scholarly journals Development of Fixed Time Kinetic Spectrophotometric Method for Selective Determination of Metformin in Pharmaceutical Formulations

2015 ◽  
Keyword(s):  
Spectrophotometric Method ◽  
Pharmaceutical Formulations ◽  
Fixed Time ◽  
Selective Determination ◽  
Kinetic Spectrophotometric

scholarly journals New Kinetic Spectrophotometric Method for Determination of Folic Acid in Pharmaceutical Formulations

2015 ◽  
Vol 50 ◽  
pp. 169-178
Author(s):  
Mouhammed Khateeb ◽  
Basheer Elias ◽  
Fatema Al Rahal
Keyword(s):  
Folic Acid ◽  
Spectrophotometric Method ◽  
Pharmaceutical Formulations ◽  
Fixed Time ◽  
Rate Data ◽  
Sulfuric Acid Medium ◽  
Significant Difference ◽  
Kinetic Spectrophotometric ◽  
Comparison Of The Results

A simple and sensitive kinetic spectrophotometric method has been developed for the determination of folic acid (FA) in bulk and pharmaceutical Formulations. The method is based on the oxidation of FA by Fe (III) in sulfuric acid medium. Fe (III) subsequently reduces to Fe (II) which is coupled with potassium ferricyanide to form Prussian blue. The reaction is followed spectrophotometrically by measuring the increase in absorbance at λmax 725 nm. The rate data and fixed time methods were adopted for constructing the calibration curves. The linearity range was found to be 1–20 μg mL-1 for each method. The correlation coefficient was 0.9978 and 0.9993, and LOD was found to be 0.91 and 0.09 μg mL-1 for rate data and fixed time methods, respectively. The proposed method has been successfully applied to the determination of FA in formulations with no interference from the excipients. Statical comparison of the results shows that there is no significant difference between the proposed and pharmacopoeial methods

scholarly journals New Kinetic Spectrophotometric Method for Determination of Fexofenadine Hydrochloride in Pharmaceutical Formulations

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Safwan Ashour ◽  
Mouhammed Khateeb
Keyword(s):  
Spectrophotometric Method ◽  
Initial Rate ◽  
Pharmaceutical Preparations ◽  
Pharmaceutical Formulations ◽  
Fixed Time ◽  
Official Method ◽  
Reaction Conditions ◽  
Accuracy And Precision ◽  
Kinetic Spectrophotometric

A simple and sensitive kinetic spectrophotometric method was developed for the determination of fexofenadine hydrochloride in bulk and pharmaceutical preparations. The method is based on a kinetic investigation of the oxidation reaction of fexofenadine using alkaline potassium permanganate as an oxidizing agent at room temperature. The reaction is followed spectrophotometrically by measuring the increase of absorbance owing to the formation of manganate ion at 610 nm. The initial rate and fixed time (at 15 min) methods are utilized for construction of calibration graphs. All the reaction conditions for the proposed method have been studied. The linearity range was found to be 2.5–50.0 μg mL−1 with detection limit of 0.055 μg mL−1 for both initial rate and fixed time methods. The proposed method was applied successfully for the determination of fexofenadine in pharmaceutical formulations; the percentage recoveries were 99.98–101.96%. The results obtained were compared statistically with those obtained by the official method and showed no significant differences regarding accuracy and precision.

scholarly journals Trace determination of isoniazid at micro level using kinetic spectrophotometric method

2021 ◽  
pp. 17-17
Author(s):  
Rupal Yadav ◽  
Indresh Kumar ◽  
Radhey Naik
Keyword(s):  
Spectrophotometric Method ◽  
Pharmaceutical Formulations ◽  
Fixed Time ◽  
Official Method ◽  
Trace Determination ◽  
Reaction Conditions ◽  
Optimum Reaction ◽  
Kinetic Spectrophotometric ◽  
Fixed Times

