STABILITY INDICATING UPLC METHOD FOR ESTIMATION OF METFORMIN HYDROCHLORIDE AND NATEGLINIDE SIMULTANEOUSLY IN THE PRESENCE OF STRESS DEGRADATION PRODUCTS

INDIAN DRUGS ◽  
2020 ◽  
Vol 57 (05) ◽  
pp. 56-64
Author(s):  
Rani A Prameela ◽  
S. Madhavi ◽  
Rao B. Tirumaleswara ◽  
Sudheer Reddy CH.
Keyword(s):  
Limit Of Detection ◽  
Degradation Products ◽  
Potassium Dihydrogen Phosphate ◽  
Metformin Hydrochloride ◽  
Forced Degradation ◽  
Dihydrogen Phosphate ◽  
Limit Of Quantification ◽  
Pharmaceutical Dosage Forms ◽  
Column Temperature

A novel Ultra Performance Liquid Chromatography (UPLC) method was developed and validated for the simultaneous determination of antidiabetic drugs metformin hydrochloride and nateglinide. The method was developed using a Waters ACQUITY UPLC SB C18 (100 × 2.1 mm, 1.8 μm) column. The mobile phase consisting of 0.01 % potassium dihydrogen phosphate buffer (pH 5.8): acetonitrile (50: 50 V/V) was used throughout the analysis. The flow rate was 0.3 mL/min, the injection volume was 1.0 μL, column temperature was 30 0C, run time 3 min and detection was carried at 238 nm using a TUV detector. The retention times of metformin hydrochloride and nateglinide were found to be 1.28 1.71 min, respectively. Metformin hydrochloride and nateglinide were found to be linear over the concentration range of 125-750 and 15-90 μg/mL. The limit of detection and the limit of quantification for metformin hydrochloride were found to be 0.22 and 0.68 μg/mL, respectively, and, for nateglinide, 0.02 and 0.6 μg/mL, respectively. Developed method was validated as per ICH guidelines. The specificity of the method was confirmed by forced degradation study. The suggested method is suitable for determination of metformin hydrochloride and nateglinide in bulk and pharmaceutical dosage forms.

scholarly journals A Stability Indicating UPLC Method for the Determination of Tramadol Hydrochloride: Application to Pharmaceutical Analysis

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
Kanakapura B. Vinay ◽  
Hosakere D. Revanasiddappa ◽  
Cijo M. Xavier ◽  
Pavagada J. Ramesh ◽  
Madihalli S. Raghu
Keyword(s):  
Limit Of Detection ◽  
Potassium Dihydrogen Phosphate ◽  
Reversed Phase ◽  
Forced Degradation ◽  
Dihydrogen Phosphate ◽  
Uv Detector ◽  
Limit Of Quantification ◽  
Tramadol Hydrochloride ◽  
Stability Indicating

The use of Ultra Performance Liquid Chromatography (UPLC), with a rapid 5-minute reversed phase isocratic separation on a 1.7 μm reversed-phase packing material to provide rapid ‘‘high throughput’’ support for tramadol hydrochloride (TMH) is demonstrated. A simple, precise and accurate stability-indicating isocratic UPLC method was developed for the determination of TMH in bulk drug and in its tablets. The method was developed using Waters Aquity BEH C18 column (100 mm × 2.1 mm, 1.7 μm) with mobile phase consisting of a mixture of potassium dihydrogen phosphate buffer of pH 2.8 and an equal volume of acetonitrile (60 : 40 v/v). The eluted compound was detected at 226 nm with a UV detector. The standard curve of mean peak area versus concentration showed an excellent linearity over a concentration range 0.5–300 μg mL−1 TMH with regression coefficient (r) value of 0.9999. The limit of detection (S/N =3) was 0.08 μg mL−1 and the limit of quantification (S/N =10) was 0.2 μg mL−1. Forced degradation of the bulk sample was conducted an accordance with the ICH guidelines. Acidic, basic, hydrolytic, oxidative, thermal and photolytic degradation were used to assess the stability indicating power of the method. TMH was found to degrade significantly in acidic, basic and oxidative stress conditions and stable in thermal, hydrolytic and photolytic conditions.

