scholarly journals Improving Shear Strength Parameters of Sandy Soil using Enzyme-Mediated Calcite Precipitation Technique

2018 ◽  
Vol 20 (2) ◽  
pp. 91 ◽  
Author(s):  
Heriansyah Putra ◽  
Hideaki Yasuhara ◽  
Naoki Kinoshita ◽  
Erizal . ◽  
Tri Sudibyo
Keyword(s):  
Shear Strength ◽  
Sandy Soil ◽  
Friction Angle ◽  
Soil Improvement ◽  
Soil Mass ◽  
Shear Strength Parameters ◽  
Calcite Precipitation ◽  
Strength Parameters ◽  
Direct Shear Tests ◽  
Potential Applications

Several methods have been established for their various potential applications as soil improvement technique, and recently the application of grouting technique using biological process have been proposed. This study discussed the applicability of enzyme-mediated calcite precipitation (EMCP) in improving the shear strength parameters of sandy soil.  In this study, soil specimens were prepared and treated with the grouting solutions composed of urea, calcium chloride, magnesium sulfate and enzyme of urease. Evolutions in the cohesion and internal friction angle of the improved soil were examined through the direct shear tests. The presence of the precipitated materials, comprising 4.1 percent of the soil mass of the treated sand, generated a cohesion of 53 kPa. However, contrary to the improvement of cohesion, the friction angle is relatively constant. It indicated that the application of the EMCP technique has no significant impact on the friction angle

scholarly journals Mechanical Behaviour of Reinforced Sand with Natural Curauá Fibers through Full Scale Direct Shear Tests

2019 ◽  
Vol 92 ◽  
pp. 12003
Author(s):  
Leila Maria Coelho de Carvalho ◽  
Michelé Dal Toé Casagrande
Keyword(s):  
Shear Strength ◽  
Sandy Soil ◽  
Soil Reinforcement ◽  
Direct Shear ◽  
Shear Strength Parameters ◽  
Shear Tests ◽  
Strength Parameters ◽  
Direct Shear Tests ◽  
Soil Shear Strength ◽  
Curaua Fibers

Inclusion of natural fibers (sisal, curauá, coco fiber and others) for soil improvement has been the study object in diverse geotechnical areas and it is a topic of growing interest, within the research area of new geotechnical materials. The state of the art in this subject highlights excellent results as soil strength parameters improve and post-cracking strength (toughness) increase. Soil reinforcement technique with fibers is established in the technology of composite materials, this being a combination of two or more materials presenting properties that the component materials do not possess on their own. The aim of this paper is to study the mechanical behaviour of sand-fiber composite by inserting natural curauá fibers into a sandy matrix, with different fiber contents. The fibers were randomly distributed in the soil mass. The experimental program included physical and mechanical characterization of the composites, using full-scale direct shear tests, with samples measuring 30 x 30 cm and 15 cm high. Direct shear tests were carried out using fibers with 25 mm length and 0.5 and 0.75% fiber content (relative to the soil dry weight). The specimens also presented a relative density of 50% and moisture content of 10%. It was sought to establish a pattern behaviour so that the addition of curauá fiber influence can be explained, thus, comparing with the sandy soil shear strength parameters. Inclusion of natural curauá fibers as soil reinforcement presented satisfactory results, as an increase in the soil shear strength parameters was observed when compared with sandy soil results.

scholarly journals Effect of Soaking and Non-soaking Condition on Shear Strength Parameters of Sandy Soil Treated with Additives

2019 ◽  
Vol 5 (5) ◽  
pp. 1147-1161
Author(s):  
Roaa M. Fadhil ◽  
Haifaa A. Ali
Keyword(s):  
Shear Strength ◽  
Internal Friction ◽  
Sandy Soil ◽  
Dry Weight ◽  
Natural State ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
Angle Of Internal Friction ◽  
Direct Shear Tests ◽  
Before And After

The present paper aims to improve shear strength parameters: cohesion (c), and angle of internal friction (∅) for sandy soil treated by additives before and after soaking. The samples of sandy soil were obtained from Karbala city and then classified as poorly graded sand (SP) with relative density Dr (30%) according to the system of (USCS). The experiment has three stages. In the first stage ,the soil was treated with three different  percentages of cement (3 ,5 and 7%) of dry weight for the soil with three different percentages of water content (2, 4 and 8%) in each above percentage of cement, while the second stage includes (2%) of lime  from  soil weight  mixed with each different percentage of cement . In the third stage, (50%) of polymer of cement weight was mixed with each different percentage of cement. An analysis of behavior sandy soils treated by additives was carried out with the Direct Shear Tests. All the samples were cured (3) days before and after soaking. The results of the experiment showed that increase in shear strength parameters of sandy soil; especially the angle of internal friction with the rate value (16.6 %) of cement only, (21.88 %) of cement with lime , (20.3%) of cement with the polymer before soaked condition. After soaking condition, it was increased with the rate value (14.3%) with cement only, (23.57%) of cement with lime, and (15.38%) of cement with the polymer as compared with soil in the natural state.