An effective and fairly inexpensive spectrophotometric method for trace determination of isoniazid INH in pure form as well as in pharmaceutical formulations has been developed through ligand substitution reaction between INH and aquapentacyanoruthenate (II) ion ([Ru(CN)5OH2]3-) in aqueous medium at ?max = 502 nm. The fixed time procedure has been employed under optimum reaction conditions. The calibration equations, relating absorbance measured at 502 nm at fixed times (tn = 2, 5 and 7 min) and cINH in linear range (1.37 - 27.43) ?g mL-1, were used for trace determination of INH has been reported in the present investigation which are in agreement with official and reported methods. The percentage recovery has been calculated and found to be within the range of (99 - 101 %) in the analysis of different pharmaceutical samples. The results reveal that the use of common recipients as additives do not produce any type of interference in proposed method. The validity of the proposed method was also checked by statistical analysis which agreed with the results obtained using official method. The present method is very simple, reproducible, sensitive and it can be adopted for trace determination of INH in different samples without using extracting agent.

scholarly journals The Development of a New Kinetic Spectrophotometric Method for the Determination of Vanadium(V) Based on its Catalytic Effect on the Oxidation of Malachite Green Oxalate by Bromate in Acidic and Micellar Medium

2010 ◽  
Vol 7 (4) ◽  
pp. 1612-1620 ◽  
Author(s):  
M. Keyvanfard ◽  
N. Abedi
Keyword(s):  
Malachite Green ◽  
Spectrophotometric Method ◽  
Catalytic Effect ◽  
Limit Of Detection ◽  
Fixed Time ◽  
Micellar Medium ◽  
Relative Standard ◽  
Kinetic Spectrophotometric ◽  
Malachite Green Oxalate

A new, simple, sensitive and selective kinetic spectrophotometric method was developed for the determination of ultra trace amounts of vanadium(V). The method is based on the catalytic effect of vanadium(V) on the oxidation of malachite green oxalate (MG) by bromate in acidic and micellar medium. The reaction was monitored spectrophotometrically by measuring the decrease in the absorbance of malachite green oxalate (MG) at 625 nm with a fixed-time method. The decrease in the absorbance of MG is proportional to the concentration of vanadium(V) in the range of 1-100 ng/mL with a fixed time of 0.5-2 min from the initiation of the reaction. The limit of detection is 0.71 ng/mL of vanadium(V). The relative standard deviation for the determination of 5, 30, 50 ng/mL of vanadium(V) was2.5% 2.6%, 2.4% and respectively. The method was applied to the determination of vanadium(V) in water samples.

Kinetic Spectrophotometric Determination of Ruthenium by its Catalytic Effect on the Reduction of Spadns with Sodium Hypophosphite in Micellar Media

2012 ◽  
Vol 204-208 ◽  
pp. 4067-4070 ◽  
Author(s):  
Zhi Rong Zhou ◽  
Li Zhen Zhang
Keyword(s):  
Standard Deviation ◽  
Spectrophotometric Method ◽  
Catalytic Effect ◽  
Limit Of Detection ◽  
Fixed Time ◽  
Sodium Hypophosphite ◽  
Micellar Media ◽  
Relative Standard ◽  
Kinetic Spectrophotometric

A simple kinetic spectrophotometric method was developed for the determination of trace amounts of Ru (III). The method is based on the reduction of spadns by sodium hypophosphite (NaH2PO2) in micellar media. The reaction was monitored spectrophotometrically by measuring the decrease in the absorbance of spadns at 515 nm with a fixed-time method. The decrease in the absorbance of spadns is proportional to the concentration of Ru (III) in the range 0.40–10.0 μg/L with a fixed time of 2.5–7.0 min from the initiation of the reaction. The limit of detection is 0.12 μg/L Ru (III). The relative standard deviation for the determination of 0.10 and 0.20 μg/25mL Ru (III) was 2.3 % and 2.0 %, respectively. The method was applied to the determination of Ru (III) in some ores and metallurgy products.

Kinetic Spectrophotometric Method for the Determination of Selenium (IV) by its Catalytic Effect on the Reduction of Arsenazo III with Sodium Hypophosphite in Micellar Media

2012 ◽  
Vol 554-556 ◽  
pp. 926-933
Author(s):  
Zhi Rong Zhou ◽  
Li Zhen Zhang
Keyword(s):  
Standard Deviation ◽  
Relative Standard Deviation ◽  
Spectrophotometric Method ◽  
Catalytic Effect ◽  
Fixed Time ◽  
Sodium Hypophosphite ◽  
Micellar Media ◽  
Relative Standard ◽  
Kinetic Spectrophotometric

