scholarly journals Influence of Sulphur and Boron on Growth and Yield of Garden Pea (Pisum sativum L.)

2021 ◽  
pp. 1-13
Author(s):  
Shovan Krishna Das ◽  
Khaleda Khatun ◽  
Tahmina Mostarin ◽  
Mutasim Fuad Shuvo ◽  
Kanij Fatima ◽  
...  
Keyword(s):  
Plant Height ◽  
Growth And Yield ◽  
Treatment Combination ◽  
Garden Pea ◽  
Pod Yield ◽  
Pisum Sativum L ◽  
Two Factors ◽  
Green Pea ◽  
Pod Length ◽  
Number Of Seeds

An experiment was conducted at the Horticulture Farm of Sher-e-Bangla Agricultural University, Dhaka during the period from October, 2018 to March, 2019 to study the influence of sulphur and boron on growth and yield of garden pea. The experiment comprised of two factors. Factor A: Levels of Sulphur (4 levels); S0: 0 kg S/ha (Control), S1: 10 kg S/ha, S2: 20 kg S/ha, S3: 30 kg S/ha and Factor B: Levels of Boron (4 levels); B0: 0 kg B/ha (Control), B1: 1 kg B/ha, B2: 2 kg B/ha, B3: 3 kg B/ha. This experiment was laid out in Randomized Complete Blocked Design (RCBD) with three replications. Sulphur and Boron application influenced significantly on most of the parameters. In case of sulphur, maximum plant height (50.84 cm), number of pods per plant (14.00), pod length (8.95 cm), number of seeds per pod (5.56) and green pod yield (10.76 t/ha) were recorded from S3 treatment. In case of boron application, maximum plant height (49.17 cm), number of pods per plant (13.48), pod length (8.66 cm), number of seeds per pod (5.41) and green pod yield (10.14 t/ha) were found in B2 treatment. Among the treatment combination, S3B2 treatment gave the highest green pod yield (12.19 t/ha) and the lowest (5.38 t/ha) was obtained from S0B0 treatment. So, garden pea sown at 30 kg S/ha with 2 kg B/ha for suitable green pea production in Dhaka region.

scholarly journals Performance of garden pea varieties for their growth and yield characteristics in Vidharbha region of Maharashtra, India

2017 ◽  
Vol 9 (4) ◽  
pp. 2300-2304
Author(s):  
Pushpendra Khichi ◽  
Rajani Pant ◽  
Sandeep Upadhayay
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Black Soil ◽  
Growth And Yield ◽  
Garden Pea ◽  
Pod Yield ◽  
Randomized Block Design ◽  
Soluble Solid ◽  
Arid Condition ◽  
Pod Length

An experiment was conducted in 2013 to study the performance of different varieties of garden pea under Akola condition at Department of Horticulture Dr.Punjabrao Deshmukh Krishi Vidhyapeeth, Akola, Maharashtra. Eight varieties were evaluated on black soil in replicated randomized block design and Results were found significant for all characters among these varieties. All varieties exhibited considerable variation in their performance for most of the parameters. Better growth and yield parameters in terms of plant height (cm), number of branches/plant, days to first flowering, number of green pod/plant, green pod weight, green pod length, pod yield/plant, green pod yield per plot and green pod yield per ha were noticed in all varieties. Maximum plant height was observed in Jawahar Matar-2 (72.26 cm) and minimum was in Palam Priya (28.46 cm). In case of number of pods plant-1 was maximum in PB-89 (16.43) followed by Palam Triloki (13.9) and minimum in Jawahar Matar-2 (9.83). Similarly for pod characters, average pod weight, maximum pod weight was recorded in PB-89 (6.12 g) and minimum was recorded in Arka Kartik (3.27g). Green pod yield/plant was highest in PB-89 (87.93 g), Palam Triloki (75.45 g) and Ankur (68.42 g). Whereas, maximum green pod/yield. was recorded in PB-89 (93.12q/ha) followed by Palam Triloki (76.97q/ha). Among all these varieties highest protein and Total Soluble Solid contents was recorded in Palam Triloki variety (23.06% and 17.67% respectively). PB-89, Palam Triloki and Ankur had the highest yields over the others, hence, they are recommended to farmers in semi-arid condition of Vidharba region for cultivation.

