scholarly journals Determination of General and Specific Combining Ability of Five Upland Cotton Cultivars

2016 ◽  
Vol 8 (3) ◽  
pp. 106
Author(s):  
Habib R. Lakho ◽  
Ayaz A. Soomro ◽  
Muhammad A. R. Rashid ◽  
Shabana Memon
Keyword(s):  
Plant Height ◽  
Combining Ability ◽  
Upland Cotton ◽  
Block Design ◽  
Specific Combining Ability ◽  
Cotton Yield ◽  
Seed Cotton ◽  
Seed Cotton Yield ◽  
Diallel Mating Design ◽  
Seed Index

<p>The present investigation was aimed to determine the general combining ability of the parental lines and specific combining ability of the hybrids respectively and also heterotic effect of F<sub>1</sub> hybrids for some agro-economical traits in upland cotton. Five parent genotypes viz. NIAB-78, Chandi-95, Haridost, CRIS-134 and Shahbaz were used to generate ten F<sub>1</sub> hybrids through diallel mating design. The seeds of F<sub>1</sub> hybrids along with their parents were sown in Randomized Complete Block Design (RCBD) in three replications during 2009-10. All the traits showed highly significant variation and GCA and SCA variances were also significant for all the parameters studied. Among the parents, NIAB-78, Haridost and CRIS-134 were best general combiners for plant height, sympodial branches per plant, bolls per plant, boll weight, seed cotton yield per plant, GOT% and seed index. Cross NIAB-78×Chandi-95 was best specific combiner for plant height and bolls per plant and CRIS-134×Haridost for sympodial branches per plant. However, the hybrid Chandi-95×CRIS-134 proved best specific combiner for seed cotton yield per plant and GOT%, while NIAB-78×CRIS-134 gave maximum SCA effects for seed index.</p>

scholarly journals Gene Action Studies in the Inheritance of Yield and Quality Attributing Traits in Diallel Cross of Cotton (Gossypium hirsutum L.)

2021 ◽  
Vol 9 (3) ◽  
pp. 105-109
Author(s):  
V. J. Zapadiya ◽  
Keyword(s):  
Plant Height ◽  
Block Design ◽  
F1 Hybrids ◽  
Research Station ◽  
Cotton Yield ◽  
Seed Cotton ◽  
Gene Effects ◽  
Partial Dominance ◽  
Seed Cotton Yield ◽  
Genetic Components

A field experiment was conducted to evaluate the 45 F1 hybrids derived from 10×10 half diallel fashion along with ten parents and one standard check GN.Cot.Hy-14 were sown in randomized block design with three replications during kharif -2017 at Cotton Research Station, Junagadh Agricultural University, Junagadh. The genetic components of variation were determined for 12 characters viz., days to 50% flowering, days to 50% boll opening, plant height (cm), number of monopodia per plant, number of sympodia per plant, number of bolls per plant, boll weight (g), seed cotton yield per plant (g), ginning percentage (%), seed index (g), lint index (g) and oil percentage (%).The estimate of the components of variation revealed significant results for both additive (D) as well as dominance effects (H1 and H2) for all the characters except plant height non-significant H2 component, but in majority of traits (except plant height, lint index) H1 was higher than D indicating dominance components were important in the inheritance of seed cotton yield and its components. The average degree of dominance (H1/D)1/2 was found to be more than unity for all the traits (except plant height, number of monopodia per plant and lint index indicating partial dominance) indicating over dominance. Asymmetrical distribution of positive and negative genes in the parents was observed for all the traits. High estimates of heritability in narrow sense was observed for days to 50% flowering, days to 50 % boll bursting, number of monopodia per plant, ginning percentage (%), lint index (g) and oil content (%) suggesting that selection based on these attribute would lead to rapid improvement. Due to preponderance of non-additive gene effects of seed cotton yield per plant and most of its component traits, heterosis breeding would also be practically feasible in cotton.