A simple and sensitive kinetic spectrophotometric method for the determination of trace selenium (IV) is described, based on its catalytic effect on the reduction arsenazo III (AsA III) with sodium hypophosphite (NaH2PO2) in a solution of 0.02 mol/L sulfuric acid and in the presence of cationic micellar media. The reaction rate is monitored spectrophotometrically by measuring the decrease in absorbance of AsA III at 550 nm with a fixed-time method. The decrease in the absorbance of AsA III is proportional to the concentration of Se(IV) in the range 0.16–1.0 µg/L after a fixed time of 4–10 min from the initiation of the reaction. The limit of detection is 0.049 µg/L Se(IV). The influence of th e factors such as acidity, concentration of reactants, type and concentration of surfactants, reactive time, temperature and co-existing ions on the reaction is discussed. The optimum reaction conditions of reaction are established and some kinetic parameters are determined; the apparent activation energy of catalytic reaction is 59.51 kJ/mol. The relative standard deviation for eleven replicate determination of 0.02, and 0.01µg/25mL Se(IV) was 2.0 % and 2.4 %, respectively. Combined with sulphydryl dextrane gel (SDG) separation and enriching, the method has been successfully applied to the determination of Se (IV) in foodstuff and human hair samples with the relative standard deviation of 2.1 %–5.8 % and the recovery of 97.0 %–103.3 %, the results are in good agreement with those provided by ICP-AES method.

scholarly journals A New Kinetic Spectrophotometric Method for the Quantitation of Amorolfine

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
César Soto ◽  
Cristian Poza ◽  
David Contreras ◽  
Jorge Yáñez ◽  
Fallon Nacaratte ◽  
...  
Keyword(s):  
Spectrophotometric Method ◽  
Tap Water ◽  
Fixed Time ◽  
Fungal Cell ◽  
Inhibition Of Growth ◽  
Fungicide Activity ◽  
Dual Inhibition ◽  
Assay Precision ◽  
Kinetic Spectrophotometric

Amorolfine (AOF) is a compound with fungicide activity based on the dual inhibition of growth of the fungal cell membrane, the biosynthesis and accumulation of sterols, and the reduction of ergosterol. In this work a sensitive kinetic and spectrophotometric method for the AOF quantitation based on the AOF oxidation by means of KMnO4at 30 min (fixed time), pH alkaline, and ionic strength controlled was developed. Measurements of changes in absorbance at 610 nm were used as criterion of the oxidation progress. In order to maximize the sensitivity, different experimental reaction parameters were carefully studied via factorial screening and optimized by multivariate method. The linearity, intraday, and interday assay precision and accuracy were determined. The absorbance-concentration plot corresponding to tap water spiked samples was rectilinear, over the range of 7.56 × 10−6–3.22 × 10−5 mol L−1, with detection and quantitation limits of 2.49 × 10−6 mol L−1and 7.56 × 10−6 mol L−1, respectively. The proposed method was successfully validated for the application of the determination of the drug in the spiked tap water samples and the percentage recoveries were 94.0–105.0%. The method is simple and does not require expensive instruments or complicated extraction steps of the reaction product.

scholarly journals Kinetic- spectrophotometric Method for the Determination of Naringenin in Pure and Supplements Formulations

2019 ◽  
Vol 16 (3) ◽  
pp. 0595
Author(s):  
ALmashhadani Et al.
Keyword(s):  
Prussian Blue ◽  
Correlation Coefficient ◽  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Fixed Time ◽  
Calibration Graph ◽  
Maximum Absorbance ◽  
Kinetic Spectrophotometric

          Simple, cheap, sensitive, and accurate kinetic- spectrophotometric method has been developed for the determination of naringenin in pure and supplements formulations. The method is based on the formation of Prussian blue. The product dye exhibits a maximum absorbance at 707 nm. The calibration graph of naringenin was linear over the range 0.3 to 10 µg ml-1 for the fixed time method (at 15 min) with a correlation coefficient (r) and percentage linearity (r2%) were of 0.9995 and 99.90 %, respectively, while the limit of detection LOD was 0.041 µg ml-1. The method was successfully applied for the determination of naringenin in supplements with satisfactory results.

Sign in / Sign up

Export Citation Format

Share Document