Development and Validation of Stability-Indicating HPLC Method for Roflumilast and Related Substances

2013 ◽  
Vol 781-784 ◽  
pp. 68-71 ◽  
Author(s):  
Fang Tan
Keyword(s):  
Limit Of Detection ◽  
Degradation Products ◽  
Reversed Phase ◽  
Hplc Method ◽  
Forced Degradation ◽  
Dihydrogen Phosphate ◽  
Column Temperature ◽  
Stability Indicating ◽  
Related Substances ◽  
Limit Of Quantitation

A reversed phase HPLC method was developed and validated for analysis of roflumilast, its related substances and degradation products, using Ecosil C18 column (250×4.6 mm, 5 μm) with a flow rate of 1.0 ml/min and detection wavelength of 215nm. The mobile phase was a mixture of acetonitrile and 0.005mol·L-1ammonium dihydrogen phosphate buffer pH 3.5 in the ratio of 48:52 (v/v). The samples were analyzed using 20 μl injection volume and the column temperature was maintained at 30°C. The limit of detection and limit of quantitation were found to be 2.6 ng/ml and 8ng/ml, respectively. The stability-indicating capability of method was established by forced degradation studies and method demonstrated successful separation of drug, its related substances and degradation products. The method is sensitive, specific, accurate, precise and stability indicating for the quantitation of drug, its related substances and other degradation compounds.

scholarly journals Analytical method development and validation for the determination of Brinzolamide by RP-HPLC

2020 ◽  
Vol 10 (1) ◽  
pp. 92-96
Author(s):  
Balakrishna Tiwari ◽  
Mrunal K. Shirsat ◽  
Amol Kulkarni
Keyword(s):  
Method Development ◽  
Limit Of Detection ◽  
Uv Spectroscopy ◽  
Potassium Dihydrogen Phosphate ◽  
Hplc Method ◽  
Dihydrogen Phosphate ◽  
Limit Of Quantification ◽  
Intermediate Precision ◽  
Rp Hplc

Brinzolamide is inhibitor of carbonic anhydride and is highly specific and non-competitive. The aim of the present study is to develop a simple, precise, accurate, sensitive RP-HPLC method for the determination of bulk drug. The objective of the method validation is to demonstrate whether the method was suited for the intended purpose. The method was validated as per the ICH guidelines. The method was validated for linearity, precision (repeatability, intermediate precision), accuracy, specificity, robustness, ruggedness, limit of detection and limit of quantification. Cosmosil (4.6X250mm, 5 μ) column was used for separation. The selected wavelength for Brinzolamide was 254 nm. The mobile phase consists of Acetonitrile: Potassium dihydrogen phosphate buffer (40:60). Flow rate was delivered at 1.0 mL/min. Appropriate dilutions of standard stock solutions were prepared to get desired concentrations in the range of 100-500 mcg/ml. The equation od standard curve was y = 441.8x + 1132 and R2 = 0.998. The RT obtained was 6.6167 minutes. Keywords: Brinzolamide, UV spectroscopy, RP-HPLC, ICH

scholarly journals Simultaneous Determination of Aceclofenac, Paracetamol and Chlorzoxazone by HPLC in Tablet Dose Form

2009 ◽  
Vol 6 (1) ◽  
pp. 289-294 ◽  
Author(s):  
Uttam D. Pawar ◽  
Abhijit V. Naik ◽  
Aruna V. Sulebhavikar ◽  
Tirumal A. Datar ◽  
Kiran. V. Mangaonkar
Keyword(s):  
Simultaneous Determination ◽  
High Performance ◽  
Limit Of Detection ◽  
Potassium Dihydrogen Phosphate ◽  
Standard Addition ◽  
High Performance Liquid Chromatographic ◽  
Reversed Phase ◽  
Dihydrogen Phosphate ◽  
Limit Of Quantification

