scholarly journals The Evaluation of Reservoir Quality of Mishrif Formation in South and North Domes of Buzurgan Oil Field

2019 ◽  
Vol 9 (4) ◽  
pp. 89-106
Author(s):  
Ali Duair Jaafar ◽  
Dr. Medhat E. Nasser
Keyword(s):  
Physical Properties ◽  
Water Saturation ◽  
Oil Field ◽  
Reservoir Quality ◽  
Petrophysical Properties ◽  
The South ◽  
Reservoir Properties ◽  
Formation Evaluation ◽  
The North

Buzurgan field in the most cases regards important Iraqi oilfield, and Mishrif Formation is the main producing reservoir in this field, the necessary of so modern geophysical studies is necessity for description and interpret the petrophysical properties in this field. Formation evaluation has been carried out for Mishrif Formation of the Buzurgan oilfield depending on logs data. The available logs data were digitized by using Neuralog software. A computer processed interpretation (CPI) was done for each one of the studied wells from south and north domes using Techlog software V2015.3 in which the porosity, water saturation, and shale content were calculated. And they show that MB21 reservoir unit has the highest thickness, which ranges between (69) m in north dome to (83) m in south dome, and the highest porosity, between (0.06 - 0.16) in the north dome to (0.05 -0.21) in the south dome. The water saturation of this unit ranges between (25% -60%) in MB21 of north dome. It also appeared that the water saturation in the unit MB21 of south dome has the low value, which is between (16% - 25%). From correlation, the thickness of reservoir unit MB21 increases towards the south dome, while the thickness of the uppermost barrier of Mishrif Formation increases towards the north dome. The reservoir unit MB21 was divided into 9 layers due to its large thickness and its important petrophysical characterization. The distribution of petro physical properties (porosity and water saturation) has shown that MB 21 has good reservoir properties.

scholarly journals Hartha Formation divisions Based on Well Logs Analysis in Majnoon Oil Field, Southern Iraq

2020 ◽  
pp. 1362-1369
Author(s):  
Gheed Chaseb ◽  
Thamer A. Mahdi
Keyword(s):  
Water Saturation ◽  
Effective Porosity ◽  
Oil Field ◽  
Well Logs ◽  
Petrophysical Properties ◽  
Reservoir Properties ◽  
Thin Sections ◽  
Facies Associations ◽  
Log Interpretation ◽  
Well Logs Interpretation

This study aims to evaluate reservoir characteristics of Hartha Formation in Majnoon oil field based on well logs data for three wells (Mj-1, Mj-3 and Mj-11). Log interpretation was carried out by using a full set of logs to calculate main petrophysical properties such as effective porosity and water saturation, as well as to find the volume of shale. The evaluation of the formation included computer processes interpretation (CPI) using Interactive Petrophysics (IP) software.  Based on the results of CPI, Hartha Formation is divided into five reservoir units (A1, A2, A3, B1, B2), deposited in a ramp setting. Facies associations is added to well logs interpretation of Hartha Formation, and was inferred by a microfacies analysis of thin sections from core and cutting samples. The CPI shows that the A2 is the main oil- bearing unit, which is characterized by good reservoir properties, as indicated by high effective porosity, low water saturation, and low shale volume. Less important units include A1 and A3, because they have low petrophysical properties compared to the unit A2.

scholarly journals Evaluation of Petrophysical Properties Using Well Logs of Yamama Formation in Abu Amood Oil Field, Southern Iraq

2021 ◽  
Vol 54 (1E) ◽  
pp. 67-77
Author(s):  
Buraq Adnan Al-Baldawi
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
Bulk Water ◽  
Carbonate Reservoir ◽  
Oil Field ◽  
Well Logs ◽  
Water Volume ◽  
High Porosity ◽  
Petrophysical Properties ◽  
Reservoir Properties