scholarly journals Yield potential of garden pea varieties at varied harvesting dates

2015 ◽  
Vol 17 (2) ◽  
pp. 21-28
Author(s):  
SR Haque ◽  
N Akter ◽  
MAH Khan ◽  
K Kabir ◽  
MM Islam
Keyword(s):  
Field Experiment ◽  
Plant Breeding ◽  
Block Design ◽  
Yield Potential ◽  
Treatment Combination ◽  
Garden Pea ◽  
Harvesting Time ◽  
Pod Yield ◽  
Randomized Complete Block Design ◽  
Two Factors

A field experiment was carried out at the experimental field of Department of Genetics and Plant Breeding of Bangabandhu Sheikh Mujibur Rahman Agricultural University, Salna, Gazipur during November 2008 through April 2009 to find out the performance of different pea varieties at different harvesting time. The treatments consisted of two factors, which were four harvesting times (70, 80, 90 and 100 days after sowing) and six varieties of garden pea (IPSA Motor shuti-1, IPSA Motor shuti-2, IPSA Motor shuti-3, BARI Motor shuti-1, BARI Motor shuti-3 and Local white). The experiment was laid out in a randomized complete block design with three replications. The maximum pod yield (11.42 t ha-1) was obtained from BARI Motor shuti-1 harvesting at 80 days after sowing which was statistically similar to IPSA Motor shuti-2  harvesting at 80 days after sowing and Local white at same harvesting date and superior to the rest of the treatment combination. The lowest pod yield (5.25 t ha-1) was produced by BARI Motor shuti-1 harvesting at 70 days after sowing.Bangladesh Agron. J. 2014, 17(2): 21-28

Effects of Artificial Defoliation on the Growth and Yield of Okra (Abelmoschus esculentus)

1987 ◽  
Vol 23 (1) ◽  
pp. 1-7
Author(s):  
G. O. Iremiren
Keyword(s):  
Plant Height ◽  
Lower Half ◽  
Abelmoschus Esculentus ◽  
Growth And Yield ◽  
Significant Time ◽  
Pod Yield ◽  
Yield Parameters ◽  
Delayed Flowering ◽  
Pod Length

SUMMARYArtificial defoliation of okra 4, 6 and 8 weeks after sowing generally delayed flowering, decreased plant height and stem girth at flowering and reduced the harvest duration. Pod length, pod diameter, mean pod weight and number of pods plant−1 were also decreased by defoliation but pod yield ha−1 was not.The removal of leaves from the upper half of the stem only had a similar effect to complete defoliation whereas the removal of leaves from the lower half only had no significant effect, indicating that the leaves on the upper stem contributed more to growth and yield than those lower down. Significant time × degree of defoliation interactions occurred for most growth and yield parameters.

scholarly journals Growth and Yield Comparison of French Bean as Influenced by Three Varieties and Nutrients

2021 ◽  
pp. 8-19
Author(s):  
Mousumi Akter ◽  
Tahmina Mostarin ◽  
Khaleda Khatun ◽  
Md. Abdus Samad ◽  
Md. Ehsanul Haq ◽  
...  
Keyword(s):  
Block Design ◽  
Growth Yield ◽  
Maximum Growth ◽  
French Bean ◽  
Growth And Yield ◽  
Treatment Combination ◽  
Pod Yield ◽  
Randomized Complete Block Design ◽  
Two Factors ◽  
Suitable Combination