Study on the Granular Shear Strength Parameters of Dumping Site

2012 ◽  
Vol 256-259 ◽  
pp. 358-361
Author(s):  
Xiang Yun Kong ◽  
Guang Jin Wang ◽  
Xiao Chao Zhou
Keyword(s):  
Particle Size ◽  
Grain Size ◽  
Shear Strength ◽  
Internal Friction ◽  
Friction Angle ◽  
Internal Friction Angle ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
Dumping Site ◽  
Size Grading

Apparent particle size grading is the important characteristic of super-high bench dumping site, and the critical factors with the impact of its stability and disaster prevention are the fragmentation distribution and shear strength parameters of granular. With the copper mine dumping site which had the feature of apparent particle size grading, the thesis carried out the study of on-site particle size investigation and indoor laboratory. The particle-size distribution law with the changing of dumping-site height was analyzed and quantitative relationship between the fragmentation distribution and shear strength parameters of granular was discussed. The research results indicated that coarse-grain contents and maximum grain size were increased significantly according to the decreasing of dumping-site height, which showed that the dumping-site had the feature of apparent particle size grading. The coarse particle content in the grain size composition and internal friction angle φ of shear strength parameters increased with the obvious increment of the distribution value B. The relationship between distribution value B and the internal friction angle φ could be expressed by exponential function curve.

scholarly journals UNDRAINED SHEAR STRENGTH PARAMETERS OF SAPROCK FROM A WEATHERING PROFILE OVER PORPHYRITIC BIOTITE GRANITE AT KM 31 OF THE KUALA LUMPUR - KARAK HIGHWAY, PENINSULAR MALAYSIA

2021 ◽  
Vol 33 (2) ◽  
Author(s):  
John Kuna Raj
Keyword(s):  
Shear Strength ◽  
Friction Angle ◽  
Undrained Shear Strength ◽  
Triaxial Tests ◽  
Regression Analyses ◽  
Shear Strength Parameters ◽  
Weathering Profile ◽  
Strength Parameters ◽  
Zone Ii ◽  
Undrained Shear

Three broad zones can be differentiated at the weathering profile; an upper, 9.4 m thick, pedological soil (zone I), an intermediate, 31.7 m thick, saprock (zone II) and the bottom bedrock (zone III). The saprock (zone II) comprises gravelly silty sands that distinctly preserve the minerals, textures and structures of the original granite and can be separated into sub-zones II A, II B, II C, and II D, based on differences in preservation of relict structures and content of litho-relicts (core-boulders). To characterize the undrained strength of saprock, samples were collected from sub-zones II A, II B, II C and II D and their physical and soil index properties determined before unconsolidated undrained triaxial tests were carried out on remolded samples. Three to four individual samples from each sub-zone were compressed under confining pressures of 138 kPa, 207 kPa, 276 kPa and/or 345 kPa. Plots of pf = [(σ1 + σ3)/2] versus qf = [(σ1 - σ3)/2] were then used to calculate apparent cohesions of 41.9 kPa, 100.3 kPa, 76.1 kPa and 73.9 kPa, and friction angles of 32.2o, 28.1o, 26.6o and 27.8o, for the samples from sub-zones II A, II B, II C, and II D, respectively. Regression analyses show apparent cohesions to decrease with increasing clay contents, and degrees of saturation; features indicating the influence of negative pore water (or suction) pressures. Regression analyses also show apparent friction angle to increase with increasing sand contents; a feature attributed to greater inter-locking and resistance to displacement of these particles. It is concluded that the undrained shear strength parameters of saprock are characterized by an average apparent cohesion of 54.6 kPa, and friction angle of 30.5o; the parameters influenced by the degree of saturation as well as clay and sand contents.

Reliability of Shear-Box Tests Upon Soaking Process on the Sand Soil in Al-Najaf City

2020 ◽  
Vol 857 ◽  
pp. 212-220
Author(s):  
Mohammed Sh. Mahmood ◽  
Waseem H. Al-Baghdadi ◽  
Asaad M. Rabee ◽  
Suhad H. Almahbobi
Keyword(s):  
Shear Strength ◽  
Internal Friction ◽  
Sandy Soil ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
Engineering Structures ◽  
Angle Of Internal Friction ◽  
Shear Box ◽  
Testing Condition ◽  
Direct Shear Apparatus

Accurate prediction of the soil shear strength parameters is essential in the reliable geotechnical design of civil engineering structures. This recent paper investigates the effect of the dry testing condition on the shear strength parameters of the sandy soil using the direct shear apparatus and compared with the saturated condition tests in previous researches on the same soil. The dry soil, usually above the water table, is the principal condition of the Al-Najaf city soil in Iraq. Samples are selected from the site of the University of Kufa, which represents the sandy soil of the city. For reliability purposes, the soil is exposed to different pre-soaking durations (one, two, and four weeks) then air-dried for shear tests. The main results revealed that the angle of internal friction (Φ) tested as a dry sample decreases about -6% up to two-weeks soaking then recovered upon four-week soaking about +6%. Compared to the saturated testing, there are increases in F between 6%-17% from saturated tests. Finally, it is recommended to aware in the selection of testing conditions for calculations of the angle of internal friction.