The petrophysical analysis is very important to understand the factors controlling the reservoir quality and production wells. In the current study, the petrophysical evaluation was accomplished to hydrocarbon assessment based on well log data of four wells of Early Cretaceous carbonate reservoir Yamama Formation in Abu-Amood oil field in the southern part of Iraq. The available well logs such as sonic, density, neutron, gamma ray, SP, and resistivity logs for wells AAm-1, AAm-2, AAm-3, and AAm-5 were used to delineate the reservoir characteristics of the Yamama Formation. Lithologic and mineralogic studies were performed using porosity logs combination cross plots such as density vs. neutron cross plot and M-N mineralogy plot. These cross plots show that the Yamama Formation consists mainly of limestone and the essential mineral components are dominantly calcite with small amounts of dolomite. The petrophysical characteristics such as porosity, water and hydrocarbon saturation and bulk water volume were determined and interpreted using Techlog software to carried out and building the full computer processed interpretation for reservoir properties. Based on the petrophysical properties of studied wells, the Yamama Formation is divided into six units; (YB-1, YB-2, YB-3, YC-1, YC-2 and YC-3) separated by dense non porous units (Barrier beds). The units (YB-1, YB-2, YC-2 and YC-3) represent the most important reservoir units and oil-bearing zones because these reservoir units are characterized by good petrophysical properties due to high porosity and low to moderate water saturation. The other units are not reservoirs and not oil-bearing units due to low porosity and high-water saturation.

scholarly journals Geological Model for Mauddud Reservoir Khabaz Oil Field

2021 ◽  
Vol 54 (1D) ◽  
pp. 29-42
Author(s):  
Rayan Ahmed
Keyword(s):  
Oil And Gas ◽  
Water Saturation ◽  
Oil Field ◽  
Carbonate Reservoirs ◽  
Geological Model ◽  
Petrophysical Properties ◽  
Geological Modeling ◽  
The North ◽  
Porosity And Permeability ◽  
Net To Gross

The Mauddud reservoir, Khabaz oil field which is considered one of the main carbonate reservoirs in the north of Iraq. Recognizing carbonate reservoirs represents challenges to engineers because reservoirs almost tend to be tight and overall heterogeneous. The current study concerns with geological modeling of the reservoir is an oil-bearing with the original gas cap. The geological model is establishing for the reservoir by identifying the facies and evaluating the petrophysical properties of this complex reservoir, and calculate the amount of hydrocarbon. When completed the processing of data by IP interactive petrophysics software, and the permeability of a reservoir was calculated using the concept of hydraulic units then, there are three basic steps to construct the geological model, starts with creating a structural, facies and property models. The reservoirs were divided into four zones depending on the variation of petrophysical properties (porosity and permeability). Nine wells that penetrate the Cretaceous Formation (Mauddud reservoir) are included to construct the geological model. Zone number three characterized as the most important due to it Is large thickness which is about 108 m and good petrophysical properties are about 13%, 55 md, 41% and 38% for porosity, permeability, water saturation and net to gross respectively. The initial oil and gas in place are evaluated to be about 981×106 STB and 400×109 SCF.

Depositional facies, diagenetic clay minerals and reservoir quality of Rotliegend sediments in the Southern Permian Basin (North Sea): a review

Clay Minerals ◽  
1982 ◽  
Vol 17 (1) ◽  
pp. 55-67 ◽  
Author(s):  
U. Seemann
Keyword(s):  
Clay Minerals ◽  
North Sea ◽  
Effective Porosity ◽  
Hydrocarbon Exploration ◽  
Reservoir Quality ◽  
Burial Diagenesis ◽  
Permian Basin ◽  
Northern Margin ◽  
The North

AbstractThe Southern Permian Basin of the North Sea represents an elongate E-W oriented depo-centre along the northern margin of the Variscan Mountains. During Rotliegend times, three roughly parallel facies belts of a Permian desert developed, these following the outline of the Variscan Mountains. These belts were, from south to north, the wadi facies, the dune and interdune facies, and the sabkha and desert lake facies. The bulk of the gas reservoirs of the Rotliegend occur in the aeolian dune sands. Their recognition, and the study of their geometry, is therefore important in hydrocarbon exploration. Equally important is the understanding of diagenesis, particularly of the diageneticaily-formed clay minerals, because they have an important influence on the reservoir quality of these sands. Clay minerals were introduced to the aeolian sands during or shortly after their deposition in the form of air-borne dust, which later formed thin clay films around the grains. During burial diagenesis, these clay films may have acted as crystallization nuclei for new clay minerals or for the transformation of existing ones. Depending on their crystallographic habit, the clay minerals can seriously affect the effective porosity and permeability of the sands.

