scholarly journals APPLICATION OF INTERNET OF THINGS BASED ROOM SECURITY SYSTEM USING ANDROID APPLICATION

2022 ◽  
Vol 1 (4) ◽  
pp. 841-846
Author(s):  
Rafif Muhammad Irdian ◽  
Rafi Fredy Septianto ◽  
Aksen Winarto
Keyword(s):  
Internet Of Things ◽  
Radio Frequency Identification ◽  
Access Point ◽  
Security System ◽  
The Internet ◽  
Android Application ◽  
Identification Process ◽  
Frequency Identification ◽  
Verification Process ◽  
Or Organization

Along with the increasing crime rate of data theft that occurs, it takes a good room security system to maintain data security for a particular agency or organization. Something A good security system is a security system that can be monitored and controlled remotely using the internet or better known as IoT (Internet of Things). In this thesis will designed an IoT-based room security system using the Android application, this system works using several modules including RFID (Radio Frequency Identification) module, camera module and door lock solenoid. The RFID card in this RFID Module functions as an identification process for people who want to enter into the room. In addition, this RFID module also functions as a trigger for the camera to work to take pictures a picture of the person who wants to enter the room. The data obtained from the two modules later will be sent into the Android application. The admin of the room can carry out the verification process to allow or deny people who want to enter the room. The results of testing this system can be runs well when the internet speed of the access point is fast and stable, but less optimal when the internet speed of the access point is running slowly.

scholarly journals Research on Indoor Positioning Algorithm of Single Reader Based on Gated Recurrent Unit

2021 ◽  
pp. 1-10
Author(s):  
Jintao Tang ◽  
Lvqing Yang ◽  
Jiangsheng Zhao ◽  
Yishu Qiu ◽  
Yihui Deng
Keyword(s):  
Internet Of Things ◽  
Radio Frequency Identification ◽  
Indoor Positioning ◽  
The Internet ◽  
Positioning Accuracy ◽  
Frequency Identification ◽  
The Cost ◽  
Positioning Algorithm ◽  
Gated Recurrent Unit ◽  
The Internet Of Things

With the development of the Internet of Things and Radio Frequency Identification (RFID), indoor positioning technology as an important part of positioning technology, has been attracting much attention in recent years. In order to solve the problems of low precision, high cost and signal collision between readers, a new indoor positioning algorithm based on a single RFID reader combined with a Double-order Gated Recurrent Unit (GRU) are proposed in this paper. Firstly, the reader is moved along the specified direction to collect the sequential tag data. Then, the tag’s coordinate is taken as the target value to train models and compare them with existing algorithms. Finally, the best Gated Recurrent Unit positioning model is used to estimate the position of the tags. Experiment results show that the proposed algorithm can effectively improve positioning accuracy, reduce the number of readers, cut down the cost and eliminate the collisions of reader signals.

scholarly journals Privacy by design : principles as a foundation to a more secure Internet of Things

2021 ◽  
Author(s):  
Mohamad Oubai Al-Rejleh
Keyword(s):  
Internet Of Things ◽  
Radio Frequency Identification ◽  
Personal Data ◽  
The Internet ◽  
Quantified Self ◽  
Everyday Objects ◽  
Late 21St Century ◽  
Frequency Identification ◽  
Internet Networks ◽  
The Internet Of Things

The Internet of Things (IoT) is a revolutionary concept that emerged in the late 21st century, whereby everyday objects such as household items, cars, and wearables, equipped with sensors and (Radio Frequency Identification) RFID chips, can communicate with the internet and to their physical surroundings. These chips allow the connected items to share information, and allow the user to collect information about his/her “quantified self”, measuring personal data such as habits of usage, lifestyle, and location through internet networks. IoT enabled devices are designed to collect, store, share, and analyze of highly personal data ubiquitously and in real time. However, with this new affordance of connectivity, comes a potential loss of privacy for users, as ever increasing sets of personal data are collected and tracked. As such, there is a pressing need for privacy considerations to be embedded within the early stages of design of connected devices and networks.