The experiment was conducted in the Horticultural Farm of Sher-e-Bangla Agricultural University, Dhaka, Bangladesh with aim to find out the suitable variety, optimum nutrients and suitable combination variety and optimum nutrients for maximum growth, yield of French bean in Bangladesh. The experiment consisted of two factors. Factor A: different varieties as V1 = BARI French bean-1, V2= BARI French bean-2, V3= BARI French bean-3 and Factor B: different level of nutrients as N1= cowdung (5 t/ha) + vermicompost (2 t/ha), N2= cowdung (5 t/ha) + N90 P30 K45 kg/ha, N3= cowdung (5 t/ha) + vermicompost (2 t/ha) + N90 P30 K45 kg/ha. The experiment was laid out in a Randomized Complete Block Design with three replications. In case of different varieties of French bean the maximum number of flowers (27.83), the highest number of pod harvested per plant (22.14) and the highest pod yield (15.95 t/ha) were found from V2, whereas the lowest was from V3. For the different levels of nutrients1 the highest number of flowers (25.58), the highest number of pod per plant (20.60) and the highest pod yield (14.10 t/ha) were recorded from N2 treatment, while the lowest was from N1 treatment. Due to the combined effect, the maximum number of flowers (32.02), the maximum number of pod harvested per plant (26.50), the highest pod yield (18.92 t/ha) were observed from V2N2 treatment combination, while the lowest were from V3N1 treatment combination. Therefore, the V2N2 treatment combination appeared to be the best for achieving the higher growth and yield of French bean.

scholarly journals PENGARUH DOLOMIT DAN PUPUK P TERHADAP PERTUMBUHAN DAN PRODUKSI KACANG TANAH (Arachis hypogaea L.) SEBAGAI TANAMAN SELA DIANTARA KELAPA SAWIT DI LAHAN GAMBUT

2019 ◽  
Vol 33 (3) ◽  
pp. 213-222
Author(s):  
Fitria Darpis ◽  
Nelvia Nelvia ◽  
Islan Islan
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Fertilizer Application ◽  
Growth And Yield ◽  
Arachis Hypogaea L ◽  
Two Factors ◽  
P Fertilizer ◽  
Range Test ◽  
Number Of Seeds ◽  
Filled Seeds

The research aims to study the interaction of dolomite dose and P fertilizer application on growth and yield of peanut plants as intercropped between palm oil on peatland. The study was conducted in the agriculture experimental station Faculty of Agriculture, University of Riau, Rimbo Panjang village, Kampar District, from December 2015 to April 2016. The research utilizes a Randomized Complete Block Design (RCBD), which consists of two factors. The first factor is dolomite consists of 3 levels (0, 500 and 1000 kg/ha) and second factor P fertilizer consists of 4 levels (0, 23, 46 and 69 kg P2O5/ha), each combination has 4 replication. The parameters observed were plant height, number of primary branches, flowering age, harvesting age, number of pods, number of seeds per pods, the weight of dry seeds and filled seeds/m2, percentage of filled seeds, the weight of 100 seeds. The data of each parameter were analyzed with analysis of variance (ANOVA) followed by Duncan's New Multiple Range Test (DNMRT) at 5% level. The results showed that the increase of weight of dry seeds and filled seeds /m2were significant at the application of 69 kg P2O5/hafollowed by 500 kg dolomite/ha and percentage of filled seeds at the application of 69 kg P2O5/hafollowed by 1000 kg dolomite/ha compared to without P fertilizer and dolomite, whereas in plant height, number of primary branches, flowering age, harvesting age, number of pods, number of seeds per pods and weight 100 seeds were not significant each combination of treatments.

scholarly journals Effect of elevated CO2 and temperature on growth and yield contributing parameters of pea (Pisum sativum L.) crop