scholarly journals Petrophysical Properties and Digenetic Evolution of Shuaiba Formation in Nasiriyah Oil Field, Southern Iraq

2021 ◽  
pp. 4810-4818
Author(s):  
Marwah H. Khudhair
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
Middle Part ◽  
Effective Porosity ◽  
Oil Field ◽  
Neutron Density ◽  
Petrophysical Properties ◽  
Secondary Porosity ◽  
Primary Porosity ◽  
Gamma Ray Log

     Shuaiba Formation is a carbonate succession deposited within Aptian Sequences. This research deals with the petrophysical and reservoir characterizations characteristics of the interval of interest in five wells of the Nasiriyah oil field. The petrophysical properties were determined by using different types of well logs, such as electric logs (LLS, LLD, MFSL), porosity logs (neutron, density, sonic), as well as gamma ray log. The studied sequence was mostly affected by dolomitization, which changed the lithology of the formation to dolostone and enhanced the secondary porosity that replaced the primary porosity. Depending on gamma ray log response and the shale volume, the formation is classified into three zones. These zones are A, B, and C, each can be split into three rock intervals in respect to the bulk porosity measurements. The resulted porosity intervals are: (I) High to medium effective porosity, (II) High to medium inactive porosity, and (III) Low or non-porosity intervals. In relevance to porosity, resistivity, and water saturation points of view, there are two main reservoir horizon intervals within Shuaiba Formation. Both horizons appear in the middle part of the formation, being located within the wells Ns-1, 2, and 3. These intervals are attributed to high to medium effective porosity, low shale content, and high values of the deep resistivity logs. The second horizon appears clearly in Ns-2 well only.

scholarly journals An Integrated Microfacies and Well Logs-Based Reservoir Characterization of Yamama Formation, Southern Iraq

2021 ◽  
pp. 3570-3586
Author(s):  
Mohanad M. Al-Ghuribawi ◽  
Rasha F. Faisal
Keyword(s):  
Reservoir Characterization ◽  
Water Saturation ◽  
Effective Porosity ◽  
Well Logs ◽  
Petrophysical Properties ◽  
Reservoir Properties ◽  
Thin Sections ◽  
Porosity And Permeability ◽  
South Of Iraq ◽  
Southern Iraq

     The Yamama Formation includes important carbonates reservoir that belongs to the Lower Cretaceous sequence in Southern Iraq. This study covers two oil fields (Sindbad and Siba) that are distributed Southeastern Basrah Governorate, South of Iraq. Yamama reservoir units were determined based on the study of cores, well logs, and petrographic examination of thin sections that required a detailed integration of geological data and petrophysical properties. These parameters were integrated in order to divide the Yamama Formation into six reservoir units (YA0, YA1, YA2, YB1, YB2 and YC), located between five cap rock units. The best facies association and petrophysical properties were found in the shoal environment, where the most common porosity types were the primary (interparticle) and secondary (moldic and vugs) . The main diagenetic process that occurred in YA0, YA2, and YB1 is cementation, which led to the filling of pore spaces by cement and subsequently decreased the reservoir quality (porosity and permeability). Based on the results of the final digital  computer interpretation and processing (CPI) performed by using the Techlog software, the units YA1 and YB2 have the best reservoir properties. The unit YB2 is characterized by a good effective porosity average, low water saturation, good permeability, and large thickness that distinguish it from other reservoir units.

scholarly journals Petrophysical Properties of Nahr Umar Formation in Nasiriya Oil Field

2020 ◽  
Vol 21 (3) ◽  
pp. 9-18
Author(s):  
Ahmed Abdulwahhab Suhail ◽  
Mohammed H. Hafiz ◽  
Fadhil S. Kadhim
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
Oil Field ◽  
Well Logs ◽  
High Porosity ◽  
Reservoir Properties ◽  
Petrophysical Parameters ◽  
Resistivity Logs ◽  
Lithology Prediction ◽  
Porosity And Permeability

