scholarly journals Determination of Ideal Cooking Conditions for Pulp Production from Avocado Wood (Persea americana Mill.) by Kraft Method

2021 ◽  
Vol 72 (4) ◽  
pp. 411-416
Author(s):  
Gülşah Altunışık Bülbül ◽  
Ayhan Gençer
Keyword(s):  
Raw Materials ◽  
Persea Americana ◽  
Pulp Yield ◽  
Pulp Viscosity ◽  
Pulp Properties ◽  
Primary Basis ◽  
Pulp Production ◽  
Cooking Conditions ◽  
The Ideal

In this study, hand sheets were made from pulp produced by the Kraft method using avocado wood. The raw materials were supplied by a fruit orchard and consisted of avocado (Persea americana Mill.) trees that had completed their useful life and were cut during routine thinning maintenance. In order to determine the ideal cooking conditions in the production of pulp from avocado wood via the Kraft method, 16 cooks were carried out by varying the cooking time (T), active alkali (AA), and sulfidity (S) ratios. The general pulp properties, especially the screened pulp yield, pulp viscosity, and Kappa number, were evaluated. The pulp yield was taken as the primary basis in determining the cooking conditions. The ideal cooking conditions were also determined by considering some physical, mechanical, and optical properties of the paper. According to this study, the conditions found to be ideal in pulp production from avocado (Persea americana Mill.) wood via the Kraft method were: 18 % AA, 22 % S, and 75 min T.

scholarly journals Kraft pulp from budworm-infested Jack pine

Holzforschung ◽  
2006 ◽  
Vol 60 (4) ◽  
pp. 383-388
Author(s):  
J.Y. Zhu ◽  
Gary C. Myers
Keyword(s):  
Kraft Pulp ◽  
Visual Inspection ◽  
Raw Materials ◽  
Jack Pine ◽  
Pulp Yield ◽  
Tracheid Length ◽  
Pine Trees ◽  
Blue Stain ◽  
Pulp Production

Abstract This study evaluated the quality of kraft pulp from budworm-infested jack pine. The logs were classified as merchantable live, suspect, or merchantable dead. Raw materials were evaluated through visual inspection, analysis of the chemical composition, SilviScan measurement of the density, and measurement of the tracheid length. Unbleached pulps were then refined using a laboratory disk refiner. The mechanical and optical properties of handsheets made from the refined pulps were evaluated. Although budworm galleries may affect the physical integrity of the wood, they have no effect on pulp quality. Blue stain did not affect the handsheet brightness. The results indicate that merchantable dead jack pine trees are acceptable for kraft pulp production, with equivalent pulp yield.

Usability of field X-ray fluorescence analyzers for determination of the chemistry of cement raw materials - using an example of Mokrá Quarry

2016 ◽  
Author(s):  
Jiří Zimák ◽  
Kristýna Dalajková ◽  
Roman Donocik ◽  
Petr Krist ◽  
Daniel Reif ◽  
...  
Keyword(s):  
Raw Materials ◽  
X Ray

Liquid Chromatographic Determination of Amiodarone Hydrochloride and Related Compounds in Raw Materials and Tablets

1994 ◽  
Vol 77 (6) ◽  
pp. 1447-1453 ◽  
Author(s):  
Pauline M Lacrok ◽  
Norman M Curran ◽  
Wing-Wah Sy ◽  
Dennis K J Goreck ◽  
Pierre Thibault ◽  
...  
Keyword(s):  
Raw Materials ◽  
Chromatographic Determination ◽  
Raw Material ◽  
Liquid Chromatographic Method ◽  
Limit Of Quantitation ◽  
Liquid Chromatographic Determination ◽  
Liquid Chromatographic ◽  
Amiodarone Hydrochloride ◽  
Related Compounds