scholarly journals Genetic Variability, Heritability and Correlation Studies in F2 Populations of Upland Cotton

2018 ◽  
Vol 61 (3) ◽  
pp. 136-144
Author(s):  
Muhammad Jurial Baloch ◽  
Rehana Lochi ◽  
Wajid Ali Jatoi ◽  
Abdul Wahid Baloch ◽  
Muhammad Ahmed Arain
Keyword(s):  
Upland Cotton ◽  
Block Design ◽  
Fibre Length ◽  
Cotton Yield ◽  
Seed Cotton ◽  
Node Number ◽  
Plant Seed ◽  
Seed Cotton Yield ◽  
Fibre Traits ◽  
Selection Of

A field experiment was conducted at the experimental area of the Department of Plant Breeding & Genetics, Sindh Agriculture University Tandojam, during the year 2014-2015 in order to carry-out genetic analysis in F2 populations of upland cotton. The trial was laid-out in a Randomized Complete Block Design with four replications. The material was consisted of eight parents and ten F2 populations. The analysis of variance revealed significant differences among the parents and F2 populations for all the traits studied except that fibre length was non-significant in parents.  The results further suggested that maximum heritability, higher genetic variances coupled with more genetic gains were expressed by the F2 populations CRIS-134 ´ CRIS-508 and CRIS-134 ´ CIM-598 for 1st sympodial node number; CRIS-134 ´ Neelum- 121 and CRIS-134 ´ CRIS-508 for sympodial branches/plant;  CRIS-342 ´ FH-113 for boll weight;  CRIS- 342 ´ Neelum-121 for bolls/plant, seed cotton yield/plant, lint % and micronaire value and progenies CRIS-342 ´ MNH-886 followed by CRIS-342 ´ Neelum-121  for staple length.  These results also suggested that a number of F2 populations indicated their potential for various seed cotton yield and fibre traits. The phenotypic correlations revealed that most of the traits were significantly and positively associated with seed cotton yield/plant.  However, higher correlations of sympodial branches/plant (r = 0.69**) and bolls/ plant (r = 0.82**) with seed cotton yield indicated that both the traits are more reliable as compared to other traits for selection of higher seed cotton yields. Very interestingly, fibre traits like lint%, fibre length and micronaire were also significantly correlated with seed cotton yield, suggesting that fibre quality traits can be improved without compromising on seed cotton yield. Thus, the material under study is very promising and worthy of selection to improve many traits simultaneously.

scholarly journals Genetic analysis of yield components and fiber quality parameters in upland cotton

1970 ◽  
pp. 13-19
Author(s):  
Bilal Nawaz, Saira Sattar, Tanwir Ahmad Malik
Keyword(s):  
Upland Cotton ◽  
Phenotypic Correlation ◽  
Cotton Yield ◽  
Seed Cotton ◽  
Seed Cotton Yield ◽  
Maximum Value ◽  
Fiber Fineness ◽  
Significant Difference ◽  
Boll Weight ◽  
Seed Index

The experiment was laid to analyze genetic features, genotypic and phenotypic correlation coefficients, path analysis with regression analysis among yield contributing traits in a selected F3 populations of upland cotton including parents. In this research experiment ANOVA showed significant difference among all individual plants in F3 populations. Monopodia per plant and bolls per plant possessed maximum value of PCV% and GCV%. Maximum broad sense heritability (≥ 90) was found in all recorded traits except seeds per boll, fiber length and lint percentage. Correlation studies revealed that Seed cotton yield positively correlated with all yield contributing traits i.e. plant height, monopodial branches per plant, Number of bolls per plant, boll weight, lint weight, seed index, lint index, seeds per boll, fiber fineness, fiber strength and fiber uniformity at both genotypic and phenotypic level whereas it depicted negative relationship with staple length. Path coefficient analysis showed that maximum direct positive effect was found of lint weight (2.6005) on seed cotton yield followed fiber fineness (1.2628), seed index (1.1449) and bolls per plant (1.0027). Regression study exhibited that maximum value of R2 for lint weight (0.9509) and boll weight (0.3735) depicted that 95.09% and 37.35% variation in the seed cotton yield, due to its relationship with lint weight and boll weight. It is concluded that there is a great genetic potential in F3 populations for mostly yield contributing traits for further enhancing yield. So those traits should be used as selection criteria during breeding for yield.