Design and Development of an Internet of Things (IoT)-Based Anti-Theft System in Museum Cultural Relics Using RFID

2022 ◽  
pp. 168-180
Author(s):  
Sasikumar Gurumoorthy ◽  
L. Venkateswara Reddy ◽  
Sudhakaran Periakaruppan
Keyword(s):  
Internet Of Things ◽  
Radio Frequency Identification ◽  
The Internet ◽  
Security Measures ◽  
Photographic Camera ◽  
The World ◽  
Unique Identity ◽  
Frequency Identification ◽  
Hardware Component ◽  
The Internet Of Things

Art colonnades and museums all over the world are the first option for individuals to visit for the enhancement of the cultural life of people. To ensure their safety, museums have established numerous cultural security measures. Traditional strategies do not obstruct their pace entirely. They only use a computer in the museum to check individuals at the entrance and exit. Therefore, the authors proposed a gallery anti-stealing device created on the internet-of-things (IoT) technology that ensures security through passive readers/writers of RFID. Radio frequency identification (RFID) remains a system that practices isolated data storing and recovery and offers object tracking with a unique identity code. The system then sends sound and light warning information, while the photographic camera structure is triggered to capture a picture at the same time. The recognition of the accuracy in the hardware component of the device can be additionally enhanced by the use of this technology to increase the safety of museum equipment.

Exploring Secure Computing for the Internet of Things, Internet of Everything, Web of Things, and Hyperconnectivity

2017 ◽  
pp. 1-12 ◽  
Author(s):  
Maurice Dawson
Keyword(s):  
Internet Of Things ◽  
Radio Frequency Identification ◽  
The Internet ◽  
Web Of Things ◽  
Internet Of Everything ◽  
Secure Computing ◽  
The Everyday ◽  
Frequency Identification ◽  
Technological Platforms ◽  
The Internet Of Things

Secure computing is essential as environments continue to become intertwined and hyperconnected. As the Internet of Things (IoT), Web of Things (WoT), and the Internet of Everything (IoE) dominate the landscape of technological platforms, protection these complicated networks is important. The everyday person who wishes to have more devices that allow the ability to be connected needs to be aware of what threats they could be potentially exposing themselves to. Additionally, for the unknowing consumer of everyday products needs to be aware of what it means to have sensors, Radio Frequency IDentification (RFID), Bluetooth, and WiFi enabled products. This submission explores how Availability, Integrity, and Confidentiality (AIC) can be applied to IoT, WoT, and IoE with consideration for the application of these architectures in the defense sector.

scholarly journals Augmented RFID Technologies for the Internet of Things and Beyond

Sensors ◽  
2020 ◽  
Vol 20 (4) ◽  
pp. 987
Author(s):  
Luciano Tarricone ◽  
Jasmin Grosinger
Keyword(s):  
Internet Of Things ◽  
Complex Systems ◽  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Cost Reduction ◽  
The Internet ◽  
Special Issue ◽  
Enabling Technologies ◽  
Frequency Identification ◽  
The Internet Of Things

Radio frequency identification (RFID) is one of the crucial enabling technologies for the Internet of Things (IoT). This is leading to a continuous augmentation of RFID technologies, in terms of sensing capabilities, energetic autonomy, usability, and cost affordability, and this special issue proposes an overview on such a challenging scenario. The proposed results, in terms of cost reduction, miniaturization, and compatibility with complex systems and technologies, as well as the identification of the relevant criticalities, also pave the way to future steps being taken that go beyond the current IoT.

Researches and Designs of Middleware Data Acquisition Function of Internet of Things

2012 ◽  
Vol 263-266 ◽  
pp. 2834-2837
Author(s):  
Lei Sang ◽  
Duo Long
Keyword(s):  
Internet Of Things ◽  
Data Acquisition ◽  
Radio Frequency Identification ◽  
The Internet ◽  
Middleware Technology ◽  
Frequency Identification ◽  
Key Issues ◽  
Electronic Tag ◽  
Research And Design ◽  
The Internet Of Things

The Internet of things covers many aspects such as the electronic tag reader research, the Internet of things software research and the e-commerce research, etc. The SAVANT middleware is one of the key issues of the study. Based on electronic product code, radio frequency identification technology and system description middleware technology, this paper focuses on research and design of the Internet of things middleware system to solve the problem of data acquisition.