A simple, fast and precise reversed phase high performance liquid chromatographic method is developed for the simultaneous determination of aceclofenac, paracetamol and chlorzoxazone. Chromatographic separation of the three drugs was performed on an Intersil C18column (250 mm × 4.6 mm, 5µm) as stationary phase with a mobile phase comprising of 10 mM potassium dihydrogen phosphate (pH adjusted to 5.55 with ammonia): acetonitrile in the ratio 60:40 (v/v) at a flow rate of 1.0 mL/min and UV detection at 205 nm. The linearity of aceclofenac, paracetamol and chlorzoxazone were in the range of 5.00-15.00 µg/µL, 25.00-75.00 µg/µL and 25.00-75.00 µg/µL respectively. The limit of detection for aceclofenac, paracetamol and chlorzoxazone was found to be 18.0 ng/mL, 22.0 ng/mL and 9.0 ng/mL respectively whereas, the limit of quantification was found to be 55 ng/mL, 65 ng/mL and 27.0 ng/mL respectively. The recovery was calculated by standard addition method. The average recovery was found to be 99.04%, 99.57% and 101.63% for aceclofenac, paracetamol and chlorzoxazone respectively. The proposed method was found to be accurate, precise and rapid for the simultaneous determination of aceclofenac, paracetamol and chlorzoxazone

scholarly journals DETERMINATION OF MEFENAMIC ACID IN A TOPICAL EMULGEL BY A VALIDATED HPLC METHOD

2019 ◽  
pp. 86-90
Author(s):  
APICHART ATIPAIRIN ◽  
SOMCHAI SAWATDEE
Keyword(s):  
Mefenamic Acid ◽  
High Performance ◽  
Limit Of Detection ◽  
Degradation Products ◽  
Hplc Method ◽  
Gelling Agent ◽  
Forced Degradation ◽  
Limit Of Quantification ◽  
Intermediate Precision

Objective: The present study is aimed to develop and validate a simple, precise and accurate high-performance liquid chromatography (HPLC) method, according to ASEAN guideline for the validation of the analytical procedure, for the determination of mefenamic acid in a topical emulgel preparation. Methods: An emulgel of 1 % mefenamic acid was prepared using carbopol 940 as a gelling agent and cremophor EL as an emulsifying agent. It was diluted with ethanol to make a sample concentration of 200 mg/ml. The method used a C18 column (5 µm; 250 x 4.6 mm) with the mobile phase, consisting of acetonitrile, acetic acid, and water in a ratio of 75:1:24. The column was maintained at 25 °C. The flow rate was 1 ml/min and the injection volume was 10 ml. The peak response was monitored by UV at 282 nm. It was validated for specificity, range, linearity, precision, accuracy, limit of detection (LOD) and limit of quantification (LOQ). In addition, forced degradation (hydrolysis, oxidation and dry heat) was performed to determine the capability of the proposed method to analyze the chemical stability of the drug samples during storage. Results: The method was specific to the drug while other excipients did not interfere with the quantitation of mefenamic acid. It was linear in the concentration range of 1.29 to 806 mg/ml. LOD and LOQ were 4.88 and 14.78 mg/ml, respectively. Accuracy of the method was demonstrated by recovery experiments on the synthetic mixture method and the mean percent recovery was 101.10±1.56. Repeatability and intermediate precision were rugged with %RSD values of 1.30 and 1.07, respectively. The method could separate mefenamic acid from other degradation products of forced degradation. Conclusion: The HPLC method presented herein is simple, accurate, sensitive and reproducible for the determination of mefenamic acid in an emulgel. It is served as a stability-indicating method and can be used for the analysis of the drug during product development and stability studies.

scholarly journals Stability-Indicating HPLC Method for the Simultaneous Determination of HIV Tablet Containing Emtricitabine, Tenofovir Disoproxil Fumarate, and Rilpivirine Hydrochloride in Pharmaceutical Dosage Forms

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
S. Venkatesan ◽  
N. Kannappan ◽  
Sai Sandeep Mannemala
Keyword(s):  
Tenofovir Disoproxil Fumarate ◽  
Degradation Products ◽  
Drug Product ◽  
Potassium Dihydrogen Phosphate ◽  
Hplc Method ◽  
Dihydrogen Phosphate ◽  
Combination Drug ◽  
Pharmaceutical Dosage Forms ◽  
Stability Indicating

