (DST) with the description of cutting in final geological reports.

scholarly journals Geological Model for Khasib Formation of East Baghdad Field Southern Area

2020 ◽  
Vol 10 (3) ◽  
pp. 21-35
Author(s):  
Layth A. Jameel ◽  
Fadhil S. Kadhim ◽  
Hussein Ilaibi Al-Sudani
Keyword(s):  
Production Capacity ◽  
Volumetric Method ◽  
Oil Field ◽  
Sequential Gaussian Simulation ◽  
Geological Model ◽  
Petrophysical Properties ◽  
Middle Region ◽  
Oil Reserves ◽  
Southern Area ◽  
Gaussian Simulation

Geological model construction is an important phase of reservoir study as the production capacity of a reservoir depends on its structural and petrophysical characteristics. The economic benefit of the reservoir is evaluated by estimating the formation petrophysical properties and calculating the oil reserves. East Baghdad southern area field is a newly developing oil field in the middle region of Iraq, where Khasib formation is its main reservoir. The aim of this study is to estimate the petrophysical properties and determine the pay units of the formation under study and the initial oil in place. Sequential Gaussian Simulation was used here to distribute the petrophysical properties as the statistical method and volumetric method was used to calculate the oil in place. The results show that the main reservoir units of the formation are K2 and K3 units, and the estimated oil reserves equal to 2179 mmSTB (346.43 million cubic meters).

scholarly journals Geological Model for Mauddud Reservoir Khabaz Oil Field

2021 ◽  
Vol 54 (1D) ◽  
pp. 29-42
Author(s):  
Rayan Ahmed
Keyword(s):  
Oil And Gas ◽  
Water Saturation ◽  
Oil Field ◽  
Carbonate Reservoirs ◽  
Geological Model ◽  
Petrophysical Properties ◽  
Geological Modeling ◽  
The North ◽  
Porosity And Permeability ◽  
Net To Gross

The Mauddud reservoir, Khabaz oil field which is considered one of the main carbonate reservoirs in the north of Iraq. Recognizing carbonate reservoirs represents challenges to engineers because reservoirs almost tend to be tight and overall heterogeneous. The current study concerns with geological modeling of the reservoir is an oil-bearing with the original gas cap. The geological model is establishing for the reservoir by identifying the facies and evaluating the petrophysical properties of this complex reservoir, and calculate the amount of hydrocarbon. When completed the processing of data by IP interactive petrophysics software, and the permeability of a reservoir was calculated using the concept of hydraulic units then, there are three basic steps to construct the geological model, starts with creating a structural, facies and property models. The reservoirs were divided into four zones depending on the variation of petrophysical properties (porosity and permeability). Nine wells that penetrate the Cretaceous Formation (Mauddud reservoir) are included to construct the geological model. Zone number three characterized as the most important due to it Is large thickness which is about 108 m and good petrophysical properties are about 13%, 55 md, 41% and 38% for porosity, permeability, water saturation and net to gross respectively. The initial oil and gas in place are evaluated to be about 981×106 STB and 400×109 SCF.

scholarly journals Geological Model of the Tight Reservoir (Sadi Reservoir-Southern of Iraq)

2019 ◽  
Vol 25 (6) ◽  
pp. 30-43
Author(s):  
Ameer Kadhum Noori ◽  
Samaher A. Lazim ◽  
Ahmed A. Ramadhan
Keyword(s):  
Water Saturation ◽  
Oil Field ◽  
Log Analysis ◽  
Well Log ◽  
Geological Model ◽  
Tight Reservoir ◽  
Petrophysical Model ◽  
Well Log Analysis ◽  
Log Interpretation ◽  
Available Information

A3D geological model was constructed for Al-Sadi reservoir/ Halfaya Oil Field which is discovered in 1976 and located 35 km from Amara city, southern of Iraq towards the Iraqi/ Iranian borders. Petrel 2014 was used to build the geological model. This model was created depending on the available information about the reservoir under study such as 2D seismic map, top and bottom of wells, geological data & well log analysis (CPI). However, the reservoir was sub-divided into 132x117x80 grid cells in the X, Y&Z directions respectively, in order to well represent the entire Al-Sadi reservoir. Well log interpretation (CPI) and core data for the existing 6 wells were the basis of the petrophysical model (Porosity, Water saturation, & Permeability) that were distributed for all the created grids and then upscaled.  

scholarly journals Petrophysical Properties and Digenetic Evolution of Shuaiba Formation in Nasiriyah Oil Field, Southern Iraq

2021 ◽  
pp. 4810-4818
Author(s):  
Marwah H. Khudhair
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
Middle Part ◽  
Effective Porosity ◽  
Oil Field ◽  
Neutron Density ◽  
Petrophysical Properties ◽  
Secondary Porosity ◽  
Primary Porosity ◽  
Gamma Ray Log

