scholarly journals Analysis and Experimental Characterization of Low Speed Direct Drive Fractional Slot Concentrated Winding Surface Permanent Magnet Synchronous Motor with Consequent Pole Rotor

2015 ◽  
Vol 10 (5) ◽  
pp. 2057-2061
Author(s):  
Shi-Uk Chung ◽  
Yon-Do Chun ◽  
Seok-Hwan Moon
Energies ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 432 ◽  
Author(s):  
Caixia Gao ◽  
Mengzhen Gao ◽  
Jikai Si ◽  
Yihua Hu ◽  
Chun Gan

A direct-drive motor has the merits of low speed, high torque, and elimination of mechanical deceleration mechanisms, and is widely used in various fields. A novel direct-drive permanent magnet synchronous motor is presented herein, in which all coils are wrapped around the stator yoke in the same orientation. The structure of the novel direct-drive permanent magnet synchronous motor with toroidal windings (N-TWDDPMSM) is introduced and its operating principle is analyzed by describing the variation in the armature magnet field versus time. Furthermore, based on the same power grade and mechanical size, several finite-element models of motors with different windings are established using Magnet software to analyze the distribution of magnetic field, back-electromotive force (back-EMF), power-angle characteristics, loss characteristics, etc. Compared with the traditional permanent magnet synchronous motor (T-PMSM), the traditional permanent magnet synchronous motor with toroidal windings (T-TWPMSM), and the N-TWDDPMSM, the N-TWDDPMSM shows advantages of low speed and high torque, and the feasibility and superiority of the N-TWDDPMSM are verified.


2012 ◽  
Vol 229-231 ◽  
pp. 888-894 ◽  
Author(s):  
Jun Guo Cui ◽  
Wen Sheng Xiao ◽  
Jian Bo Zhao ◽  
Jing Xi Lei ◽  
Xiao Dong Wu ◽  
...  

To meet the demands of direct-drive petroleum equipment, developed a low-speed and high-torque permanent magnet synchronous motor. By analyzing and identifying the suitable key parameters such as permanent magnet structure parameters, air gap length, type and size of Stator Slot and so on, designed permanent magnet synchronous motor with the torque 10800 Nm, the rated speed 30 r/min and high efficiency and power factor. Obtained the flux density distribution situation and characteristic curves under no-load working condition through simulation and analysis. Manufactured the low-speed and high-torque permanent magnet synchronous motor and applied it to pumping unit. Test results show that this motor has many advantages such as wide range of speed regulation, small torque ripple, smooth operation and other characteristics. The Direct-drive Pumping Unit used this permanent magnet synchronous motor can save 20% energy than the beam pumping unit, so its social and economic benefits are significant.


Sign in / Sign up

Export Citation Format

Share Document