scholarly journals RANCANG BANGUN ALAT PENYAMBUNG DAN PEMUTUS SUPLAI LISTRIK DENGAN MENGGUNAKAN RFID (RADIO FREQUENCY IDENTIFICATION) DAN SMS GATEWAY BERBASIS ARDUINO

Foristek ◽  
2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Januar Arief Rachman ◽  
Jumiyatun Jumiyatun ◽  
Sari Dewi
Keyword(s):  
Remote Control ◽  
Radio Frequency ◽  
Power Supply ◽  
Radio Frequency Identification ◽  
Electricity Demand ◽  
Electricity Supply ◽  
Final Project ◽  
Turn On ◽  
Need For Power ◽  
Frequency Identification

Electricity demand is increasing with the development of technology in various fields, such as agriculture, medicine, automotive and others. But for controlling electricity in a room or building there are still found to be less efficient. In controlling electricity or remote control using SMS need to pay attention to the signal that is on the SIM800L sms module. The way to get a signal is the need for power supply above 2 amperes for this SIM800L module. This final project produces a tool that can control electricity in a room that is connecting and disconnecting the electricity supply using an RFID card which can turn on and off each room, even more than two outputs at once, and use SMS media for remote control.

scholarly journals Sistem Keamanan Berlapis pada Ruangan Menggunakan RFID (Radio Frequency Identification) dan Keypad untuk Membuka Pintu Secara Otomatis

2014 ◽  
Vol 2 (3) ◽  
pp. 187-194
Author(s):  
Muhammad Chamdun ◽  
Adian Fatchur Rochim ◽  
Eko Didik Widianto
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Liquid Crystal Display ◽  
Dc Motor ◽  
Security System ◽  
Implementation Phase ◽  
Final Project ◽  
Infra Red ◽  
Frequency Identification ◽  
Security Device

This final project aims to design a door security device using RFID technology (Radio Frequency Identification) and the keypad as a method of access into the room. The system will automatically give warning when the code is entered incorrectly or burglars entered by breaking the door. The microcontroller that is used as the central data processing is ATMega 16 microcontroller ATMEL production and security sensors are used PIR (Passive Infra Red) and magnetic switches.The design begins with a schematic device hardware and software design using CodeVisionAVR programming. Implementation phase includes the implementation of the physical tools, programs, and sensors. The testing phase is done by testing the input sensors and exit switches, siren output devices, DC motor, LCD (Liquid Crystal Display), the RFID reader, keypad, and system controller.The results of room layered security system works according to design. PIR sensors can detect human activities and turn the LED lamp indicator on. Magnetic switch sensors will provide input to the microcontroller to enable or disable the DC motor as the room locking system. Admin menu that is accessed from the keypad is to add users, remove users, see registered users and change the password. User menu which is also accessed using the keypad, work as the room access using a username and password.This study resulted in the layered security. Room access is done using RFIDTag and password. The room piercing detection is done by sensor PIR (Passive Infra Red) and magnetic switches. Alarm used as a piercing action warning. This layered room safety device produces a better security system. 

scholarly journals PROTOTIPE INSTALASI PENERANGAN RUMAH PINTAR UNTUK APARTEMEN TIPE STUDIO BERBASIS MIKROKONTROLER

2020 ◽  
Vol 1 (2) ◽  
pp. 37-43
Author(s):  
Okke Dwi Wibowo ◽  
Irzan Zakir ◽  
Aris Sunawar
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Air Conditioning ◽  
Automated System ◽  
Input Device ◽  
C Language ◽  
Turn On ◽  
Frequency Identification ◽  
Led Lights ◽  
Passive Infrared

Abstract This study aims to create an automated system to turn off and turn on the lights. This research used experimental method. This prototype uses Arduino Mega 2560 with the programming language C language simplified with software IDE 1.5.4. an input device consists of three sensor Receiver Passive Infrared (PIR), 1 sensor Microphone (Voice), 1 sensor Radio Frequency Identification (RFID), and 1 sensor Light Dependent Resistance (LDR). Hardware output consists of 5 LED lights air conditioning and Solenoid. PIR is used to detect human presence, Voice sensor is used to turn on and turn off the room lights with applause, RFID sensors are used to unlock which is connected with the solenoid, LDR sensor is used to turn on and off lights that exist outside the home. The results obtained are the PIR sensor can only read infrared moving, RFID can not be read when unobstructed metal objects (iron) and LDR sensor works based on the intensity of light around, so it can be concluded that a prototype installation of lighting smart homes to apartment studio type microcontroller based, tools and systems can work in accordance with well-designed.   Abstrak Penelitian ini bertujuan membuat sistem otomatis dalam mematikan dan menghidupkan lampu. penelitian ini menggunakan metode eksperimen.Prototipe ini menggunakan Arduino Mega 2560 dengan bahasa pemrograman yaitu bahasa C yang disederhanakan dengan software IDE 1.5.4. peralatan input terdiri dari 3 sensor Passive Infrared Receiver (PIR), 1 sensor Microphone (Suara), 1 sensor Radio Frequency Identification (RFID), dan 1 sensor Light Dependent Resistance (LDR).Peralatan output terdiri dari 5 lampu LED AC dan Solenoid. PIR digunakan untuk mendeteksi keberadaan manusia, sensor Suara digunakan untuk menghidupkan dan mematikan lampu kamar dengan tepukan tangan, sensor RFID digunakan untuk membuka kunci yang disambungkan dengan solenoid, sensor LDR digunakan untuk menghidupkan dan mematikan lampu yang ada diluar rumah. Hasil yang telah didapat adalah sensor PIR hanya dapat membaca infrared yang bergerak, RFID tidak dapat membaca bila terhalang objek logam (besi) dan sensor LDR bekerja berdasarkan intensitas cahaya disekitar,sehinggadapatdisimpulkanbahwaprototipe instalasi penerangan rumah pintar untuk apartemen tipe studio berbasis mikrokontroler, alat dan sistem dapat bekerja sesuai dengan yang dirancang. dirancang.

The Design and Implementation of Remote Intelligent Conference Attendance System Based on RFID

2013 ◽  
Vol 427-429 ◽  
pp. 1017-1021
Author(s):  
Yan Fen Chang ◽  
Zhi Yuan Jin
Keyword(s):  
Remote Control ◽  
Radio Frequency ◽  
Real Time ◽  
Data Storage ◽  
Radio Frequency Identification ◽  
General Framework ◽  
Design And Implementation ◽  
Conference Management ◽  
Frequency Identification ◽  
Conference Attendance

The article draws lessons from radio frequency identification RFID identification results at home and abroad, put forward the general framework of RFID conference attendance system, to realize the higher requirements of the real-time conferencing electronic data storage, query, statistics and other functions, to realize the conference management be intelligent, barrier-free remote control.

Sign in / Sign up

Export Citation Format

Share Document