scholarly journals The Influence of Compaction and Water Conditions on Shear Strength and Friction Resistance between Geotextiles and Ash-Slag Mixture

Energies ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1086
Author(s):  
Andrzej Gruchot ◽  
Tymoteusz Zydroń ◽  
Agata Michalska
Keyword(s):  
Shear Strength ◽  
Internal Friction ◽  
Water Saturation ◽  
Friction Angle ◽  
Interaction Coefficient ◽  
Interfacial Friction ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
Angle Of Internal Friction ◽  
Friction Resistance

The paper presents the results of tests of the shear strength of the ash–slag mixture taken from the landfill located in Kraków (Poland) and the interfacial friction resistance at the contact between the ash–slag mixture and woven or nonwoven geotextiles. The tests were carried out in a direct shear apparatus on samples with and without water saturation. The samples for testing were formed in the apparatus box at the optimum moisture by compacting them to IS = 0.90 and 1.00. The test results reveal that the shear strength parameters of the ash-slag mixture were large. It was stated the significant influence of the compaction, the growth of which has resulted in an increase in the angle of internal friction (from 7% to 9%) and cohesion (from 60% to 97%). Whereas the saturation of the samples reduced the shear strength parameters (from 4% to 6%, of the internal friction angle and 30% to 43% of cohesion). The values of the interfacial friction resistance at the contact between the ash–slag mixture and the geotextiles were large as well, but slightly smaller than the values of the shear strength parameters of the mixture itself. The compaction caused an increase in the angle of interfacial friction (from 1% to 5%) and adhesion (from 31% to 127%). The water-saturation of the samples caused a change in the angle of interfacial friction (from −6% to 3%) and decline in the adhesion (from 22% to 69%). Values of the interaction coefficient were about 0.8–1.0 and they tended to rise with increasing the normal stress. Higher values of this parameter were obtained in tests with water saturation and for non-woven geotextiles.

scholarly journals Application of Innovative Ropes from Textile Waste as an Anti-Erosion Measure

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1179
Author(s):  
Giang Nguyen ◽  
Joanna Grzybowska-Pietras ◽  
Jan Broda
Keyword(s):  
Shear Strength ◽  
Physical And Mechanical Properties ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
Synthetic Fibers ◽  
Direct Shear Tests ◽  
Hydraulic Conditions ◽  
Soil Shear Strength ◽  
Erosion Protection ◽  
Recycled Material

Using materials from recycling is a key part of decreasing present-day waste. It is optimal for recycled material to be used in environmental protection. This paper presents the application of geotextile ropes in erosion protection of a slope of a gravel pit. To protect the slope, thick ropes with a diameter of 120 mm made from wool and a mixture of recycled natural and synthetic fibers were used. After 47 months from installation, soil and rope specimens were taken from the slope parts with inclinations 1:1 and 1:1.8, and their physical and mechanical properties were determined. Direct shear tests were applied to determine the soil shear strength parameters in state at sampling and at Ic = 0 (unconsolidated and consolidated). Based on the obtained soil shear strength parameters, the loads on the ropes were determined, taking into account also unfavorable hydraulic conditions and compared to rope strength. It was shown that even after 47 months from installation, rope tension strength was higher as tension forces were induced in the ropes in every case. At present, whole slopes in protected sections are stabilized, without rills and gullies.

scholarly journals Measuring shear strength parameters of polymer-added bentonite-sand mixtures in laboratory experiments

2019 ◽  
Vol 92 ◽  
pp. 11014
Author(s):  
Hakki O. Ozhan
Keyword(s):  
Shear Strength ◽  
Tap Water ◽  
Friction Angle ◽  
Unit Weight ◽  
Polymer Content ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
Anionic Polymer ◽  
Sand Mixture ◽  
Polymer Addition

In order to evaluate the shear strength parameters of an anionic polymer-added bentonite-sand mixture that was permeated with tap water, Proctor compaction tests and direct shear tests were performed on the mixture with a bentonite content of 15% by mass. The polymer content in the polymer-bentonite mixture was chosen as 0.5, 1, 2, 5, 10, 15 and 20% by mass, respectively. According to the results, maximum dry unit weight (Vdmax) first decreased as the polymer content was increased to 1% and then, increased. Vdmax of 20% polymer-added mixture and the mixture without polymer addition was measured as 17.55 and 17.28 kN/m3, respectively. Test results indicated that cohesion (c) increased and internal friction angle (ø) decreased due to polymer addition. 2% polymer addition caused an increase of 42 kPa in c but a decrease of 4.2° in ø. As the polymer content increased, maximum shear strength of the mixture (τmax) increased. τmax increased from 171.8 to 197.8 kPa as the polymer content was increased from 0 to 2%. As a result, 2% anionic polymer-added bentonite-sand mixture provided sufficient increase in the shear strength of the mixture.

Sign in / Sign up

Export Citation Format

Share Document