scholarly journals A Multi-Band U-Strip and SRR Loaded Slot Antenna with Circular Polarization Characteristics

2020 ◽  
Vol 9 (1) ◽  
pp. 41-48
Author(s):  
P. M. Paul ◽  
K. Kandasamy ◽  
M. S. Sharawi
Keyword(s):  
Circular Polarization ◽  
Ring Resonator ◽  
Axial Ratio ◽  
Split Ring Resonator ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Split Ring ◽  
Circularly Polarized ◽  
Polarization Characteristics ◽  
Good Agreement

A compact multiband circularly polarized slot antenna is proposed here. An F-shaped microstrip feedline is used to excite the square slot antenna loaded with a U-shaped strip and a split ring resonator (SRR) to generate three circularly polarized bands at 1.5 GHz, 2.75 GHz and 3.16 GHz. A meandered slot is used in the feedline and the U-strip to improve the axial ratio bandwidth (ARBW). The meandered feedline excites the slot to produce resonance at 2.5 GHz. This resonance along with that of the F-shaped feed, loaded SRR and U-strip combine to give rise to three circularly polarized bands which can be tuned depending on the feed, SRR and U-strip dimensions. The orientation of the F-shaped feed decides the sense of polarization of the three circularly polarized bands of the proposed antenna. The proposed antenna is fabricated on a substrate of FR4 material with dimensions 50 x 50 x 1.56 mm3. The antenna is prototyped and measured in terms of impedance bandwidth, ARBW, gain and efficiency. The simulated and measured results show reasonably good agreement.

A Compact Broadband Circularly Polarized Slot Antenna for Universal UHF RFID Reader and GPS

2021 ◽  
Vol 36 (5) ◽  
pp. 589-595
Author(s):  
Canjie Chen ◽  
Quanyuan Feng
Keyword(s):  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Uhf Rfid ◽  
Circularly Polarized ◽  
Rectangular Slot ◽  
Polarization Characteristics ◽  
Ground Plate

A novel compact printed broadband circularly polarized slot antenna is proposed in this paper. The antenna consists of an inverted L-shaped coplanar waveguide feed structure and a square ground plate loaded with three rectangular slots. The antenna achieves good impedance matching and circular polarization characteristics by adjusting the size of the L-shaped band and the rectangular slot. The simulation results show that the antenna has a 10-dB impedance bandwidth of 1360 MHz (690-2050 MHz) and a 3 dB axial ratio (AR) bandwidth of 490 MHz (770-1260 MHz). Additionally, the maximum gain reached 4.02 dBi. The antenna proposed in this paper can be applied to UHF RFID and GPS frequency bands.

Wideband Inverted-L Microstrip-via-Fed Circularly Polarized Antenna with Asymmetrical Ground for WLAN/Wimax Applications

Frequenz ◽  
2018 ◽  
Vol 72 (7-8) ◽  
pp. 333-341 ◽  
Author(s):  
Qiang Chen ◽  
Hou Zhang ◽  
Lu-chun Yang ◽  
Bin-bin Li ◽  
Xue-liang Min
Keyword(s):  
Circular Polarization ◽  
Parametric Study ◽  
Ground Plane ◽  
Axial Ratio ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Large Bandwidth ◽  
Circularly Polarized Radiation ◽  
Polarized Radiation

Abstract A design with wideband and circularly polarized radiation antenna from an open-slot antenna has been demonstrated in this paper. The proposed antenna, which consists of an open slot and an inverted-L strip feeding, provides a large bandwidth, which completely cover the Wimax (3.3–3.8 GHz) and WLAN (2.4–2.48 GHz) bands. The open slot is formed by an modified ground plane with a slit cut and monofilar spiral stubs employed, which fed by an asymmetrical inverted-L strip feedline using a via. As demonstrated, the CP operation was significantly improved by loading monofilar spiral stubs connected to the asymmetric feedline by means of a via. A parametric study of the key parameters is made and the mechanism for circular polarization is described. After optimization, the impedance bandwidth is approximately 3.78 GHz (2.12 to 5.9 GHz) and the 3 dB axial ratio bandwidth is approximately 2.75 GHz (2.2 to 4.95 GHz), which represent fractional bandwidths of approximately 94.3 % and 76.9 %, respectively.