RFID Tag Area Management Base on IOT

2013 ◽  
Vol 756-759 ◽  
pp. 4529-4532 ◽  
Author(s):  
Hao Zeng ◽  
Yan Hui Fu ◽  
Xu Chen
Keyword(s):  
Internet Of Things ◽  
Radio Frequency ◽  
Radio Frequency Identification ◽  
The Internet ◽  
Rfid Tag ◽  
Frequency Identification ◽  
The Right ◽  
The Internet Of Things ◽  
Area Management

Traditional Radio Frequency Identification (RFID) Tag Equipment has some problems like these: it is difficult to realize if the tag is kept out, destroyed, or taken away abnormally. It cant accurately judge where the area the tag had moved to is. Besides, it is difficult to distinguish the right of the tag in the Tag Management. To solve these issues, this paper serves with a method which is based on the Internet of Things (IOT). It mainly includes as the following: the tag is activated in the Controlled Area, the judgment of the tag access the Controlled Area, whether the tag exists in the Controlled Area or not. These methods can reform the problems that the Traditional RFID Tag Equipment has.

scholarly journals HABITAT: An IoT Solution for Independent Elderly

Sensors ◽  
2019 ◽  
Vol 19 (5) ◽  
pp. 1258 ◽  
Author(s):  
Elena Borelli ◽  
Giacomo Paolini ◽  
Francesco Antoniazzi ◽  
Marina Barbiroli ◽  
Francesca Benassi ◽  
...  
Keyword(s):  
Internet Of Things ◽  
Radio Frequency Identification ◽  
Life Quality ◽  
The Elderly ◽  
System Level ◽  
Smart Devices ◽  
The Internet ◽  
Wearable Electronics ◽  
Frequency Identification ◽  
The Internet Of Things

In this work, a flexible and extensive digital platform for Smart Homes is presented, exploiting the most advanced technologies of the Internet of Things, such as Radio Frequency Identification, wearable electronics, Wireless Sensor Networks, and Artificial Intelligence. Thus, the main novelty of the paper is the system-level description of the platform flexibility allowing the interoperability of different smart devices. This research was developed within the framework of the operative project HABITAT (Home Assistance Based on the Internet of Things for the Autonomy of Everybody), aiming at developing smart devices to support elderly people both in their own houses and in retirement homes, and embedding them in everyday life objects, thus reducing the expenses for healthcare due to the lower need for personal assistance, and providing a better life quality to the elderly users.

scholarly journals FTSMAC: A Multi-Channel Hybrid Reader Collision Avoidance Protocol for RFID Network

2021 ◽  
Vol 10 (3) ◽  
pp. 46
Author(s):  
Rachid Mafamane ◽  
Asmae Ait Mansour ◽  
Mourad Ouadou ◽  
Khalid Minaoui
Keyword(s):  
Internet Of Things ◽  
Collision Avoidance ◽  
Radio Frequency Identification ◽  
Stable State ◽  
High Density ◽  
The Internet ◽  
Mac Layer ◽  
Wide Range ◽  
Frequency Identification ◽  
The Internet Of Things

Due to the emergence of the Internet of Things, the need for effective identification and traceability has increased. Radio-frequency identification (RFID), a simple and cheap approach for gathering information, has therefore drawn the attention of research communities. However, this system suffers from problems caused by high density, such as collisions and duplication. Thus, the deployment of RFID is more effective in a dense environment where it may improve overage and delays. A wide range of solutions have been proposed; however, the majority of these are based on the application context. In this paper, we propose a general MAC layer protocol FTSMAC (Frequency Time Scheme MAC) in which the spectrum frequency is efficiently used by dividing the signal into different time slots via a messaging mechanism used by RFID readers. This limits the collisions in high-density RFID deployment that affect the performance of the system. Thus, our solution allows the communication system to converge to a stable state within a convenient time.

Sign in / Sign up

Export Citation Format

Share Document