Study of the Boundary Layer on Ship Forms

1970 ◽  
Vol 14 (03) ◽  
pp. 153-167
Author(s):  
W. C. Webster ◽  
T.T. Huang
Keyword(s):  
Boundary Layer ◽  
Shape Factor ◽  
Three Dimensional ◽  
Momentum Thickness ◽  
Flow Conditions ◽  
Integral Boundary ◽  
Outer Flow ◽  
Boundary Layer Equations ◽  
Pressure Distributions ◽  
Layer Flow

This paper presents a theoretical investigation of the development of the boundary layer about a ship. The "outer flow" conditions, including the streamlines and pressure distributions, are found from linearized, thin-ship theory using the method of Guilloton. Linearized, integral boundary-layer equations appropriate for three-dimensional turbulent flow are integrated numerically along the streamlines to determine the momentum thickness, the shape factor, and the angle of the boundary-layer flow to the outer flow. The results of computations for Series 60, block 0.60 and 0.80 are presented for various Froude numbers and ship lengths.

Three-Dimensional Boundary-Layer Flow About an Ablating Slender Cone

1969 ◽  
Vol 91 (4) ◽  
pp. 632-648 ◽  
Author(s):  
T. K. Fannelop ◽  
P. C. Smith
Keyword(s):  
Boundary Layer ◽  
Boundary Layer Flow ◽  
Cone Angle ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Low Reynolds Numbers ◽  
Boundary Layer Equations ◽  
Transverse Curvature ◽  
Dimensional Boundary ◽  
Layer Flow

A theoretical analysis is presented for three-dimensional laminar boundary-layer flow about slender conical vehicles including the effect of transverse surface curvature. The boundary-layer equations are solved by standard finite difference techniques. Numerical results are presented for hypersonic flow about a slender blunted cone. The influences of Reynolds number, cone angle, and mass transfer are studied for both symmetric flight and at angle-of-attack. The effects of transverse curvature are substantial at the low Reynolds numbers considered and are enhanced by blowing. The crossflow wall shear is largely unaffected by transverse curvature although the peak velocity is reduced. A simplified “channel flow” analogy is suggested for the crossflow near the wall.

Pohlhausen's Method for Three-Dimensional Laminar Boundary Layers

1951 ◽  
Vol 3 (1) ◽  
pp. 51-60 ◽  
Author(s):  
J. C. Cooke
Keyword(s):  
Boundary Layer ◽  
Three Dimensional ◽  
Elliptic Cylinder ◽  
Three Dimensions ◽  
Momentum Thickness ◽  
Laminar Boundary Layers ◽  
Displacement Thickness ◽  
Good For ◽  
Layer Flow ◽  
Accelerated Flow

SummaryWild has extended to three dimensions the von Kármán-Pohlhausen method for the laminar boundary layer flow over a fixed obstacle and used the method for an infinite yawed elliptic cylinder in a stream. In this paper the method is tested in two ways (which may be called full-Pohlhausen and semi-Pohlhausen) for the case of an infinite yawed cylinder when the velocity outside the boundary layer over the surface normal to the generators is of the form U=cxm. The exact solution is known in this case.A table of the skin friction, displacement thickness and momentum thickness is given for various values of β [=2m/(m + 1)], and the agreement is found to be fairly good for β>0 (accelerated flow) but not so good for β<0 (retarded flow).)

On three-dimensional boundary layer flow over surface irregularities

1980 ◽  
Vol 373 (1754) ◽  
pp. 311-329 ◽  
Keyword(s):  
Boundary Layer ◽  
Initial Conditions ◽  
Three Dimensional ◽  
Iterative Solution ◽  
Solution Technique ◽  
Parabolic Boundary ◽  
Boundary Layer Equations ◽  
Surface Irregularities ◽  
Dimensional Boundary ◽  
Layer Flow

The three-dimensional pipeflow boundary layer equations of Smith (1976) are shown to apply to certain external flow problems, and a numerical method for their solution is developed. The method is used to study flow over surface irregularities, and some three-dimensional separated flows are calculated. Upstream influence in the form of so-called ‘free interactions’ requires an iterative solution technique, in which the initial conditions for the parabolic boundary layer equations must be determined to satisfy a downstream condition

Effect of Adverse Pressure Gradients on Turbulent Boundary Layers in Axisymmetric Conduits

1957 ◽  
Vol 24 (2) ◽  
pp. 191-196
Author(s):  
J. M. Robertson ◽  
J. W. Holl
Keyword(s):  
Boundary Layer ◽  
Flow Parameter ◽  
Three Dimensional ◽  
Turbulent Boundary Layers ◽  
Pressure Gradients ◽  
Two Dimensional ◽  
Flow Conditions ◽  
Straight Pipe ◽  
Outer Flow ◽  
Dimensional Boundary

Abstract The development of the three-dimensional boundary layer in a diffuser with several discharge arrangements has been studied for air flow, in continuation of the work of Uram (1). The flow conditions in a diffuser when followed by a straight pipe, an additional length of the diffuser, or a jet, are compared. Extension of the method of analysis developed by Ross for two-dimensional layers is presented. In some cases the use of three-dimensionally defined parameters leads to different results. Ross’s (2) unique outer-flow parameter is found to be no longer satisfactory. Other outer parameters are presented as possible substitutes.

