Development of Waste Polystyrene as a binder for emulsion paint formulation II: Effect of different types of Solvent

Author(s):  
2007 ◽  
Vol 6 (22) ◽  
pp. 2532-2540 ◽  
Author(s):  
S A Osemeahon ◽  
Barminas ◽  
T J ◽  
Aliyu ◽  
B A ◽  
...  

2021 ◽  
Vol 46 (1) ◽  
Author(s):  
H.C. Ndibe ◽  
J. U. Iyasele ◽  
E.O. Imanah ◽  
G. E. Okpara ◽  
I. Eriamiatoe

Studies were conducted on blends of liquid natural rubber (LNR) and polyvinyl acetate (PVAc).The two polymers were characterized based on their physicochemical properties, and used in paint production. Results obtained showed that viscometric measurement and density of the polymers did not differ much. Five paints of different compositions labeled; Paint 1 (100% PVAc), Paint 2 (100% LNR), Paint 3 (75% LNR: 25% PVAc), Paint 4 (50% PVAc: 50% LNR), and Paint 5 (25% LNR: 75% PVAc) using standard emulsion paint formulation and method of production were employed. The paint samples were subjected to quality test. Most of the emulsion paint showed good quality test when compared by the Standard Organisation of Nigeria (SON). Paint 1 had an excellent viscosity and adhesion when compared with Paint 2 and other samples. Also, Paint 5 recorded 22.0poise for viscosity and 0.68kgf for adhesion when compared with other paint blends. This shows that, emulsion paint formulated blends of LNR/PVAc with percentage composition 25% LNR; 75%PVAc exhibited best performance characteristics in terms of test conducted. The results suggest that LNR and PVAc are compatible as binders in emulsion paint production. Therefore, LNR/PVAc blends could be used as binder in the coating industry as an alternative to PVAc binder based emulsion paint.


1986 ◽  
Vol 23 (04) ◽  
pp. 851-858 ◽  
Author(s):  
P. J. Brockwell

The Laplace transform of the extinction time is determined for a general birth and death process with arbitrary catastrophe rate and catastrophe size distribution. It is assumed only that the birth rates satisfyλ0= 0,λj> 0 for eachj> 0, and. Necessary and sufficient conditions for certain extinction of the population are derived. The results are applied to the linear birth and death process (λj=jλ, µj=jμ) with catastrophes of several different types.


2020 ◽  
Vol 43 ◽  
Author(s):  
Rajen A. Anderson ◽  
Benjamin C. Ruisch ◽  
David A. Pizarro

Abstract We argue that Tomasello's account overlooks important psychological distinctions between how humans judge different types of moral obligations, such as prescriptive obligations (i.e., what one should do) and proscriptive obligations (i.e., what one should not do). Specifically, evaluating these different types of obligations rests on different psychological inputs and has distinct downstream consequences for judgments of moral character.


Author(s):  
P.L. Moore

Previous freeze fracture results on the intact giant, amoeba Chaos carolinensis indicated the presence of a fibrillar arrangement of filaments within the cytoplasm. A complete interpretation of the three dimensional ultrastructure of these structures, and their possible role in amoeboid movement was not possible, since comparable results could not be obtained with conventional fixation of intact amoebae. Progress in interpreting the freeze fracture images of amoebae required a more thorough understanding of the different types of filaments present in amoebae, and of the ways in which they could be organized while remaining functional.The recent development of a calcium sensitive, demembranated, amoeboid model of Chaos carolinensis has made it possible to achieve a better understanding of such functional arrangements of amoeboid filaments. In these models the motility of demembranated cytoplasm can be controlled in vitro, and the chemical conditions necessary for contractility, and cytoplasmic streaming can be investigated. It is clear from these studies that “fibrils” exist in amoeboid models, and that they are capable of contracting along their length under conditions similar to those which cause contraction in vertebrate muscles.


Author(s):  
U. Aebi ◽  
P. Rew ◽  
T.-T. Sun

Various types of intermediate-sized (10-nm) filaments have been found and described in many different cell types during the past few years. Despite the differences in the chemical composition among the different types of filaments, they all yield common structural features: they are usually up to several microns long and have a diameter of 7 to 10 nm; there is evidence that they are made of several 2 to 3.5 nm wide protofilaments which are helically wound around each other; the secondary structure of the polypeptides constituting the filaments is rich in ∞-helix. However a detailed description of their structural organization is lacking to date.


Author(s):  
E. L. Thomas ◽  
S. L. Sass

In polyethylene single crystals pairs of black and white lines spaced 700-3,000Å apart, parallel to the [100] and [010] directions, have been identified as microsector boundaries. A microsector is formed when the plane of chain folding changes over a small distance within a polymer crystal. In order for the different types of folds to accommodate at the boundary between the 2 fold domains, a staggering along the chain direction and a rotation of the chains in the plane of the boundary occurs. The black-white contrast from a microsector boundary can be explained in terms of these chain rotations. We demonstrate that microsectors can terminate within the crystal and interpret the observed terminal strain contrast in terms of a screw dislocation dipole model.


Sign in / Sign up

Export Citation Format

Share Document