scholarly journals Study on Heterosis for Yield and Yield Contributing Traits in Desi Cotton (Gossypium arboreum L.)

2021 ◽  
Vol 10 (10) ◽  
pp. 129-141
Author(s):  
K. H. Deshmukh V. N. Chinchane ◽  
A. V. Shinde
Keyword(s):  
Block Design ◽  
Flowering Plant ◽  
Gossypium Arboreum ◽  
Cotton Yield ◽  
Seed Cotton ◽  
Seed Cotton Yield ◽  
Randomized Block Design ◽  
Boll Weight ◽  
Seed Index ◽  
Standard Heterosis

The present investigation entitled “Studies on Heterosis for Yield and Yield Contributing Traits in Desi Cotton (Gossypium arboreum L.) was undertaken with the objective to study the scale of heterosis over mid parent (Average heterosis), better parent (Heterobeltiosis) and standard check (Standard heterosis). The line x tester method of analysis was followed involving four females viz., PA 811, PA 839, PA 808 and PAIG 380 and six males viz. AKA 8, JLA 505, PA 812, AKA 7, PA 08 and Phule Dhanwantry for study of heterosis for various yield and yield contributing characters. The F1’s and theis parents were evaluated in Randomized Block Design with two replications. Observations were recorded on Days to 50 % flowering, Plant height (cm), Number of sympodia, Number of bolls/plant, Boll weight (g), Seed index, Seed cotton yield/plant (g) and Lint index. The magnitude of heterosis was highest for seed cotton yield per plant, which was recorded to the extent of 115.28 % over standard check PKV Suvarna in the cross PAIG 380 x AKA 8 followed by 109.68 % over standard check PKVDH 1.

scholarly journals Yield and some agronomic parameters of upland cotton as affected by planting dates

2020 ◽  
Vol 2 (1) ◽  
pp. 37
Author(s):  
Waqas Ahmed Lashari ◽  
Salma Naimatullah ◽  
Hamza Afzal
Keyword(s):  
Plant Height ◽  
Upland Cotton ◽  
Planting Date ◽  
Research Station ◽  
Cotton Yield ◽  
Seed Cotton ◽  
Planting Dates ◽  
Seed Cotton Yield ◽  
Average Maximum ◽  
Boll Weight

A field experiment was conducted at ICI Research Farm, Multan to evaluate the effect of different sowing dates on plant height, number of monopodia, number of sympodia, number of bolls per plant, boll weight, seed cotton yield kg/ha of two upland cotton varieties (ICI-2121 and ICI-2424) developed by ICI Pakistan Limited, Multan against a standard check variety IUB-2013 during 2019, and 2020 years.  These varieties were planted on 1st April, 15th April, 1st May, 15th May, 1st June, and 15th June, at ICI Cotton Research Station, 19-Kasi Vehari Road, Multan.  Results revealed that statistically highly significant differences in planting dates were observed for all the parameters studied except number of monopodial branches and boll weight which depicted non-significant differences. Regarding varieties and interaction between varieties and planting times, similar trend of statistical differences was observed. As regards to planting dates, generally, all the parameters under study showed their maximum performance when crop was planted on 1st May followed by 1st April planting date, whereas, minimum performance of the parameters was recorded when the crop was planted on 15th June followed by 1st June. Regarding varietal performance, on an average, maximum plant height (146cm) was observed in ICI-2121 followed by IUB-2013. Same trend of performance of varieties regarding number of monopodia and sympodia per plant was observed.  Regarding average number of bolls per plant in different varieties, it was observed that ICI-2121 produced maximum (32 bolls) followed by ICI-2424 (31 bolls) and IUB-2013 (28 bolls) irrespective of planting dates. The same trend of varietal performance regarding boll weight was recorded. When seed cotton yield (kg/ha) was evaluated, on an average of varieties, ICI-2121 produced maximum seed cotton yield (1228 kg/ha) followed by ICI-2424 and IUB-2013 which produced 1147 and 1046 kg/ha seed cotton yield respectively irrespective of planting dates. It was concluded that under agro-climatic conditions of Multan, 1st May planting date was evaluated as optimum cotton sowing time. Before or after 1st May, this study does not recommend growing cotton in this particular zone.  Among cotton varieties, ICI-2121 is recommended for sowing under this planting time being producing higher yields.