Development and assessment of computer methods for three-dimensional turbulent boundary layers

1999 ◽  
Vol 103 (1024) ◽  
pp. 287-297
Author(s):  
J. Wu ◽  
U. R. Müller
Keyword(s):  
Boundary Layer ◽  
Boundary Layers ◽  
Turbulent Flows ◽  
Three Dimensional ◽  
Theoretical Data ◽  
Field Method ◽  
Curvilinear Coordinates ◽  
Integral Boundary ◽  
Boundary Layer Equations ◽  
Computer Methods

Abstract This paper describes the development of a finite difference method that solves the boundary-layer equations for three-dimensional compressible turbulent flows. The most prominent achievements are the employment of a Newton technique for the simultaneous solution of all governing equations, an option to choose an algebraic or a k-ε eddy-viscosity turbulence model, and the flexible use of curvilinear coordinates. The method is validated by comparisons with a number of experimental and theoretical data sets of three-dimensional, compressible and incompressible, steady and unsteady boundary layers. In parallel, the performance of a three-dimensional compressible industrial integral boundary-layer technique is evaluated by comparisons with experimental test cases and with the results of the field method.

The interacting boundary-layer flow due to a vortex approaching a cylinder

1997 ◽  
Vol 346 ◽  
pp. 319-343 ◽  
Author(s):  
Z. XIAO ◽  
O. R. BURGGRAF ◽  
A. T. CONLISK
Keyword(s):  
Boundary Layer ◽  
Three Dimensional ◽  
Boundary Layer Separation ◽  
Two Dimensions ◽  
Unsteady Boundary Layer ◽  
Reynolds Number Flow ◽  
Boundary Layer Equations ◽  
Number Flow ◽  
Layer Flow ◽  
High Reynolds

In this paper the solution to the three-dimensional and unsteady interacting boundary-layer equations for a vortex approaching a cylinder is calculated. The flow is three-dimensional and unsteady. The purpose of this paper is to enhance the understanding of the structure in three-dimensional unsteady boundary-layer separation commonly observed in a high-Reynolds-number flow. The short length scales associated with the boundary-layer eruption process are resolved through an efficient and effective moving adaptive grid procedure. The results of this work suggest that like its two-dimensional counterpart, the three-dimensional unsteady interacting boundary layer also terminates in a singularity at a finite time. Furthermore, the numerical calculations confirm the theoretical analysis of the singular structure in two dimensions for the interacting boundary layer due to Smith (1988).

The boundary-layer flow due to a vortex approaching a cylinder

1994 ◽  
Vol 275 ◽  
pp. 33-57 ◽  
Author(s):  
H. Affes ◽  
Z. Xiao ◽  
A. T. Conlisk
Keyword(s):  
Boundary Layer ◽  
Secondary Flow ◽  
Three Dimensional ◽  
Adverse Pressure Gradient ◽  
Inviscid Flow ◽  
Main Stream ◽  
Boundary Layer Equations ◽  
Narrow Region ◽  
Secondary Flow Structure ◽  
Layer Flow

The three-dimensional unsteady boundary layer induced by a vortex filament moving outside a circular cylinder is considered. In the present paper, we focus attention on the situation where the inviscid flow is fully three-dimensional but is symmetric with respect to the top centreline of the cylinder. The motion of the vortex toward the cylinder leads to separation of the boundary layer; in the present work a large unsteady adverse pressure gradient develops as well. Results for the three-dimensional streamlines, the vorticity distribution, and the velocity component normal to the cylinder indicate the presence of a region of unsteady three-dimensional secondary flow structure of rather complex shape located deep within the boundary layer. Within this three-dimensional secondary flow the fluid is progressively squeezed into a narrow region under the main vortex and it is expected that a local three-dimensional jet will develop sending boundary-layer fluid out into the main stream. It is pointed out that such three-dimensional eruptive behaviour has been observed in experiments. The results indicate the development of a three-dimensional singularity in the boundary-layer equations.

Effects of Streamwise Vortices on Laminar Boundary-Layer Flow

1968 ◽  
Vol 35 (2) ◽  
pp. 424-426 ◽  
Author(s):  
T. K. Fannelop
Keyword(s):  
Boundary Layer ◽  
Boundary Layer Flow ◽  
Stokes Equations ◽  
Transverse Velocity ◽  
Three Dimensional ◽  
Perturbation Expansion ◽  
Navier Stokes ◽  
Boundary Layer Equations ◽  
Dimensional Boundary ◽  
Layer Flow

The effects of periodic transverse velocity fluctuations are investigated for boundary-layer flow over a flat plate. The method used is a perturbation expansion of the three-dimensional boundary-layer equations in terms of the small transverse velocity component. The equations are reduced to similarity form by means of suitable transformations. The second-order terms are expressed in terms of the first-order (Blasius) variables and are found to increase linearly with the streamwise coordinate. The present heat-transfer solution agrees with the more qualitative results of Persen. The derived velocity profiles are in exact agreement with the results of Crow’s more elaborate analysis based on the Navier-Stokes equations.

Sign in / Sign up

Export Citation Format

Share Document