scholarly journals A Miniaturized and Circularly Polarized L-Shaped Slot Antenna for Ultra-wideband Applications

2019 ◽  
Vol 8 (4) ◽  
pp. 2133-2139
Keyword(s):  
Circular Polarization ◽  
Radiation Pattern ◽  
Ground Plane ◽  
Axial Ratio ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Antenna Size

A miniaturized microstrip-fed, wideband and circularly polarized L-shaped slot antenna is designed for ultra-wideband applications. To realize L-shaped slot antenna with wide impedance bandwidth, a stub of size 10.7 mm2 is added to a rectangular shaped slot of the ground plane. The position of the feedline is optimized to attain wide circular polarization bandwidth. The proposed antenna size is very small i.e., 25×25 mm2 . A prototype of the design is fabricated and measured. The axial ratio bandwidth (ARBW< 3 dB) of 2.2 GHz (from 6.2 GHz to 8.4 GHz) and the impedance bandwidth (S11<-10 dB) of 7.4 GHz (from 2.5 GHz to 9.9 GHz) is achieved by the proposed design. Moreover, the antenna achieves a stable radiation pattern and a gain of more than 2.8 dBi over the complete ARBW. The advantages of the structure are miniaturized design, having wide impedance bandwidth, and broad ARBW

A Broadband Circularly Polarized Cross-slotted Patch Antenna with Horizontal Meandered Strip (HMS)

Frequenz ◽  
2020 ◽  
Vol 74 (5-6) ◽  
pp. 191-199
Author(s):  
M. K. Verma ◽  
Binod K. Kanaujia ◽  
J. P. Saini ◽  
Padam S. Saini
Keyword(s):  
Circular Polarization ◽  
Patch Antenna ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Radiation Patterns ◽  
Circularly Polarized ◽  
Feeding Technique

AbstractA broadband circularly polarized slotted square patch antenna with horizontal meandered strip (HMS) is presented and studied. The HMS feeding technique provides the good impedance matching and broadside symmetrical radiation patterns. A set of cross asymmetrical slots are etched on the radiating patch to realize the circular polarization. An electrically small stub is added on the edge of the antenna for further improvement in performance. Measured 10-dB impedance bandwidth (IBW) and 3-dB axial ratio bandwidth (ARBW) of the proposed antenna are 32.31 % (3.14–4.35 GHz) and 20.91 % (3.34–4.12 GHz), respectively. The gain of the antenna is varied from 3.5 to 4.86dBi within 3-dB ARBW. Measured results matched well with the simulated results.

Bilayer split-ring chiral metamaterial based reconfigurable antenna for polarization conversion

Frequenz ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Preet Kaur ◽  
Pravin R. Prajapati
Keyword(s):  
Low Cost ◽  
Axial Ratio ◽  
Center Frequency ◽  
Impedance Bandwidth ◽  
Split Ring ◽  
Circularly Polarized ◽  
Left Hand ◽  
Rectangular Patch ◽  
Mode 2 ◽  
Chiral Metamaterial

