Experimental Investigation on the Effects of Nano Fluid in ECM of High Carbon High Chromium Die Tool Steel

2016 ◽  
Vol 6 (8) ◽  
pp. 100
Author(s):  
V. Sathiyamoorthy ◽  
T. Sekar ◽  
M. Subramanian
Keyword(s):  
Experimental Investigation ◽  
Tool Steel ◽  
High Carbon ◽  
High Chromium ◽  
Nano Fluid

CANNON-MUSKEGON D-2

Alloy Digest ◽  
1973 ◽  
Vol 22 (7) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
Silicon Content ◽  
Cast Steel ◽  
Heat Treating ◽  
High Carbon ◽  
High Chromium ◽  
Temperature Performance ◽  
Aisi D2

Abstract CANNON-MUSKEGON D-2 is a high-carbon high-chromium air-hardening cast tool steel with excellent resistance to abrasion. It is moderately machinable with excellent non-deforming characteristics. A higher silicon content is permissible in this cast steel than in AISI D2 (wrought) tool steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: TS-259. Producer or source: Cannon-Muskegon Corporation.

BÖHLER K100

Alloy Digest ◽  
2020 ◽  
Vol 69 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Abrasive Wear ◽  
Tool Steel ◽  
Cold Work ◽  
Abrasive Wear Resistance ◽  
High Carbon ◽  
High Chromium ◽  
Cold Work Tool Steel

Abstract Böhler K100 is a high-carbon, high-chromium (12%), alloy cold-work tool steel that is suitable for medium run tooling in applications where a very good abrasive wear resistance is needed but where demands on chipping resistance are small. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming and machining. Filing Code: TS-788. Producer or source: voestalpine Böhler Edelstahl GmbH & Co.

scholarly journals Study of microstructure and thermal properties of as-cast high carbon and high chromium tool steel

10.30544/392 ◽  
2019 ◽  
Vol 25 (1) ◽  
pp. 1-10
Author(s):  
Dragan Miroslav Manasijevic ◽  
Žarko Radović ◽  
Nada Štrbac ◽  
Ljubiša Balanović ◽  
Uroš Stamenković ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Temperature Interval ◽  
Tool Steel ◽  
Room Temperature ◽  
Cold Work ◽  
Flash Method ◽  
Endothermic Effect ◽  
High Carbon ◽  
High Chromium

This work aims to investigate the microstructural and thermal properties of as-cast high carbon and high chromium cold work tool steel. The microstructure was investigated by using scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS) and X-ray diffraction (XRD) method. It was determined that at room temperature the microstructure of the investigated tool steel includes a lamellar network of M7C3 carbide precipitates along grain boundaries of ferrite grains in the base. Thermal diffusivity, specific heat capacity and thermal conductivity of the investigated steel alloy were determined in the temperature interval from 25 to 400 °C by using the laser-flash method. Thermal conductivity increases from 24.9 at 25 °C to 26.9 W/m·K at 400 °C. Phase transition temperatures in the temperature region from room temperature to 1250 °C were experimentally determined using differential scanning calorimetry (DSC). One endothermic effect in the temperature interval from 803 to 820 °C, corresponding to the ferrite/austenite phase transformation, was detected during sample heating. Experimental results were compared with the results of phase equilibria calculations obtained from the ThermoCalc software and TCFE6 database.

DOUBLE SIX SUPER

Alloy Digest ◽  
1968 ◽  
Vol 17 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
High Carbon ◽  
High Chromium ◽  
Thread Rolling ◽  
Steel Works

Abstract Double Six Super is a high-carbon high-chromium air hardening tool steel having excellent non-deforming characteristics. It is recommended for blanking and thread rolling dies, drawing and coining dies, gauges and mandrels. This datasheet provides information on composition, hardness, tensile properties, and compressive strength as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-205. Producer or source: Edgar Allen & Company Ltd, Imperial Steel Works.

LEHIGH-H

Alloy Digest ◽  
1954 ◽  
Vol 3 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Tool Steel ◽  
Abrasion Resistance ◽  
Heat Treating ◽  
High Carbon ◽  
Bethlehem Steel Corporation ◽  
High Chromium ◽  
Steel Corporation ◽  
Minimum Distortion

Abstract Lehigh H is a standard air-hardening type of high-carbon, high-chromium tool steel. It combines maximum abrasion-resistance and fair toughness with a minimum distortion in hardening. It corresponds to SAE Type IID-2 tool steel. This datasheet provides information on composition, hardness, and compressive strength as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-26. Producer or source: Bethlehem Steel Corporation.

HYCC

Alloy Digest ◽  
1963 ◽  
Vol 12 (4) ◽  
Keyword(s):  
Physical Properties ◽  
Tool Steel ◽  
Abrasion Resistance ◽  
Heat Treating ◽  
High Carbon ◽  
Steel Company ◽  
High Chromium ◽  
Crucible Steel

Abstract HYCC is a high-carbon high-chromium tool steel having high wear and abrasion resistance combined with non-deforming characteristics. It is particularly adaptable for blanking dies and punches. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-132. Producer or source: Crucible Steel Company of America.

LSS D7

Alloy Digest ◽  
2014 ◽  
Vol 63 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Tool Steel ◽  
Heat Treating ◽  
High Carbon ◽  
Steel Company ◽  
High Chromium ◽  
Specialty Steel

Abstract LSS D7 is a high-carbon, high-chromium, air-hardening stainless tool steel with great wear resistance. This datasheet provides information on composition and hardness as well as fracture toughness. It also includes information on wear resistance as well as heat treating and machining. Filing Code: TS-725. Producer or source: Latrobe Specialty Steel Company.

Sign in / Sign up

Export Citation Format

Share Document