scholarly journals Fracture Toughness of Concrete Containing Fly Ash

2018 ◽  
Author(s):  
Grzegorz Ludwik Golewski
Keyword(s):  
Fracture Toughness ◽  
Fly Ash

scholarly journals Studies of Fracture Toughness in Concretes Containing Fly Ash and Silica Fume in the First 28 Days of Curing

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 319
Author(s):  
Grzegorz Ludwik Golewski ◽  
Damian Marek Gil
Keyword(s):  
Fracture Toughness ◽  
Stress Intensity Factor ◽  
Stress Intensity ◽  
Fly Ash ◽  
Critical Stress ◽  
Critical Stress Intensity Factor ◽  
Early Age ◽  
Strength Parameters ◽  
Cement Binder ◽  
Mineral Additives

This paper presents the results of the fracture toughness of concretes containing two mineral additives. During the tests, the method of loading the specimens according to Mode I fracture was used. The research included an evaluation of mechanical parameters of concrete containing noncondensed silica fume (SF) in an amount of 10% and siliceous fly ash (FA) in the following amounts: 0%, 10% and 20%. The experiments were carried out on mature specimens, i.e., after 28 days of curing and specimens at an early age, i.e., after 3 and 7 days of curing. In the course of experiments, the effect of adding SF to the value of the critical stress intensity factor—KIcS in FA concretes in different periods of curing were evaluated. In addition, the basic strength parameters of concrete composites, i.e., compressive strength—fcm and splitting tensile strength—fctm, were measured. A novelty in the presented research is the evaluation of the fracture toughness of concretes with two mineral additives, assessed at an early age. During the tests, the structures of all composites and the nature of macroscopic crack propagation were also assessed. A modern and useful digital image correlation (DIC) technique was used to assess macroscopic cracks. Based on the conducted research, it was found the application of SF to FA concretes contributes to a significant increase in the fracture toughness of these materials at an early age. Moreover, on the basis of the obtained test results, it was found that the values of the critical stress intensity factor of analyzed concretes were convergent qualitatively with their strength parameters. It also has been demonstrated that in the first 28 days of concrete curing, the preferred solution is to replace cement with SF in the amount of 10% or to use a cement binder substitution with a combination of additives in proportions 10% SF + 10% FA. On the other hand, the composition of mineral additives in proportions 10% SF + 20% FA has a negative effect on the fracture mechanics parameters of concretes at an early age. Based on the analysis of the results of microstructural tests and the evaluation of the propagation of macroscopic cracks, it was established that along with the substitution of the cement binder with the combination of mineral additives, the composition of the cement matrix in these composites changes, which implies a different, i.e., quasi-plastic, behavior in the process of damage and destruction of the material.

Fracture behaviors of HVFA-SCC mixed with seawater and sea-sand under three-point bending

2022 ◽  
pp. 136943322110273
Author(s):  
Lingzhu Zhou ◽  
Yu Zheng ◽  
Linsheng Huo ◽  
Yuxiao Ye ◽  
Xiaolu Wang ◽  
...  
Keyword(s):  
Fracture Toughness ◽  
Fly Ash ◽  
Unstable Fracture ◽  
Replacement Ratio ◽  
Three Point Bending ◽  
Model Code ◽  
Softening Curve ◽  
Sea Sand ◽  
Fracture Behaviors ◽  
Tensile Softening

This paper aims to study the fracture behaviors of high-volume fly ash-self-compacting concrete (HVFA-SCC) mixed with seawater and sea-sand (SWSS) or freshwater and river sand (FWRS). Three-point bending test were performed on 24 notched beams fabricated with varying in replacement ratio of fly ash (0%, 30%, 50%, and 70%) and the type of water and sand (SWSS and FWRS). The initial and unstable fracture toughness of these test specimens are determined by the double- K fracture model. The effect of fly ash replacement ratio and type of water and sand on the fracture parameters is analyzed and discussed. In addition, the cohesive fracture toughness of all the test specimens is calculated by using Gauss–Chebyshev integral method and the weight function method based on the bilinear tensile softening curve given in CEP-FIP Model Code. A comparison of fracture toughness parameters of determined from the experimental approach and analytical approaches is presented in these SCC specimens. Results show that SCC mixed with SWSS replacing FWRS can improve the unstable fracture toughness and fracture energy, and decrease its brittleness behavior. The cohesive fracture toughness of SWSS-SCC specimens is underestimated by these analytical methods based on the tensile softening curve given in CEP-FIP Model Code.

Effects of Fly Ash Particle Sizes on the Compressive Strength and Fracture Toughness of High Performance Concrete

2011 ◽  
Vol 284-286 ◽  
pp. 984-988
Author(s):  
An Shun Cheng ◽  
Yue Lin Huang ◽  
Chung Ho Huang ◽  
Tsong Yen
Keyword(s):  
Fracture Toughness ◽  
Particle Size ◽  
Compressive Strength ◽  
Fly Ash ◽  
High Performance ◽  
High Performance Concrete ◽  
Concrete Strength ◽  
Bending Test ◽  
Strength Development ◽  
Particle Sizes

The study aims to research the effect of the particle size of fly ash on the compressive strength and fracture toughness of high performance concrete (HPC). In all HPC mixtures, the water-to-binder ratio selected is 0.35; the cement replacement ratios includes 0%, 10% and 20%; the particle sizes of fly ash have three types of passing through sieves No. 175, No. 250 and No. 325. Three-point-bending test was adopted to measure the load-deflection relations and the maximum loads to determine the fracture energy (GF) and the critical stress intensity factor (KSIC). Test results show that adding fly ash in HPC apparently enhances the late age strengths of HPC either for replacement ratio of 10% or 20%, in which the concrete with 10% fly ash shows the higher effect. In addition, the smaller the particle size is the better the late age concrete strength will be. The HPC with the finer fly ash can have higher strength development and the values of GF and KSIC due to the facts of better filling effect and pozzolanic reaction. At late age, the GF and KSIC values of concrete with 10% fly ash are all higher than those with 20% fly ash.

A Study of Mode III Fracture Toughness in Young and Mature Concrete with Fly Ash Additive

2016 ◽  
Vol 254 ◽  
pp. 120-125 ◽  
Author(s):  
Grzegorz Ludwik Golewski ◽  
Tomasz Sadowski
Keyword(s):  
Fracture Toughness ◽  
Fly Ash ◽  
Fracture Mechanics ◽  
Test System ◽  
Special Device ◽  
Mode Iii ◽  
Concrete Mixtures ◽  
Young Concrete ◽  
Torsional Test ◽  
Class F Fly Ash

A description of processes of formation and propagation of cracks in material requires the knowledge of all fracture mechanics parameters, i.e.: KIc, KIIcand KIIIc. In this study a new testing method and estimation of the fracture toughness in Mode III (antiplane shear) of concretes containing: 0, 20 and 30% volume content of the class F fly ash (FA) was proposed. Fracture toughness tests were performed on axial torsion machine MTS 809 Axial/Torsional Test System. The studies examined effect of FA additive on the parameter KIIIc. In order to determine the fracture toughness KIIIca special device was made. Experimental investigation under third mode fracture was carried out both in young and mature concrete composites (after: 3, 7, 28, 90, 180 and 365 days). 20% addition of FA as well as a 30% addition of FA causes a reduction in fracture toughness of young concrete. After 28 days of couring a significant increase of the KIIIc was noticed in composites with a 20% additive of FA while concrete mixtures with a higher additive of FA still had lower analyzed fracture mechanics parameter.

Sign in / Sign up

Export Citation Format

Share Document