Selection of optimum parameters for the hydraulic drive of a fan of a vehicle’s engine cooling system

2013 ◽  
Vol 13 (07) ◽  
Author(s):  
Kirill Truhanov ◽  
Dmitri Popov
Keyword(s):  
Cooling System ◽  
Hydraulic Drive ◽  
Engine Cooling ◽  
Optimum Parameters ◽  
Selection Of

Selection of the optimal hydraulic drive for the press

2021 ◽  
pp. 50-60
Author(s):  
A.A. Antsifirov ◽  
V.A. Krivoshein
Keyword(s):  
Technological Process ◽  
Electric Motor ◽  
Software Package ◽  
Hydraulic Drive ◽  
Hydraulic Press ◽  
Topological Model ◽  
Electric Motors ◽  
Engine Operation ◽  
The Press ◽  
Selection Of

The research presented in the article is devoted to the selection of the electric motor of the hydraulic press drive with a nominal force of 5MN. The article presents the main characteristics and the description of the press operation using the means of mechanization of the technological process of pressure treatment. Using the Deform-3D software package, the process of stamping the crosspiece of the ZIL-130 cardan shaft was simulated. Based on the presented hydraulic scheme of the press, its topological model was formed in the PA-9 software package. The deformation force obtained in the course of modeling the technological process of stamping was used in the topological model of the press. Using a tabular cyclogram, the sequence of actuation of the end switches and hydraulic distributors during the stamping process is shown. In the article, two variants of engine operation were analyzed. Based on the results of the conducted research, it is necessary to focus on the second version of the 55 kW engine, the operation of which will provide the required characteristics of the hydraulic drive of the press, which in turn will allow for technological stamping operations. The simulation tools allow providing estimated information when selecting the necessary tools to ensure the optimal characteristics of hydraulic press drives. The article considered the variation of electric motors that differ from each other in nominal characteristics, with constant characteristics of the pump. For more accurate estimates of energy savings during the operation of the hydraulic drive, it is necessary to vary the characteristics of the pump in the simulation, and the best option is to form an experiment planning matrix when combining the characteristics of the electric motor and the hydraulic pump. This approach ultimately allows forming a function for which one can select a hydraulic drive from existing brands of electric motors and hydraulic pumps for presses of the corresponding range of nominal force.

scholarly journals Design and Modification of Radiator in I.C. Engine Cooling System for Maximizing Efficiency and Life

2016 ◽  
Vol 9 (2) ◽  
Author(s):  
R. Paul Linga Prakash ◽  
M. Selvam ◽  
A. Alagu Sundara Pandian ◽  
S. Palani ◽  
K. A. Harish
Keyword(s):  
Cooling System ◽  
Engine Cooling

A Rational Approach to the Aerodynamics of Engine Cooling System Design

1968 ◽  
Vol 183 (1) ◽  
pp. 69-84 ◽  
Author(s):  
M. G. Paish
Keyword(s):  
Motor Vehicle ◽  
Cooling System ◽  
Original System ◽  
Production Costs ◽  
Rational Approach ◽  
Test Vehicle ◽  
Secondary Importance ◽  
Cooling Systems ◽  
Engine Cooling ◽  
Cooling Fan

The aerodynamic inefficiencies of motor vehicle cooling systems are generally of secondary importance to their production costs. However, the advent of the inexpensive moulded fan has meant that an improvement in cooling system aerodynamics can be more readily achieved which could reduce costs and radiator sizes, with the additional benefits of predictable performance and improved economy. In the investigation described, the design objective was to meet the top gear cooling targets entirely with ram-induced airflow, and to design the engine driven fan so that it consumed negligible power for top gear conditions, whilst being capable of meeting the cooling targets in the intermediate gear ratios. The work divided itself into the following three sections: (1) The prediction and achievement of the maximum ram-induced airflows. (2) Designing the cooling fan to be effectively free-wheeling and, therefore, consuming negligible power during top gear motoring, and to measure the performance of the resulting fan throughout the ram and fan assisted airflow regimes. (3) Designing and predicting the performance of a cooling system which was subsequently built and installed in a test vehicle in order to check its performance and making an overall comparison with regard to the original system. The paper shows that the design objectives were closely achieved. The 1·7 litre test vehicle was cooled satisfactorily with a one foot square radiator with the expenditure of only 0·9 hp in the cooling system when travelling at 70 mile/h.

Sign in / Sign up

Export Citation Format

Share Document