scholarly journals Heritability and correlation analysis of morphological and yield traits in genetically modified cotton

2020 ◽  
Author(s):  
Abdul Rehman ◽  
Nida Mustafa ◽  
Du Xiongming ◽  
Muhammad Tehseen Azhar
Keyword(s):  
Plant Height ◽  
Fiber Length ◽  
Fiber Strength ◽  
Cotton Yield ◽  
Seed Cotton ◽  
Plant Seed ◽  
Seed Cotton Yield ◽  
Fiber Fineness ◽  
Boll Weight ◽  
Seed Index

Abstract Background Cotton is known for its fiber and it is grown in tropical and sub-tropical areas of the world. It has a significant role in GDP of Pakistan. Therefore, present two years research was conducted to estimate heritability and association among various yield contributing parameters of cotton. The selected genotypes of cotton were hybridized in green house of the department. The F 0 cotton seed along with parents were planted in the field conditions during May, 2018. The sowing of this experiment was completed in three replications followed by RCBD. The data was recorded at maturity for various agronomic traits including plant height, number of bolls per plant, number of sympodial branches per plant, seed cotton yield, boll weight, seed index, ginning out turn, fiber length, fiber strength, and fiber fineness. Level of significance of data was computed by ANOVA to assess the difference among cotton genotypes which was used for estimation of heritability and correlation analysis among the related traits. Results Association analysis revealed that seed cotton yield had significant positive relationship with plant height, number of bolls per plant, number of sympodial branches per plant, ginning out turn, staple length and fiber strength. Staple length and fiber strength were negatively linked with each other. Estimates of heritability were high for all observed traits except number of sympodial branches per plant and boll weight. Conclusion The parent IUB-222 was found best for plant height, number of bolls per plant, boll weight, ginning out turn, seed cotton yield and seed index. NIAB-414 and VH-367 were identified best parents for fiber length, strength and fineness. Among crosses NIAB-414 × IUB-222 was best for number of bolls per plant, seed index, seed cotton yield and fiber fineness. Whereas, cross NIAB-414 × CIM-632 was good for plant height. The combination of A555 × CIM-632 was best for number of sympodial branches per plant, boll weight, fiber length and strength. VH-367 × CIM-632 proved best for ginning out turn. The correlation results from this study would be helpful to breed cotton cultivars with good yield and quality characters. Broad sense heritability was high for all of parameters which provides the strong evidence that selection in early generations can improve the performance of these traits.

scholarly journals Combining Ability Analysis for Seed Cotton Yield and Yield Contributing Traits in Desi Cotton (Gossypium arboreum L.) over the Environments

2021 ◽  
Vol 10 (10) ◽  
pp. 118-128
Author(s):  
V. N. Chinchane D. B. Deosarkar ◽  
K. S. Baig H. V. Kalpande
Keyword(s):  
Harvest Index ◽  
Dominant Role ◽  
Block Design ◽  
Cotton Yield ◽  
Seed Cotton ◽  
Plant Seed ◽  
Seed Cotton Yield ◽  
Randomized Block Design ◽  
Boll Weight ◽  
Seed Index