2021 ◽  
Vol 21 (1) ◽  
pp. 7-11
Author(s):  
MEENA KUMARI ◽  
S.C. VERMA ◽  
S.K. BHARDWAJ
Keyword(s):  
Elevated Temperature ◽  
Pisum Sativum ◽  
Elevated Co2 ◽  
Growth And Yield ◽  
Fresh Weight ◽  
Pooled Data ◽  
Pod Yield ◽  
Pisum Sativum L ◽  
Elevated Co2 And Temperature ◽  
Pod Length

An experiment was conducted during 2014 and 2015 at Solan, Himachal Pradesh to study the effect of elevated CO2 (eCO2) and temperature (eT) on growth and yield contributing parameters of pea (Pisum sativum L.) crop under four conditions of CO2 and temperature in open top chambers and open natural condition. The study revealed that pea plants performed better under eCO2, with slight changes in development and yield attributing traits, depending on the cultivars. However, the beneficial direct impactof elevated CO2 (eCO2) on crop yield can counteract by elevated temperature (eT). Pooled data for two years indicated that growth and yield attributing traits like plant height, days to first harvest of pods, harvest duration, fresh weight and biomass, number of pods per plant, pod length, pod girth, pod yield were improved under eCO2. However, responses of these attributes were negated with eT. Pea cultivars PB-89 performed well under eCO2 and eT conditions as compared to Azad P-1.

STUDY OF EFFECT OF EMS, MMS AND GR ON YIELD CONTRIBUTING TRAITS IN URDBEAN, VIGNA MUNGO

2017 ◽  
Vol 23 (1) ◽  
Author(s):  
A. B. SAGADE
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Seed Weight ◽  
Inhibitory Effect ◽  
Individual Plant ◽  
Mean Values ◽  
Methane Sulphonate ◽  
Pod Length ◽  
100 Seed Weight ◽  
Number Of Seeds

The study of the effect of three well known mutagens, ethyl methane sulphonate (EMS), methyl methane sulphonate (MMS) and gamma rays (GR) on the yield contributing traits of the urdbean variety TPU-4 were carried out in the M3 generation. Effect of selected mutagenic treatments/doses of EMS (0.02, 0.03 and 0.04 M), MMS (0.0025, 0.05 and 0.01 M) and (GR) (30, 40 and 50 KR) on different yield contributing traits like plant height, plant spread, number of pods per plant, pod length, number of seeds per pod, seed yield per plant and 100 seed weight were analyzed in the M3 populations of the variety TPU-4. Seeds of M2 plants and control were harvested separately and sown to raise M3 population.. Genetic variabilty in the mutagen administered M3 progeny of the urdbean variety TPU-4 was analyzed by employing statistical methods. Data on mean values and shift in the mean of seven quantitative traits was evaluated on individual plant basis. The experimental findings revealed that concentrations / dose of the all these mutagens showed inhibitory effect on plant height, number of pods per plant, pod length and number of seeds per pod. Lower concentrations of mutagens exerted a promotory effect on plant spread, 100 seed weight and seed yield per plant while higher concentrations of these mutagens inhibited them to different extent.

PENGARUH KOMPOS SAMPAH KOTA DAN PUPUK KANDANG SAPI TERHADAP PERTUMBUHAN DAN HASIL TANAMAN PAKCOY (BRASSICA RAPA, L. CHINENSIS) PADA ALUVIAL KABUPATEN INDRAMAYU

2018 ◽  
Vol 9 (2) ◽  
pp. 153-163
Author(s):  
Wiwik Ambarsari ◽  
Henly Yuliana
Keyword(s):  
Plant Height ◽  
Brassica Rapa ◽  
Block Design ◽  
Cattle Manure ◽  
Growth And Yield ◽  
Randomized Block Design ◽  
Two Factors ◽  
Number Of Leaves ◽  
Experimental Garden