   Petrophysical characterization is the most important stage in reservoir management. The main purpose of this study is to evaluate reservoir properties and lithological identification of Nahr Umar Formation in Nasiriya oil field. The available well logs are (sonic, density, neutron, gamma-ray, SP, and resistivity logs). The petrophysical parameters such as the volume of clay, porosity, permeability, water saturation, were computed and interpreted using IP4.4 software. The lithology prediction of Nahr Umar formation was carried out by sonic -density cross plot technique. Nahr Umar Formation was divided into five units based on well logs interpretation and petrophysical Analysis: Nu-1 to Nu-5. The formation lithology is mainly composed of sandstone interlaminated with shale according to the interpretation of density, sonic, and gamma-ray logs. Interpretation of formation lithology and petrophysical parameters shows that Nu-1 is characterized by low shale content with high porosity and low water saturation whereas Nu-2 and Nu-4 consist mainly of high laminated shale with low porosity and permeability. Nu-3 is high porosity and water saturation and Nu-5 consists mainly of limestone layer that represents the water zone.

An Integrated Petrophysical Workflow for Fluid Characterization and Contacts Identification Using NMR Continuous and Stationary Measurements in a High-Porosity Sandstone Formation, Offshore Norway

2021 ◽  
Vol 62 (2) ◽  
pp. 210-226
Author(s):  
Maciej Kozlowski ◽  
◽  
Diptaroop Chakraborty ◽  
Venkat Jambunathan ◽  
Peyton Lowrey ◽  
...  
Keyword(s):  
Relaxation Time ◽  
Data Quality ◽  
Spin Relaxation ◽  
North Sea ◽  
Column Height ◽  
Reservoir Quality ◽  
Formation Evaluation ◽  
The North ◽  
Nmr Data ◽  
Fluid Properties

The Alvheim Field in the Norwegian North Sea was discovered in 1998. Two wells were drilled in 2018 in the Gekko structure to confirm oil column height and to evaluate reservoir quality in the Heimdal Formation. A comprehensive wireline logging program, including NMR and formation testing, was optimized to reduce formation evaluation uncertainty. Evaluating fluid properties, oil column height, and reservoir quality were primary objectives. Well A was first drilled on the south of the structure, followed by Well B on the north of the structure. Reservoir quality encountered in both wells was very good, and a project to develop these resources is currently in the selection phase. Formation evaluation uncertainty encompassing pore geometry distribution, permeability, reservoir quality, and hydrocarbon identification are mitigated by studying the nuclear magnetic resonance (NMR) log response. NMR fluid typing has been widely used in the oil industry since the 1990s. NMR fluid typing today is a combination of the contrast of spin relaxation time T1, the spin-spin relaxation time T2 (T1T2), and the diffusivity (T2D) of formation fluids (Chen et al., 2016). NMR fluid typing can be obtained from a continuous log and/or stationary log measurements. This paper showcases excellent, textbook-quality NMR data, as well as the integration of NMR data in the petrophysical workflow. High-confidence fluid properties and fluid contacts are determined. This paper also highlights a comparison of NMR data acquired in stationary vs. continuous depth-based log modes in both wells. The continuous log data quality is equivalent to stationary data, implying continuous log data quality is sufficient for reliable NMR fluid properties evaluation without depending on time-consuming stationary NMR measurements. Reducing logging operations rig time is very advantageous in the North Sea, where drilling rig operations cost is high, and enhanced rig time management is constantly required.

scholarly journals Formation evaluation and reservoir characteristics of the Messinian Abu Madi sandstones in Faraskour Gas Field, onshore Nile Delta, Egypt

2020 ◽  
Author(s):  
Mahmoud Leila ◽  
Ali Eslam ◽  
Asmaa Abu El-Magd ◽  
Lobna Alwaan ◽  
Ahmed Elgendy
Keyword(s):  
Water Saturation ◽  
Nile Delta ◽  
Hydrocarbon Exploration ◽  
The Other ◽  
Reservoir Rock ◽  
Reservoir Quality ◽  
Pore System ◽  
Reservoir Properties ◽  
Gas Field ◽  
Irreducible Water Saturation

