scholarly journals In vitro evaluation of shear bond strength of resin cements to computer-aided design/computer-aided manufacturing (CAD/CAM) framework materials

2019 ◽  
Keyword(s):  
Bond Strength ◽  
Computer Aided Design ◽  
Shear Bond Strength ◽  
Resin Cements ◽  
In Vitro Evaluation ◽  
Framework Materials ◽  
Computer Aided ◽  
Cad Cam ◽  
Aided Design

scholarly journals Effect of Thermocycling on the Bond Strength of Self-Adhesive Resin Cements Used for Luting CAD/CAM Ceramics to Human Dentin

2022 ◽  
Vol 23 (2) ◽  
pp. 745
Author(s):  
Andrzej Malysa ◽  
Joanna Wezgowiec ◽  
Wojciech Grzebieluch ◽  
Dariusz P. Danel ◽  
Mieszko Wieckiewicz
Keyword(s):  
Bond Strength ◽  
Computer Aided Design ◽  
Shear Bond Strength ◽  
Failure Modes ◽  
Dental Materials ◽  
Resin Cements ◽  
Computer Aided ◽  
Human Dentin ◽  
Cad Cam ◽  
Aided Design

The aim of the study was to evaluate the influence of thermocycling on the shear bond strength of self-adhesive, self-etching resin cements luted to human dentin and computer-aided design/computer-aided manufacturing (CAD/CAM) ceramics. Three modern self-adhesive dental cements (Maxcem Elite, RelyX U200, Panavia SA) were used to lute three CAD/CAM ceramics (IPS Empress CAD, IPS e.max CAD, IPS e.max ZirCAD) onto the dentin. One conventional cement (Panavia V5) served as a control. After preparation, the samples were subjected to thermocycling as a method of artificial aging of dental materials applied to simulate long-term use in oral conditions. Shear bond strength was evaluated according to PN-EN ISO 29022:2013-10 and failure modes were observed under a light microscope. Statistical analysis was performed. The study demonstrated that a combination of ceramics and cements directly impacts the bond strength. The highest bond strength was observed in Panavia V5, lower in Panavia SA and Maxcem Elite and the lowest–in RelyX U200. Adhesive failure between human dentin and cements was the most common failure mode. Moreover, thermocycling highly decreased bond strength of self-adhesive, self-etching cements.

scholarly journals Single blinded in-vitro study comparing microleakage between CAD/CAM crowns milled out of feldspathic ceramic and resin nano ceramic, cemented with three resin cements

2019 ◽  
Vol 18 (4) ◽  
pp. 764-772
Author(s):  
Asa Yazdani Fard ◽  
Zuryati Ab Ghani ◽  
Zaihan Ariffin ◽  
Dasmawati Mohamad
Keyword(s):  
Computer Aided Design ◽  
Medical Science ◽  
In Vitro Study ◽  
Resin Cement ◽  
Blue Dye ◽  
Resin Cements ◽  
Etch And Rinse ◽  
Computer Aided ◽  
Cad Cam

Background: Studies on microleakage of Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM) crowns are abundant. However many of them are inconclusive, especially those using self adhesive cements. Aims: To compare the microleakage between CAD/CAM crowns milled out of feldspathic ceramic and resin nano ceramics, cemented with three resin cements. Materials and Methods: Crown preparation was made on 54 extracted human premolars. Impressions were captured optically using CEREC 3D machine intraoral camera, and crowns were milled from feldspathic ceramic (CEREC® Blocs PC, VITA) and resin nano ceramic (Lava™ Ultimate CAD/CAM Restorative, 3M ESPE) blocks. The crowns were then cemented with three cements (n = 9); RelyX™ U200 Self-Adhesive Resin Cement (3M ESPE); NX3 Nexus ® cement with two-step etch-and-rinse adhesive (Kerr Corporation) or three/multistep etch-and-rinse resin cement, Variolink® II/Syntac Classic (Ivoclar Vivadent). The specimens were kept in water for 24 hours, thermocycled, and then soaked in methylene blue dye for 24 hours, before being sectioned mesiodistally. Microleakage was assessed using a fivepoint scale using stereomicroscope. Statistical analysis of the data was carried out using ONEWay ANOVA. Results: CEREC® Blocs PC crowns showed significantly less microleakage (p< 0.001) compared to Lava™ Ultimate. RelyX™ U200 showed significantly lower microleakage (p< 0.001) compared to other cements. Combination of Lava™ Ultimate crown cemented with RelyX™ U200 showed the least microleakage (p< 0.001). Conclusions: The microleakage scores were affected by the types of crown and cements. Bangladesh Journal of Medical Science Vol.18(4) 2019 p.764-772

Effect of Different Adhesive Strategies and Time on Microtensile Bond Strength of a CAD/CAM Composite to Dentin

