scholarly journals Mechanochemical Approach for Oxide Reduction of Spent Nuclear Fuels for Pyroprocessing

2021 ◽  
Vol 19 (2) ◽  
pp. 255-266
Author(s):  
Sung-Wook Kim ◽  
Seung Youb Han ◽  
Junhyuk Jang ◽  
Min Ku Jeon ◽  
Eun-Young Choi
Keyword(s):  
Nuclear Fuels ◽  
Oxide Reduction

Ultra-Low Amounts of Palladium (0.005-0.05 Wt% Pd) Supported on Titania: Remarkable Low-Temperature Activity for NO Reduction with CO and Structure-Function Property Relationships in Methane Oxidation

2020 ◽  
Author(s):  
Konstantin Khivantsev ◽  
Libor Kovarik ◽  
Nicholas R. Jaegers ◽  
János Szanyi ◽  
Yong Wang
Keyword(s):  
Nitric Oxide ◽  
Carbon Monoxide ◽  
Methane Oxidation ◽  
Steam Reforming ◽  
Methane Steam Reforming ◽  
Oxide Reduction ◽  
Water Steam ◽  
Methane Steam ◽  
Anatase Titania ◽  
Nitric Oxide Reduction

<p>Atomically dispersed Pd +2 cations with ultra-dilute loading of palladium (0.005-0.05 wt%) were anchored on anatase titania and characterized with FTIR, microscopy and catalytic tests. CO infrared adsorption produces a sharp, narrow mono-carbonyl Pd(II)-CO band at ~2,130 cm<sup>-1</sup> indicating formation of highly uniform and stable Pd+2 ions on anatase titania. The 0.05 wt% Pd/TiO<sub>2</sub> sample was evaluated for methane combustion under dry and wet (industrially relevant) conditions in the presence and absence of carbon monoxide. Notably, we find the isolated palladium atoms respond dynamically upon oxygen concentration modulation (switching-on and switching off). When oxygen is removed from the wet methane stream, palladium ions are reduced to metallic state by methane and catalyze methane steam reforming instead of complete methane oxidation. Re-admission of oxygen restores Pd<sup>+2</sup> cations and switches off methane steam reforming activity. Moreover, 0.05 wt% Pd/TiO<sub>2</sub> is a competent CO oxidation catalyst in the presence of water steam with 90% CO conversion and TOF ~ 4,000 hr<sup>-1</sup> at 260 ⁰C. </p><p>More importantly, we find that diluting 0.05 wt% Pd/titania sample with titania to ultra-low 0.005 wt% palladium loading produces a remarkably active material for nitric oxide reduction with carbon monoxide under industrially relevant conditions with >90% conversion of nitric oxide at 180 ⁰C (~460 ppm NO and 150 L/g*hr flow rate in the presence of >2% water steam) and TOF ~6,000 hr<sup>-1</sup>. Pd thus outperforms state-of-the-art rhodium containing catalysts with (15-20 times higher rhodium loading; rhodium is ~ 3 times more expensive than palladium). Furthermore, palladium catalysts are more selective towards nitrogen and produce significantly less ammonia relative to the more traditional rhodium catalysts due to lower Pd amount nd lower water-gas-shift activity. Our study is the first example of utilizing ultra-low (0.05 wt% and less) noble metal (Pd) amounts to produce heterogeneous catalysts with extraordinary activity for nitric oxide reduction. This opens up a pathway to study other Pd, Pt and Rh containing materials with ultra-low loadings of expensive noble metals dispersed on titania or titania-coated oxides for industrially relevant nitric oxide abatement.</p>

Coupled Mass and Heat Transport Models for Nuclear Fuels using Thermodynamic Calculations

2018 ◽  
Author(s):  
Srdjan Simunovic ◽  
Jake W. Mcmurray ◽  
Theodore M. Besmann ◽  
Emily Moore ◽  
Markus H. A. Piro
Keyword(s):  
Heat Transport ◽  
Thermodynamic Calculations ◽  
Nuclear Fuels ◽  
Transport Models

Transportation: Fuel Energies

2017 ◽  
Author(s):  
Peter Rez
Keyword(s):  
Energy Density ◽  
Fossil Fuels ◽  
High Energy ◽  
Ease Of Use ◽  
Low Energy ◽  
High Energy Density ◽  
Nuclear Fuels ◽  
Liquid Hydrocarbons ◽  
Transportation Fuel ◽  
Journey Time

Transportation efficiency can be measured in terms of the energy needed to move a person or a tonne of freight over a given distance. For passengers, journey time is important, so an equally useful measure is the product of the energy used and the time taken for the journey. Transportation requires storage of energy. Rechargeable systems such as batteries have very low energy densities as compared to fossil fuels. The highest energy densities come from nuclear fuels, although, because of shielding requirements, these are not practical for most forms of transportation. Liquid hydrocarbons represent a nice compromise between high energy density and ease of use.

scholarly journals Nitrification Process in a Nuclear Wastewater with High Load of Nitrogen, Uranium and Organic Matter under ORP Controlled

Water ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1607
Author(s):  
Mariano Venturini ◽  
Ariana Rossen ◽  
Patricia Silva Paulo
Keyword(s):  
Ammonia Oxidation ◽  
High Load ◽  
Nuclear Fuels ◽  
Monod Model ◽  
Nernst Equation ◽  
Nitrification Process ◽  
Real Wastewater ◽  
High Concentrations ◽  
Wastewater Samples ◽  
Very High

To produce nuclear fuels, it is necessary to convert uranium′s ore into UO2-ceramic grade, using several quantities of kerosene, methanol, nitric acid, ammonia, and, in low level, tributyl phosphate (TBP). Thus, the effluent generated by nuclear industries is one of the most toxic since it contains high concentrations of dangerous compounds. This paper explores biological parameters on real nuclear wastewater by the Monod model in an ORP controlled predicting the specific ammonia oxidation. Thermodynamic parameters were established using the Nernst equation to monitor Oxiders/Reductors relationship to obtain a correlation of these parameters to controlling and monitoring; that would allow technical operators to have better control of the nitrification process. The real nuclear effluent is formed by a mixture of two different lines of discharges, one composed of a high load of nitrogen, around 11,000 mg/L (N-NH4+-N-NO3−) and 600 mg/L Uranium, a second one, proceeds from uranium purification, containing TBP and COD that have to be removed. Bioprocesses were operated on real wastewater samples over 120 days under controlled ORP, as described by Nernst equations, which proved to be a robust tool to operate nitrification for larger periods with a very high load of nitrogen, uranium, and COD.

Diffusion of heavy elements in nuclear fuels: actinides in UO2

1965 ◽  
Vol 17 (3) ◽  
pp. 259-269 ◽  
Author(s):  
F. Schmitz ◽  
R. Lindner
Keyword(s):  
Heavy Elements ◽  
Nuclear Fuels
Sign in / Sign up

Export Citation Format

Share Document