Hybrid Aluminum Matrix Composites (HAMCs) Using Powder Metallurgy Method

2018 ◽  
Author(s):  
A. Rahman ◽  
N. Zakir ◽  
I. Abu-Mahfouz
Keyword(s):  
Powder Metallurgy ◽  
Aluminum Matrix ◽  
Aluminum Matrix Composites ◽  
Powder Metallurgy Method ◽  
Matrix Composites

Mechanical properties of Al-Cu/B4C and Al-Mg/B4C metal matrix composites

2021 ◽  
Vol 63 (4) ◽  
pp. 350-355
Author(s):  
Mehmet Ayvaz ◽  
Hakan Cetinel
Keyword(s):  
Mechanical Properties ◽  
Powder Metallurgy ◽  
Liquid Phase ◽  
Oxide Layer ◽  
Solid Phase ◽  
Aluminum Matrix ◽  
Liquid Phase Sintering ◽  
Aluminum Matrix Composites ◽  
Powder Metallurgy Method ◽  
Matrix Composites

Abstract To be able to successfully produce ceramic-reinforced aluminum matrix composites by using the powder metallurgy method, the wetting of ceramic reinforcements should be increased. In addition, the negative effects of the oxide layer of the aluminum matrix on sinterability should be minimized. In order to break the oxide layer, the deoxidation property of Mg can be used. Furthermore, by creating a liquid phase, both wettability and sinterability can be improved. In this study, the effects of Mg and Cu alloy elements and sintering phase on the wettability, sinterability, and mechanical properties of Al/B4C composites were investigated. For this purpose, various amounts (5, 10, 20, and 30 wt.-%) of B4C reinforced Al5Cu and Al5Mg matrix composites were produced by the powder metallurgy method. After pressing under 400 MPa pressure, composite samples were sintered for 4 hours. The sintering was carried out in two different groups as solid phase sintering at 560 °C and liquid phase sintering at 610 °C. Despite the deoxidation effect of Mg in Al5Mg matrix composites, higher mechanical properties were determined in Al5Cu composites which were sintered in liquid phase because wettability increased. The highest mechanical properties were obtained in the 20 wt.-% B4C reinforced Al5Cu sample sintered in liquid phase.

Review and Outlook of Aluminum Matrix Composites

2020 ◽  
Vol 984 ◽  
pp. 119-124 ◽  
Author(s):  
Wan Bo Zhu ◽  
Zheng Gui Zhang ◽  
Hao Nan Chen ◽  
Tie Xiao
Keyword(s):  
Powder Metallurgy ◽  
Future Development ◽  
Aluminum Matrix ◽  
Performance Characteristics ◽  
Aluminum Matrix Composites ◽  
Powder Metallurgy Method ◽  
Matrix Composites ◽  
Preparation Methods ◽  
The Past ◽  
The Future

In the past 20 years, the development of aluminum matrix composites (AMCs) has made a qualitative leap. This article comprehensively introduces the performance characteristics and the preparation methods of aluminum matrix composites. The powder metallurgy method (P/M) is elaborated in detail. And the applications of aluminum matrix composites in aerospace, automobile and other fields are described. Finally, the future development of aluminum matrix composites is prospected.

Analysis of Coefficient of Thermal Expansion and Thermal Conductivity of Bi-Modal SiC/A356 Composites Fabricated via Powder Metallurgy Route

2017 ◽  
Author(s):  
Preetkanwal Singh Bains ◽  
H. S. Payal ◽  
Sarabjeet Singh Sidhu
Keyword(s):  
Thermal Conductivity ◽  
Thermal Expansion ◽  
Powder Metallurgy ◽  
Volume Fraction ◽  
Coefficient Of Thermal Expansion ◽  
Aluminum Matrix ◽  
Aluminum Matrix Composites ◽  
Powder Metallurgy Method ◽  
Matrix Composites ◽  
Sic Particulates

The present study investigates the thermal conductivity and coefficient of thermal expansion of bimodal SiCp reinforced Aluminum matrix composites formed via powder metallurgy method. The after-effects of proportion of particulate reinforcement as size distribution and sintering parameters on the thermal properties have been explored. The Box-Behnken design for response surface methodology was adopted to recognize the significance of chosen variables on the thermal conductivity and coefficient of thermal expansion of the composite. It is witnessed that the thermal conductivity and coefficient of thermal expansion enhanced due to increase in fine SiC particulates volume fraction. It has been exhibited that the fine SiC particulates (37μm) doped Al-matrix occupied interstitial positions and developed continuous SiC-matrix network. SEMs were conducted to evaluate the microstructure architecture for MMCs.

scholarly journals Al-AlN nano-structural aluminum-matrix composite manufacturing by powder metallurgy method

2019 ◽  
Vol 2019 (10) ◽  
pp. 3-11
Author(s):  
Александр Амосов ◽  
Aleksandr Amosov ◽  
Антонина Кузина ◽  
Antonina Kuzina ◽  
Юлия Титова ◽  
...  
Keyword(s):  
Powder Metallurgy ◽  
Solid Phase ◽  
Aluminum Matrix ◽  
Aluminum Matrix Composite ◽  
Nano Particles ◽  
Phase Method ◽  
Aluminum Matrix Composites ◽  
Powder Metallurgy Method ◽  
Matrix Composites ◽  
Solid Phase Method

According to the review of liquid-phase and solid-phase methods of manufacturing aluminum-matrix composites reinforced with ceramic nano-particles one can obtain cast composites having a reinforcing phase not more than 5% by weight. There is shown a possibility to manufacture Al-AlN nano-composite with considerably higher content (up to 30% by weight) AlN aluminum nitride nano-particles with the aid of a solid-phase method of powder metallurgy.

scholarly journals Aluminum/Carbon Composites Materials Fabricated by the Powder Metallurgy Process

Materials ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4030 ◽  
Author(s):  
Amélie Veillère ◽  
Hiroki Kurita ◽  
Akira Kawasaki ◽  
Yongfeng Lu ◽  
Jean-Marc Heintz ◽  
...  
Keyword(s):  
Powder Metallurgy ◽  
Coefficient Of Thermal Expansion ◽  
Metallic Matrix ◽  
Aluminum Matrix ◽  
Analytical Models ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
Alumina Layer ◽  
Powder Metallurgy Process ◽  
Metallurgy Process

Aluminum matrix composites reinforced with carbon fibers or diamond particles have been fabricated by a powder metallurgy process and characterized for thermal management applications. Al/C composite is a nonreactive system (absence of chemical reaction between the metallic matrix and the ceramic reinforcement) due to the presence of an alumina layer on the surface of the aluminum powder particles. In order to achieve fully dense materials and to enhance the thermo-mechanical properties of the Al/C composite materials, a semi-liquid method has been carried out with the addition of a small amount of Al-Si alloys in the Al matrix. Thermal conductivity and coefficient of thermal expansion were enhanced as compared with Al/C composites without Al-Si alloys and the experimental values were close to the ones predicted by analytical models.

Sign in / Sign up

Export Citation Format

Share Document