2019 ◽  
Vol 44 (3) ◽  
pp. 262-272
Author(s):  
EM Meda ◽  
RN Rached ◽  
SA Ignácio ◽  
IA Fornazari ◽  
EM Souza
Keyword(s):  
Bond Strength ◽  
Computer Aided Design ◽  
Optical Microscope ◽  
Single Bond ◽  
Microtensile Bond Strength ◽  
Resin Cements ◽  
Bonding Agents ◽  
Etch And Rinse ◽  
Computer Aided ◽  
Cad Cam

SUMMARY Purpose: The aim of this study was to evaluate the effect of adhesive strategy and time on the microtensile bond strength of a computer-aided design/computer-aided manufacturing (CAD/CAM) composite to dentin. Methods and Materials: Sixty CAD/CAM composite blocks were bonded to human dentin with simplified bonding agents using etch-and-rinse and self-etching approaches and amine-based and amine-free resin cements, with and without the application of a dual-cure activator (DCA; n=10): SBP-ARC (Adper Single Bond Plus + RelyX ARC), SBP-RXU (Adper Single Bond Plus + RelyX Ultimate), SBP-DCA-RXU (Adper Single Bond Plus + DCA + RelyX Ultimate), SBU-ARC (Scotchbond Universal + RelyX ARC), SBU-RXU (Scotchbond Universal + RelyX Ultimate), and SBU-DCA-ARC (Scotchbond Universal + DCA + RelyX ARC). Each specimen was light cured for 40 seconds under load and stored in distilled water at 37°C for seven days. Stick-shaped specimens (1.0 mm2) were obtained. Half of the specimens underwent microtensile bond strength testing, and the other half were subjected to the same tests after six months of storage. Failure mode was determined using an optical microscope (40×). The data were analyzed by a two-way analysis of variance followed by the Games-Howell test and Student t-test (preset alpha of 0.05). Results: After seven days, SBU-RXU presented the highest mean bond strength, statistically different from only SBU-ARC (p&lt;0.05). Most of the groups exhibited a statistically significant reduction in bond strength after 6 months (p&lt;0.05), except SBP-RXU and SBU-ARC (p&gt;0.05). Conclusion: The adhesive strategy, with different associations between adhesive systems and resin cements, as well as the use of a DCA, affected the bond strength of both amine-free and amine-based resin cements to a CAD/CAM composite.

scholarly journals Efeito da fumaça de cigarro e escovação simulada na cêramica vítrea de dissilicato de lítio CAD/CAM

2021 ◽  
Vol 13 (4) ◽  
pp. e7296
Author(s):  
Magna Andréa Rabêlo Diógenes ◽  
Francisca Tauliane Lemos de Castro ◽  
Samara Kelly da Silva Cavalcante ◽  
Ana Carolina Matias Dinelly Pinto ◽  
Pedro Henrique Chaves Isaias ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
Lithium Disilicate ◽  
Computer Aided Manufacturing ◽  
Computer Aided ◽  
Cad Cam ◽  
Aided Design

Objetivo: Revisar acerca do efeito da fumaça do cigarro, associada ou não à escovação, na rugosidade superficial e na microdureza de uma cerâmica vítrea de dissilicato de lítio “Computer-Aided Design/Computer-Aided Manufacturing” (CAD/CAM). Métodos: Pesquisaram-se os descritores cadastrados no MeSH “lithium disilicate”, “smoking”, “CAD CAM”, “brushing”, “rough”, “hardness”, combinados entre si pelo operador booleano “AND”, na base de dados PubMed nos últimos 5 anos. Resultados: De acordo com a pesquisa, foram encontrados 625 artigos e selecionados 12 estudos in vitro. 5 estudos concluíram que as restaurações cerâmicas CAD/CAM apresentaram estabilidade de cor e de rugosidade da superfície, após escovação simulada e termociclagem.  4 estudos observaram que a escovação simulada e algumas bebidas aumentaram significativamente a rugosidade superficial da cerâmica de dissilicato de lítio. 3 estudos inferiram que a rugosidade superficial e a microdureza podem ser influenciadas pelos tratamentos de superfícies. Considerações finais: As cerâmicas de dissilicato de lítio CAD/CAM possuem propriedades satisfatórias em relação a sua resistência e estética, após exposição à fumaça do cigarro, associada ou não com a escovação.

scholarly journals Bond integrity and microleakage of dentin-bonded crowns cemented with bioactive cement in comparison to resin cements: in vitro study