Cotton is one of the most important fiber and cash crop of India and plays a dominant role in the industrial and agricultural economy of the country. Fifty six crosses with fifteen parents and four checks viz., PKVDH 1, PKVSuvarna, NACH 12 and PA 255 were grown in Randomized Block Design with two replications. Pooled over the environments, the highest GCA effect for seed cotton yield plant was showed by line PAIG 346and also exhibited high GCA (in desirable direction) for the traits, sympodia per plant, number of bolls per plant, seed index, lint index and harvest index. Among the testers, highest GCA for seed cotton yield per plant (9.72) was reported in CNA 449.This tester showed significantly desirable GCA for the characters viz. plant height, number of sympodia per plant, number of bolls per plant, boll weight, seed index and harvest index. Pooled over the environments, among the crosses highest SCA for seed cotton yield per plant was reported in PA 740 x Digvijay. It has also exhibited significant SCA in desirable direction for days to 50 % boll bursting, number of sympodia per plant, number of bolls per plant, boll weight, seed index and harvest index. Another cross which ranked second for with high per se and high SCA for seed cotton yield per plant was PAIG 346 x DWDa 1402.It showed significantly desirable SCA for days to 50 % flowering, number of sympodia per plant, number of bolls per plant, seed index, lint index and harvest index.

scholarly journals Assessment of gene action and combining ability for fibre and yield contributing trais in interspecific and intraspecific hybrids of cotton

2018 ◽  
Vol 54 (No. 2) ◽  
pp. 71-77 ◽  
Author(s):  
S. Munir ◽  
M.K. Qureshi ◽  
A.N. Shahzad ◽  
H. Manzoor ◽  
M.A. Shahzad ◽  
...  
Keyword(s):  
Combining Ability ◽  
Gene Action ◽  
Cotton Yield ◽  
Seed Cotton ◽  
Additive Gene Action ◽  
Seed Cotton Yield ◽  
Boll Weight ◽  
Additive Gene ◽  
Seed Index ◽  
Staple Strength

Combining ability analysis was performed in order to identify high-yielding genotypes and hybrids. Six lines were crossed with three testers using a line × tester mating design. General combining ability (GCA) of parents, specific combining ability (SCA) of hybrids and gene action for several yield components and fibre were studied in the experiment. Additive gene action was observed in most traits except bolls/plant, sympodia/plant, monopodia/plant, total nodes, seed index, lint/seed, staple strength and seed cotton yield/plant which were influenced by non-additive gene action. GCA revealed that Giza-7 was a good general combiner for staple length, staple strength, seed index, boll weight, bolls/plant and monopodia/plant and BH-167 was good for ginning outturn (GOT) and sympodia/plant. Results of SCA values for hybrids indicated, that the cross Giza-7 × MNH-886 was a superior specific combiner for staple length, monopodia/plant, staple strength and seed cotton yield/plant; CIM-554 × CIM-557 for boll weight, sympodia/plant and lint weight/boll; BH-167 × MNH-886 for GOT and bolls/plant. Selection of such hybrids and good general combiners could be further exploited for yield improvement.

Combining ability analysis to identify suitable parents for heterosis in seed cotton yield, its components and lint % in upland cotton

2009 ◽  
Vol 29 (1) ◽  
pp. 108-115 ◽  
Author(s):  
Naqib Ullah Khan ◽  
Gul Hassan ◽  
Moula Bux Kumbhar ◽  
Khan Bahadar Marwat ◽  
Muhammad Azim Khan ◽  
...  
Keyword(s):  
Combining Ability ◽  
Upland Cotton ◽  
Cotton Yield ◽  
Seed Cotton ◽  
Seed Cotton Yield ◽  
Combining Ability Analysis
Sign in / Sign up

Export Citation Format

Share Document