Abstract A liquid chromatographic method for the determination of amiodarone hydrochloride and 10 related compounds in drug raw material and for assay of drug in tablets was developed. The method specifies a 3 jxm Hypersil nitrile column (150 × 4.6 mm), a mobile phase of 1 + 1 acetonitrile–ammonium acetate buffer (0.1 M adjusted to pH 6.0 with 0.1 M acetic acid), a flow rate of 1 mL/min, and detection at 240 nm. The lower limit of quantitation of the related compounds is 0.02% or less. Drug contents in 2 raw material samples were 100.1 and 99.9% and ranged from 98.2 to 99.4% in 3 tablet formulations. Impurity levels in 2 samples of raw material from different manufacturers were ca 0.4%. The presence of 3 of the known related compounds in these samples was confirmed by liquid chromatographymass spectrometry. The method applied to raw materials was evaluated by a second laboratory and found to be satisfactory.

scholarly journals Mining Wastes of an Albite Deposit as Raw Materials for Vitrified Mullite Ceramics

Minerals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 232
Author(s):  
Pedro J. Sánchez-Soto ◽  
Eduardo Garzón ◽  
Luis Pérez-Villarejo ◽  
George N. Angelopoulos ◽  
Dolores Eliche-Quesada
Keyword(s):  
Particle Size ◽  
Raw Materials ◽  
Phase Evolution ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
Mining Wastes ◽  
X Ray Diffraction ◽  
X Ray ◽  
Maximum Value

In this work, an examination of mining wastes of an albite deposit in south Spain was carried out using X-ray Fluorescence (XRF), X-ray diffraction (XRD), particle size analysis, thermo-dilatometry and Differential Thermal Analysis (DTA) and Thermogravimetric (TG) analysis, followed by the determination of the main ceramic properties. The albite content in two selected samples was high (65–40 wt. %), accompanied by quartz (25–40 wt. %) and other minor minerals identified by XRD, mainly kaolinite, in agreement with the high content of silica and alumina determined by XRF. The content of Na2O was in the range 5.44–3.09 wt. %, being associated with albite. The iron content was very low (<0.75 wt. %). The kaolinite content in the waste was estimated from ~8 to 32 wt. %. The particle size analysis indicated values of 11–31 wt. % of particles <63 µm. The ceramic properties of fired samples (1000–1350 °C) showed progressive shrinkage by the thermal effect, with water absorption and open porosity almost at zero at 1200–1250 °C. At 1200 °C, the bulk density reached a maximum value of 2.38 g/cm3. An abrupt change in the phase evolution by XRD was found from 1150 to 1200 °C, with the disappearance of albite by melting in accordance with the predictions of the phase diagram SiO2-Al2O3-Na2O and the system albite-quartz. These fired materials contained as main crystalline phases quartz and mullite. Quartz was present in the raw samples and mullite was formed by decomposition of kaolinite. The observation of mullite forming needle-shape crystals was revealed by Scanning Electron Microscopy (SEM). The formation of fully densified and vitrified mullite materials by firing treatments was demonstrated.

Metabolic response to temperature stress in the Colombian freshwater crab Neostrengeria macropa (H. Milne Edwards, 1853) (Decapoda: Brachyura: Pseudothelphusidae)

2021 ◽  
Author(s):  
David M Hudson
Keyword(s):  
Metabolic Response ◽  
Infrastructure Development ◽  
Predator Prey ◽  
Temperature Range ◽  
Indicator Group ◽  
Response To Temperature ◽  
Performance Results ◽  
The City ◽  
The Ideal

Abstract Freshwater crustaceans are distributed throughout the montane and lowland areas of Colombia, and are therefore a useful indicator group for how aquatic species will respond to climate change. As such, metabolic determination of physiological performance was evaluated for the Colombian pseudothelphusid crab, Neostrengeria macropa (H. Milne Edwards, 1853), over a temperature range inclusive of current temperatures and those predicted by future scenarios in the plateau around the city of Bogotá, namely from 8 °C to 30 °C. The performance results mostly aligned with previous exploratory behavioral determination of the ideal temperature range in the same species, although the metabolism increased at the highest temperature treatments, a point when exploratory behavior declined. These results indicate that this species of montane crab behaviorally compensates for increased thermal stress by decreasing its physical activity, which could have negative predator-prey consequences with changes to community structure as different species undergo climate-mediated geographic range shifts in the region. As this species is endemic to the plateau surrounding Bogotá, it also experiences a number of other stressors to its survival, including infrastructure development and invasive species.

Sign in / Sign up

Export Citation Format

Share Document