2020 ◽  
Vol 18 ◽  
pp. 228080002090576 ◽  
Author(s):  
Fahim Vohra ◽  
Manea Altwaim ◽  
Abdulaziz S Alshuwaier ◽  
Abdullah Alomayri ◽  
Modhi Al Deeb ◽  
...  
Keyword(s):  
Bond Strength ◽  
Computer Aided Design ◽  
Testing Machine ◽  
Glass Ionomer Cement ◽  
Resin Cement ◽  
Micro Ct ◽  
Resin Cements ◽  
Luting Agent ◽  
Computer Aided

Objective: The aim was to compare restorative marginal integrity of ceramic crowns luted with bioactive and resin cements using micro-computed tomography (micro-CT) microleakage evaluations and bond strength assessment. Methods: Thirty molar teeth were prepared by sectioning and polishing for dentin exposure for resin cement build-ups. Teeth were randomly divided among three groups of cements: (1) bioactive (ACTIVA); (2) glass ionomer cement (GIC; Ketac Cem); and (3) resin luting agent (Nexus 3). Bonding regime and build-ups (4 mm × 2 mm) were performed using the recommended protocol. For microleakage assessment, 30 premolar teeth were prepared for dentin-bonded crowns using lithium disilicate ceramic and the computer-aided design and computer-aided manufacturing technique. Crowns were cemented with standard load, cement amount, and duration using three cements (Group A: bioactive; Group B: GIC; Group C: resin) and photopolymerized. Cemented crowns were evaluated for volumetric infiltration using micro-CT (Skyscan, Bruker 1173- at 86 kV, 93 µA, 620 ms) after immersion in 50% solution of silver nitrate (AgNO3) (24 hours). Shear bond strength (SBS) was assessed by fracture of cement build-ups at a cross-head speed of 0.5 mm/min in a universal testing machine. Results: Mean SBS among bioactive (21.54 ± 3.834 MPa) specimens was significantly higher than that for GIC (14.08 ± 3.25 MPa) specimens ( p < 0.01), but they were comparable to resin samples ( p > 0.05) (24.73 ± 4.32 MPa). Microleakage was significantly lower in crowns luted with bioactive (0.381 ± 0.134) cement compared to GIC (1.057 ± 0.399 mm3) ( p < 0.01) and resin (0.734 ± 0.166 mm3) ( p = 0.014) cemented crowns. The type of luting agent had a significant influence on the microleakage of crowns and bond strength to dentin ( p < 0.05). Conclusion: Bioactive cement exhibited less microleakage and comparable SBS to resin luting agents in in vitro conditions.

Effect of Different Computer-aided Design/Computer-aided Manufacturing (CAD/CAM) Materials and Thicknesses on the Fracture Resistance of Occlusal Veneers

2018 ◽  
Vol 43 (5) ◽  
pp. 539-548 ◽  
Author(s):  
JP Andrade ◽  
D Stona ◽  
HR Bittencourt ◽  
GA Borges ◽  
LH Burnett ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
Fracture Resistance ◽  
Testing Machine ◽  
Control Group ◽  
Computer Aided Manufacturing ◽  
Universal Testing ◽  
Computer Aided ◽  
Cad Cam ◽  
Aided Design

SUMMARY The aim was to evaluate, in vitro, the influence of different computer-aided design/computer-aided manufacturing (CAD/CAM) materials (IPS e.max CAD, Vita Enamic, and Lava Ultimate) and thicknesses (0.6 mm and 1.5 mm) on the fracture resistance of occlusal veneers. Sixty human third molars were prepared to simulate advanced erosion of the occlusal surface, and the teeth were randomly divided into six experimental groups (n=10) according to the material and thickness used to build the veneers. Ten sound teeth formed the control group. The veneers were adhesively luted and submitted to mechanical cyclic loading (1 million cycles at 200-N load). The fracture resistance test was performed in a universal testing machine. The failures were classified as “reparable” and “irreparable.” According to two-way analysis of variance and the Tukey test, the interaction (material × thickness) was significant (p=0.013). The highest fracture resistance was obtained for IPS e.max CAD at a 1.5-mm thickness (4995 N) and was significantly higher compared to the other experimental groups (p&lt;0.05). The lowest fracture resistance was obtained for Vita Enamic at 0.6 mm (2973 N), although this resistance was not significantly different from those for IPS e.max CAD at 0.6 mm (3067 N), Lava Ultimate at 0.6 mm (3384 N), Vita Enamic at 1.5 mm (3540 N), and Lava Ultimate at 1.5 mm (3584 N) (p&gt;0.05). The experimental groups did not differ significantly from the sound teeth (3991 N) (p&gt;0.05). The failures were predominantly repairable. The occlusal veneers of IPS e.max CAD, Vita Enamic, and Lava Ultimate, with thicknesses of 0.6 mm and 1.5 mm, obtained fracture resistances similar to those associated with sound teeth.

Sign in / Sign up

Export Citation Format

Share Document