A simple, accurate, rapid, and stability-indicating RP-HPLC method for a combination of tenofovir disoproxil fumarate, emtricitabine, and rilpivirine has been developed and subsequently validated in commercial tablets. The proposed HPLC method utilizes Phenomenex Gemini C18 column (150 mm × 4.6 mm i.d., 5 µm) and mobile phase consisting of MeCN, potassium dihydrogen phosphate buffer (20 mM, pH 3.3), and triethylamine 58.72 : 41.23 : 0.05 (v/v) at a flow rate of 1.7 mL/min. Quantitation was achieved with UV detection at 270 nm. The method was validated in terms of accuracy, precision, linearity, limits of detection, limits of quantitation, and robustness. This optimized method has been successively applied to pharmaceutical formulation and no interference from the tablet excipients was found. TDF, EMT, and RPV and their combination drug product were subjected to acid, base, neutral hydrolysis, oxidation, dry heat, and photolytic stress conditions and the stressed samples were analyzed by the proposed method. As the proposed LC method could effectively separate the drugs from its degradation products, it can be employed as stability-indicating method for the determination of instability of these drugs in bulk and commercial tablets.

scholarly journals Validated RP-HPLC Method for the Assay of Etoricoxib (A Non-Steroidal Anti-Inflammatory Drug) in Pharmaceutical Dosage Forms

2012 ◽  
Vol 9 (2) ◽  
pp. 832-838 ◽  
Author(s):  
Srinivasu Topalli ◽  
T. G. Chandrashekhar ◽  
M. Mathrusri Annapurna
Keyword(s):  
High Performance ◽  
Limit Of Detection ◽  
Potassium Dihydrogen Phosphate ◽  
Internal Standard ◽  
High Performance Liquid Chromatographic ◽  
Dosage Forms ◽  
Hplc Method ◽  
Dihydrogen Phosphate ◽  
Limit Of Quantification ◽  
Pharmaceutical Dosage Forms

A simple, accurate, sensitive and reproducible reverse phase high performance liquid chromatographic method has been developed for the quantitative determination of Etoricoxib in pharmaceutical dosage forms. The assay was performed on Hypersil ODS C-18 (250 x 4.6 mm., 5µm particle size) column using acetonitrile and potassium dihydrogen phosphate buffer (pH 4.2) (46:54 % v/v) as mobile phase with UV detection at 280 nm (flow rate 1.2 ml/min). Bromhexine was used as an internal standard. Quantization was achieved by measurement of the peak area ratio of the drug to the internal standard. The limit of detection (LOD) and the limit of quantification (LOQ) were 0.0704 µg ml-1and 0.2134 µg ml-1respectively. Each analysis required no longer than 10 minutes. The calibration curve was linear over the concentration range from 0.5-85.0 µg ml-1. The retention times of Etoricoxib and Bromhexine were found to be 3.083 and 7.631 minutes respectively. The proposed method was validated according to the ICH guidelines and can be used successfully to analyse marketed formulations.

scholarly journals A Rapid Stability-Indicating RP-HPLC Method for the Determination of Betaxolol Hydrochloride in Pharmaceutical Tablets

2013 ◽  
Vol 8 ◽  
pp. ACI.S11256 ◽  
Author(s):  
Sylvain Auvity ◽  
Fouad Chiadmi ◽  
Salvatore Cisternino ◽  
Jean-Eudes Fontan ◽  
Joël Schlatter
Keyword(s):  
High Performance ◽  
Degradation Products ◽  
Potassium Dihydrogen Phosphate ◽  
Reversed Phase ◽  
Hplc Method ◽  
Forced Degradation ◽  
Dihydrogen Phosphate ◽  
Stability Indicating ◽  
Rp Hplc