Abstract A bilayer split-ring chiral metamaterial converts the linearly polarized wave, into a nearly perfect left or right-handed circularly polarized wave. The proposed antenna is intended to operate at center frequency of 5.80 GHz with switchable polarization capability. The polarization re-configurability is achieved by electronically switching of two PIN-diode pairs, which are embedded into bilayer split-ring Chiral Metamaterial. The optimized length of rectangular patch is 16 mm and width is 12.1 mm. Two types of radiation characteristics offered by the proposed antenna; left hand circularly polarized in mode 1 and right hand circularly polarized in mode 2. Measured results show that its impedance bandwidth is 155 MHz from 5.70 to 5.855 GHz for both mode 1 and mode 2. The measured axial-ratio bandwidth is 100 MHz from 5.75 to 5.85 GHz for mode 1 and 110 MHz from 5.73 to 5.84 GHz for mode 2. Antenna has LHCP gain of 2.52 dBi and RHCP gain of −23 dBi in mode 1. RHCP gain of 2 dBi and polarization purity of about −20 dBi is obtained in mode 2. The proposed antenna has simple structure, low cost and it has potential application in field of wireless communication (i.e., WiMax, WLAN etc.).

scholarly journals A Novel SWB Antenna with Triple Band-Notches Based on Elliptical Slot and Rectangular Split Ring Resonators

Electronics ◽  
2019 ◽  
Vol 8 (2) ◽  
pp. 202 ◽  
Author(s):  
Xiaobo Zhang ◽  
Saeed Ur Rahman ◽  
Qunsheng Cao ◽  
Ignacio Gil ◽  
Muhammad Irshad khan
Keyword(s):  
Split Ring Resonator ◽  
Ring Resonators ◽  
Impedance Bandwidth ◽  
Split Ring ◽  
Split Ring Resonators ◽  
Compact Size ◽  
Good Agreement ◽  
Swb Applications ◽  
Triple Band ◽  
Microstrip Feed

In this paper, a wideband antenna was designed for super-wideband (SWB) applications. The proposed antenna was fed with a rectangular tapered microstrip feed line, which operated over a SWB frequency range (1.42 GHz to 50 GHz). The antenna was implemented at a compact size with electrical dimensions of 0.16 λ × 0.27 λ × 0.0047 λ mm3, where λ was with respect to the lowest resonance frequency. The proposed antenna prototype was fabricated on a F4B substrate, which had a permittivity of 2.65 and 1 mm thickness. The SWB antenna exhibited an impedance bandwidth of 189% and a bandwidth ratio of 35.2:1. Additionally, the proposed antenna design exhibited three band notch characteristics that were necessary to eradicate interference from WLAN, WiMAX, and X bands in the SWB range. One notch was achieved by etching an elliptical split ring resonator (ESRR) in the radiator and the other two notches were achieved by placing rectangular split ring resonators close to the signal line. The first notch was tuned by incorporating a varactor diode into the ESRR. The prototype was experimentally validated with, with notch and without notch characteristics for SWB applications. The experimental results showed good agreement with simulated results.

CSRR-Loaded Crescent Slot Circular Antenna for WLAN/Wi-Fi Application

2021 ◽  
pp. 2250025
Author(s):  
B. Sivashanmugavalli ◽  
B. Vijayalakshmi ◽  
S. Samiullah
Keyword(s):  
Ring Resonator ◽  
Ground Surface ◽  
Split Ring Resonator ◽  
Impedance Bandwidth ◽  
Split Ring ◽  
Complementary Split Ring Resonator ◽  
Multiple Resonances

The Complementary Split-Ring Resonator (CSRR)-loaded crescent slot circular antenna is presented in this paper. The proposed antenna is resonating at 2.4[Formula: see text]GHz with the gain of 2.38[Formula: see text]dB. The antenna is designed for a predefined shape, which has a crescent slot, star-shaped small slots and spline split on a circle. The CSRR is carved on the ground surface of the antenna to acquire 2.4[Formula: see text]GHz and eliminates the multiple resonances created by various slots. The CSRR provides the miniaturization by shifting the resonance from 2.59[Formula: see text]GHz to 2.4[Formula: see text]GHz. The measured, [Formula: see text]6[Formula: see text]dB impedance bandwidth of the antenna is 11.25%. The antenna is fabricated using an FR4 ([Formula: see text]) substrate. The proposed crescent slot circular antenna is simulated using Ansys HFSS 17.0.

Sign in / Sign up

Export Citation Format

Share Document