     Shuaiba Formation is a carbonate succession deposited within Aptian Sequences. This research deals with the petrophysical and reservoir characterizations characteristics of the interval of interest in five wells of the Nasiriyah oil field. The petrophysical properties were determined by using different types of well logs, such as electric logs (LLS, LLD, MFSL), porosity logs (neutron, density, sonic), as well as gamma ray log. The studied sequence was mostly affected by dolomitization, which changed the lithology of the formation to dolostone and enhanced the secondary porosity that replaced the primary porosity. Depending on gamma ray log response and the shale volume, the formation is classified into three zones. These zones are A, B, and C, each can be split into three rock intervals in respect to the bulk porosity measurements. The resulted porosity intervals are: (I) High to medium effective porosity, (II) High to medium inactive porosity, and (III) Low or non-porosity intervals. In relevance to porosity, resistivity, and water saturation points of view, there are two main reservoir horizon intervals within Shuaiba Formation. Both horizons appear in the middle part of the formation, being located within the wells Ns-1, 2, and 3. These intervals are attributed to high to medium effective porosity, low shale content, and high values of the deep resistivity logs. The second horizon appears clearly in Ns-2 well only.

scholarly journals 3D geological modeling of the Upper Cretaceous reservoirs in GPT oil field, Abu Sennan area, Western Desert, Egypt

2019 ◽  
Vol 10 (2) ◽  
pp. 371-393
Author(s):  
Mohamed F. Abu-Hashish ◽  
Hamdalla A. Wanas ◽  
Emad Madian
Keyword(s):  
Seismic Data ◽  
Upper Cretaceous ◽  
Structural Model ◽  
Oil Field ◽  
Western Desert ◽  
Geological Model ◽  
3D Geological Modeling ◽  
Petrophysical Analysis ◽  
3D Geological Model ◽  
Property Modeling

Abstract This study aims to construct 3D geological model using the integration of seismic data with well log data for reservoir characterization and development of the hydrocarbon potentialities of the Upper Cretaceous reservoirs of GPT oil field. 2D seismic data were used to construct the input interpreted horizon grids and fault polygons. The horizon which cut across the wells was used to perform a comprehensive petrophysical analysis. Structural and property modeling was distributed within the constructed 3D grid using different algorithms. The workflow of the 3D geological model comprises mainly the structural and property modeling. The structural model includes fault framework, pillar girding, skeleton girding, horizon modeling and zonation and layering modeling processes. It shows system of different oriented major and minor faults trending in NE–SW direction. The property modeling process was performed to populate the reservoir facies and petrophysical properties (volume of shale (Vsh), fluid saturations (Sw and Sh), total and effective porosities (Φt and Φe), net to gross thickness and permeability) as extracted from the available petrophysical analysis of wells inside the structural model. The model represents a detailed zonation and layering configuration for the Khoman, Abu Roash and Bahariya formations. The 3D geological model helps in the field development and evaluates the hydrocarbon potentialities and optimizes production of the study area. It can be also used to predict reservoir shape and size, lateral continuity and degree of interconnectivity of the reservoir, as well as its internal heterogeneity.

scholarly journals The Evaluation of Reservoir Quality of Mishrif Formation in South and North Domes of Buzurgan Oil Field

2019 ◽  
Vol 9 (4) ◽  
pp. 89-106
Author(s):  
Ali Duair Jaafar ◽  
Dr. Medhat E. Nasser
Keyword(s):  
Physical Properties ◽  
Water Saturation ◽  
Oil Field ◽  
Reservoir Quality ◽  
Petrophysical Properties ◽  
The South ◽  
Reservoir Properties ◽  
Formation Evaluation ◽  
The North

Buzurgan field in the most cases regards important Iraqi oilfield, and Mishrif Formation is the main producing reservoir in this field, the necessary of so modern geophysical studies is necessity for description and interpret the petrophysical properties in this field. Formation evaluation has been carried out for Mishrif Formation of the Buzurgan oilfield depending on logs data. The available logs data were digitized by using Neuralog software. A computer processed interpretation (CPI) was done for each one of the studied wells from south and north domes using Techlog software V2015.3 in which the porosity, water saturation, and shale content were calculated. And they show that MB21 reservoir unit has the highest thickness, which ranges between (69) m in north dome to (83) m in south dome, and the highest porosity, between (0.06 - 0.16) in the north dome to (0.05 -0.21) in the south dome. The water saturation of this unit ranges between (25% -60%) in MB21 of north dome. It also appeared that the water saturation in the unit MB21 of south dome has the low value, which is between (16% - 25%). From correlation, the thickness of reservoir unit MB21 increases towards the south dome, while the thickness of the uppermost barrier of Mishrif Formation increases towards the north dome. The reservoir unit MB21 was divided into 9 layers due to its large thickness and its important petrophysical characterization. The distribution of petro physical properties (porosity and water saturation) has shown that MB 21 has good reservoir properties.

Sign in / Sign up

Export Citation Format

Share Document