A stability-indicating reversed-phase high performance liquid chromatography (RP-HPLC) method was developed for the determination of betaxolol hydrochloride, a drug used in the treatment of hypertension and glaucoma. The desired chromatographic separation was achieved on a Nucleosil C18, 4 μm (150 × 4.6 mm) column, using isocratic elution at a 220 nm detector wavelength. The optimized mobile phase consisted of a 0.02 M potassium dihydrogen phosphate: methanol (40:60, v/v, pH 3.0 adjusted with o-phosphoric acid) as solvent. The flow rate was 1.6 mL/min and the retention time of betaxolol hydrochloride was 1.72 min. The linearity for betaxolol hydrochloride was in the range of 25 to 200 μg/mL. Recovery for betaxolol hydrochloride was calculated as 100.01%-101.35%. The stability-indicating capability was established by forced degradation experiments and the separation of unknown degradation products. The developed RP-HPLC method was validated according to the International Conference on Harmonization (ICH) guidelines. This validated method was applied for the estimation of betaxolol hydrochloride in commercially available tablets.

scholarly journals Development and Validation of a Rapid RP-HPLC Method for the Estimation of Esmolol Hydrochloride in Bulk and Pharmaceutical Dosage Forms

2010 ◽  
Vol 7 (3) ◽  
pp. 807-812 ◽  
Author(s):  
Vanita Somasekhar ◽  
D. Gowri Sankar
Keyword(s):  
Limit Of Detection ◽  
Hplc Method ◽  
Detector Response ◽  
Reverse Phase Hplc ◽  
Limit Of Quantification ◽  
Pharmaceutical Dosage Forms ◽  
Rp Hplc ◽  
Accuracy And Precision ◽  
Development And Validation

A reverse phase HPLC method is described for the determination of esmolol hydrochloride in bulk and injections. Chromatography was carried on a C18column using a mixture of acetonitrile, 0.05 M sodium acetate buffer and glacial acetic acid (35:65:3 v/v/v) as the mobile phase at a flow rate of 1 mL/min with detection at 275 nm. The retention time of the drug was 4.76 min. The detector response was linear in the concentration of 1-50 μg/mL. The limit of detection and limit of quantification was 0.614 and 1.86 μg/mL respectively. The method was validated by determining its sensitivity, linearity, accuracy and precision. The proposed method is simple, economical, fast, accurate and precise and hence can be applied for routine quality control of esmolol hydrochloride in bulk and injections.

Determination of Potential Genotoxic Impurity, 5-Amino-2-Chloropyridine, in Active Pharmaceutical Ingredient Using the HPLC-UV System

2020 ◽  
Author(s):  
Murat Soyseven ◽  
Rüstem Keçili ◽  
Hassan Y Aboul-Enein ◽  
Göksel Arli
Keyword(s):  
Analytical Method ◽  
High Performance ◽  
Orthophosphoric Acid ◽  
Limit Of Detection ◽  
Detection System ◽  
Active Pharmaceutical Ingredient ◽  
Limit Of Quantification ◽  
Column Temperature ◽  
Water Ph

Abstract A novel analytical method, based on high-performance liquid chromatography with a UV (HPLC-UV) detection system for the sensitive detection of a genotoxic impurity (GTI) 5-amino-2-chloropyridine (5A2Cl) in a model active pharmaceutical ingredient (API) tenoxicam (TNX), has been developed and validated. The HPLC-UV method was used for the determination of GTI 5A2Cl in API TNX. The compounds were separated using a mobile phase composed of water (pH 3 adjusted with orthophosphoric acid): MeOH, (50:50: v/v) on a C18 column (150 × 4.6 mm i.d., 2.7 μm) at a flow rate of 0.7 mL min−1. Detection was carried out in the 254 nm wavelength. Column temperature was maintained at 40°C during the analyses and 10 μL volume was injected into the HPLC-UV system. The method was validated in the range of 1–40 μg mL−1. The obtained calibration curves for the GTI compound was found linear with equation, y = 40766x − 1125,6 (R2 = 0.999). The developed analytical method toward the target compounds was accurate, and the achieved limit of detection and limit of quantification values for the target compound 5A2Cl were 0.015 and 0.048 μg mL−1, respectively. The recovery values were calculated and found to be between 98.80 and 100.03%. The developed RP-HPLC-UV analytical method in this research is accurate, precise, rapid, simple and appropriate for the sensitive analysis of target GTI 5A2Cl in model API TNX.

Sign in / Sign up

Export Citation Format

Share Document