Abstract The Messinian Abu Madi Formation represents the most prospective reservoir target in the Nile Delta. Hydrocarbon exploration endeavors in Nile Delta over the last few decades highlighted some uncertainties related to the predictability and distribution of the Abu Madi best reservoir quality facies. Therefore, this study aims at delineating the factors controlling the petrophysical heterogeneity of the Abu Madi reservoir facies in Faraskour Field, northeastern onshore part of the Nile Delta. This work provides the very first investigation on the reservoir properties of Abu Madi succession outside the main canyon system. In the study area, Abu Madi reservoir is subdivided into two sandstone units (lower fluvial and upper estuarine). Compositionally, quartzose sandstones (quartz > 65%) are more common in the fluvial unit, whereas the estuarine sandstones are often argillaceous (clays > 15%) and glauconitic (glauconite > 10%). The sandstones were classified into four reservoir rock types (RRTI, RRTII, RRTIII, and RRTIV) having different petrophysical characteristics and fluid flow properties. RRTI hosts the quartzose sandstones characterized by mega pore spaces (R35 > 45 µm) and a very well-connected, isotropic pore system. On the other side, RRTIV constitutes the lowest reservoir quality argillaceous sandstones containing meso- and micro-sized pores (R35 > 5 µm) and a pore system dominated by dead ends. Irreducible water saturation increases steadily from RRTI (Swir ~ 5%) to RRTIV (Swir > 20%). Additionally, the gas–water two-phase co-flowing characteristics decrease significantly from RRTI to RRTIV facies. The gaseous hydrocarbons will be able to flow in RRTI facies even at water saturation values exceeding 90%. On the other side, the gas will not be able to displace water in RRTIV sandstones even at water saturation values as low as 40%. Similarly, the influence of confining pressure on porosity and permeability destruction significantly increases from RRTI to RRTIV. Accordingly, RRTI facies are the best reservoir targets and have high potentiality for primary porosity preservation.

scholarly journals An integrated analysis of mineralogical and microstructural characteristics and petrophysical properties of carbonate rocks in the lower Indus Basin, Pakistan

2019 ◽  
Vol 11 (1) ◽  
pp. 1151-1167
Author(s):  
Waheed Ali Abro ◽  
Abdul Majeed Shar ◽  
Kun Sang Lee ◽  
Asad Ali Narejo
Keyword(s):  
Thin Section ◽  
Carbonate Rocks ◽  
Carbonate Rock ◽  
Indus Basin ◽  
Reservoir Quality ◽  
Data Sets ◽  
Petrophysical Properties ◽  
X Ray ◽  
Lower Indus Basin

Abstract Carbonate rocks are believed to be proven hydrocarbon reservoirs and are found in various basins of Pakistan including Lower Indus Basin. The carbonate rock intervals of the Jakkher Group from Paleocene to Oligocene age are distributed in south-western part of Lower Indus Basin of Pakistan. However, there are limited published petrophysical data sets on these carbonate rocks and are essential for field development and risk reduction. To fill this knowledge gap, this study is mainly established to collect the comprehensive high quality data sets on petrophysical properties of carbonate rocks along with their mineralogy and microstructure. Additionally, the study assesses the impact of diagenesis on quality of the unconventional tight carbonate resources. Experimental techniques include Scanning Electronic Microscopy (SEM), Energy-Dispersive X-ray Spectroscopy (EDS), and X-ray diffraction (XRD), photomicrography, Helium porosity and steady state gas permeability. Results revealed that the porosity was in range of 2.12 to 8.5% with an average value of 4.5% and the permeability was ranging from 0.013 to 5.8mD. Thin section study, SEM-EDS, and XRD analyses revealed that the samples mostly contain carbon (C), calcium (Ca), and magnesium (Mg) as dominant elemental components.The main carbonate components observed were calcite, dolomite, micrite, Ferron mud, bioclasts and intermixes of clay minerals and cementing materials. The analysis shows that: 1) the permeability and porosity cross plot, the permeability and slippage factor values cross plots appears to be scattered, which showed weaker correlation that was the reflection of carbonate rock heterogeneity. 2) The permeability and clay mineralogy cross plots have resulted in poor correlation in these carbonate samples. 3) Several diagenetic processes had influenced the quality of carbonates of Jakkher Group, such as pore dissolution, calcification, cementation, and compaction. 4) Reservoir quality was mainly affected by inter-mixing of clay, cementation, presence of micrite muds, grain compactions, and overburden stresses that all lead these carbonate reservoirs to ultra-tight reservoirs and are considered to be of very poor quality. 5) SEM and thin section observations shows incidence of micro-fractures and pore dissolution tended to improve reservoir quality.

Sign in / Sign up

Export Citation Format

Share Document