The study aimed to determine the effect of the combination of city waste compost and cattle manure on the growth and yield of pakcoy plants (Brassica rapa, L. Chinensis) in Aluvial, Indramayu Regency. The study was conducted at the Experimental Garden of the Faculty of Agriculture, Wiralodra University, Indramayu Regency from March to August 2018. This study used Factorial Pattern Randomized Block Design with two factors. The first factor is city waste compost and the second factor is cattle manure with 4 levels: 0%, 3.0%, 6.0%, and 9.0%, repeated twice. The results showed that there was an independent influence between city waste compost and cattle manure on plant height and number of leaves. The best combination to increase the feasibility weight of pakcoy consumption is by giving city waste compost 9.0% (S4) and cattle manure 6.0% (K3).

scholarly journals Response of growth and yield of two soybean varieties to seed pre-treatment applications

2021 ◽  
Vol 883 (1) ◽  
pp. 012052
Author(s):  
N Herawati ◽  
A R Aisah ◽  
I Mardian ◽  
B N Hidayah ◽  
B T R Erawati
Keyword(s):  
Plant Height ◽  
Seed Treatment ◽  
Seed Quality ◽  
Block Design ◽  
Growth And Yield ◽  
Agronomic Crops ◽  
Randomized Block Design ◽  
Two Factors ◽  
Pre Treatment ◽  
Four Levels

Abstract Plant growth is influenced by seed quality. Seeds need to be treated to prevent pest and disease disorders or to increase seed germination. Soybean planting was carried out in this study by the treatment of varieties and seed pre-treatment application before planting. The study aimed to measure the growth and yield of soybeans by varieties and seed treatment before planting, carried out in the Village of Nggembe, District of Bolo, Bima Regency. The study used factorial randomized block design with two factors. The first factor was soybean varieties consisting of two levels, namely Devon and Dena varieties, and the second factor was the application of pre-planting seed treatments consisting of four levels namely Cruiser, Marshall, Agrisoy, and without seed treatment, each treatment was repeated three times. Observations were made on the performance of agronomic crops and soybean yields. The results showed that the treatment of soybean varieties and the application of seed treatment had a significant influence on plant height and soybean productivity, and both treatments had interactions on parameters of plant height, number of filled pods, weight of 100 seeds, and soybean productivity with the best results successively produced by a combination of Devon-Control, Devon-Marshall, Devon-Agrisoy, and Dena-Cruiser.

scholarly journals Optimasi Dosis Pupuk Kandang Ayam dan NPK pada Budidaya Kubis Bunga (Brassica oleracea var. Botrytis L.)

2021 ◽  
Vol 2 (1) ◽  
pp. 32
Author(s):  
Irpan Gunawan ◽  
Atak Tauhid ◽  
Isna Tustiyani
Keyword(s):  
Leaf Area ◽  
Plant Height ◽  
Block Design ◽  
Chicken Manure ◽  
Growth And Yield ◽  
Randomized Block Design ◽  
Affected Plant ◽  
Two Factors ◽  
Number Of Leaves ◽  
Npk Fertilizer

<p><em>Cauliflower is one of the vegetables for consumers. The demand for cauliflower was rising so it must be scaled up with fertilizer. The purpose of this study was to study the effect of chicken manure and NPK fertilizer on the growth and yield of cauliflower. The study was conducted in Sukasenang Village, Banyuresmi Sub-district, Garut Regency from July to August 2019. The study used a Randomized Block Design (RBD) in two factors each of the 3 rates with 2 replications. The first factor was the rates of chicken manure which consisted of 0, 10 and 20 tons ha<sup>-1</sup>; the second factor was NPK fertilizer which consists of 0, 100 and 200 kg ha<sup>-1</sup>. The parameter of this research was plant height, number of leaves, leaf area, weight and diameter crud. The results showed that there was no interaction between the chicken manure and NPK fertilizer. The treatment of 20 tons ha<sup>-1</sup> chicken manure affected the variable plant height, the number of leaves and leaf area. The rates of 200 kg ha<sup>-1</sup> NPK fertilizer had affected plant height, number of leaves, weight and diameter crud.</em></p>

Sign in / Sign up

Export Citation Format

Share Document