Persistent J-Sign Following Distalization with Correction of Patellar Height: A Descriptive study reviewing anatomic factors (195)

Objectives: The anatomic factors associated with a J-sign (patella dislocation in extension) are debated and likely multi-factorial. With trochlear shape and patella height playing a role. The goal of distalization of the tibial tubercle (dTTO) is normalization of patella height to improve patellar stabilization by earlier trochlear groove engagement. dTTO is felt to diminish or remove the J-sign by ‘by-passing’ the supra-trochlear bump, thus avoiding the need for a trochleoplasty in addition to a dTTO. The objective is to determine if a persistent J-sign after surgical patellar stabilization and adequate patellar height restoration is due to additional anatomic variances that were not surgically addressed. Methods: A retrospective chart review of 89 consecutive patients who were treated by a single surgeon for recurrent lateral patella dislocation with medial patellofemoral ligament reconstruction (MPFL-R) and dTTO was undertaken. 63 patients were identified with a pre-operative J-sign and formed the study sample. 40 of these patients had no J-sign post-operatively and 23 patients had a persistent postoperative J-sign. All patients had radiographic measurements made for patella alta (caton-deschamps index [CD]), and magnetic resonance imaging measurements of trochlear depth, sulcus angle, as well as the individual components for measuring trochlear depth (medial, central, and lateral height). Results: The average age of patients at time of surgery was 21 years old (range,13-45). Females were 74% of the population. Average BMI was 26 (17-44) and follow-up averaged 16 months. Table 1 demonstrates the between group differences for the statistically significant variables. These included trochlear depth, and lateral-central difference (via components of trochlear depth calculation) (fig 1). If the patient had lateral condylar height < medial condylar height, a J -sign persisted (4 patients). When the post op C/D >/= 1.2, 5/6 (83%) patients had a persistent j-sign. There were 5 re-dislocations in this population: 2/23 (13%) with a persistent J-sign and 3/40 (8%) without. The KOOS was available for all patients at a minimum of 3 months (Table 2). There was no statistically significant domain that demonstrated a difference between the 2 groups. In both groups, the domains with the lowest scores were quality of life, sports, and symptoms. Conclusions: Dysplastic trochlea that have a small lateral-central difference (<2mm), a shallower trochlear depth, or a lateral condylar height less than the medial condylar height, are more likely to result in a persistent J-sign. In the setting of these dysplastic trochleas, consideration should be given to address trochlear anatomy at the same time as addressing patella height normalization.In the presence of a J-sign, patella height should be normalized to CD < 1.1 to reduce the likelihood of a persistent J-Sign. Post-Op KOOS scores suggest the persistent J-sign does not impact the functional recovery in these patients. In our cohort, there was no increased risk of re-dislocation with a persistent J-Sign.

Association of patellofemoral morphology and alignment with the radiographic severity of patellofemoral osteoarthritis

Background Risk factors for the severity of patellofemoral osteoarthritis (PFOA) are poorly understood. This research aims to evaluate the association between patellofemoral joint (PFJ) morphology and alignment with the radiographic severity of PFOA. Methods A retrospective analysis of CT scan and lateral radiograph data were acquired in patients with PFOA. The radiographic grade of PFOA and tibiofemoral osteoarthritis (TFOA), lateral and medial trochlear inclination angle, sulcus angle, and the Wiberg classification of patella morphology, the congruence angle, patellar tilt angle, and lateral patellar angles, and tibial tubercle trochlear groove distance (TT-TG) and patella height (i.e., Caton-Deschamps index) were assessed using CT scans and sagittal radiographs of the knee. All the PFJ morphology and alignment data were divided into quarters, and the relationships between each of these measures and the severity of PFOA were investigated. Results By studying 150 patients with PFOA, we found a U-shaped relationship between the Caton-Deschamps index and the severity of PFOA (P < 0.001). A lower value of sulcus angle and lateral patellar angle, a higher value of congruence angle, and type III patella were associated with more severity of lateral PFOA. Compared with the highest quarter of each measure, the adjusted odds ratios (OR) of the severity of PFOA in the lowest quarter of sulcus angle, lateral patellar angle, and congruence angle; and type I patella was 8.80 (p = 0.043), 16.51 (P < 0.001), 0.04 (P < 0.001), and 0.18 (p = 0.048) respectively. Conclusions Extreme value of patella height, a higher value of lateral patellar displacement and lateral patellar tilt, lower value of sulcus angle, and type III patella were associated with more severity of PFOA.

The Effect of Aberrant Rotation on Radiographic Patellar Height Measurement Using Canton-Deschamps Index: A Cadaveric Analysis

The Caton-Deschamps Index (CDI) is a measurement used to evaluate patella alta based on true lateral radiographs; however, no prior study has investigated how altering the degree of radiograph aberrancy affects CDI measurement. The primary and secondary purpose of this study was to evaluate effects of rotational radiographic changes on patella height measurements and compare these findings to MRI measurements, respectively. Five cadaver knees (n = 5) were utilized in this study. True lateral radiographs were obtained for each specimen by using a fluoroscopic C-arm machine. The C-arm was then altered in two planes (axial and coronal) in both the clockwise and counterclockwise direction and radiographs were taken at 5, 10, and 15 degrees of error from the true lateral position. A CDI measurement of each specimen was performed based on sagittal magnetic resonance imaging (MRI) slices and compared with radiographic CDI measurements. Three orthopedic surgeons measured the CDI for each radiograph and MRI performed. Interrater reliability and changes in CDI were analyzed. Clinically significant difference in CDI was set to 0.1. Mean intraclass correlation coefficient was high (≥0.7) at true lateral and at all varying degrees of error. When performing a pairwise comparison of mean CDI from the true lateral position to increasing degrees of error, statistically significant differences were observed in the axial plane. The largest change in CDI measurements was seen with rotational malposition in the axial plane and counterclockwise direction. No statistically significant differences in mean CDI were observed in the coronal plane. The change in CDI from the true lateral position reached an absolute maximum of at least 0.1 in all four scenarios at each tested degree of error. This study found that aberrant radiographic rotation in the axial plane resulted in a significantly different mean CDI measurement when compared with true lateral radiographs. All degrees of error in both directions and in both planes could have a clinically significant effect on CDI (≥0.1). Our findings confirm the importance of a perfect true lateral radiograph when measuring patella height.

Association of Patellofemoral Morphology and Alignment With the Radiographic Severity of Patellofemoral Osteoarthritis

Background: Risk factors for the progression of patellofemoral osteoarthritis (PFOA) are poorly understood. This research aims to evaluate the association between patellofemoral joint (PFJ) morphology and alignment with the radiographic severity of PFOA.Methods: A retrospective analysis of CT scan and lateral radiograph data were acquired in patients with PFOA. The radiographic severity of PFOA and tibiofemoral OA (TFOA), lateral and medial trochlear inclination angle, sulcus angle and the Wiberg classification of patella morphology, the congruence angle, patellar tilt angle, and lateral patellar angles, and tibial tubercle trochlear groove distance (TT-TG), patella height (i.e., Caton-Deschamps index) were assessed using CT scans and sagittal radiographs of the knee. All the PFJ morphology and alignment data were divided into quarters and the relationship between each measure and the severity of PFOA was investigated.Results: By studying 150 patients with PFOA, we found a U-shaped relationship between the Caton-Deschamps index and the severity of PFOA (P <0.001). A lower value of sulcus angle and lateral patellar angle, a higher value of congruence angle, and type III patella were associated with more severity of lateral PFOA. Compared with the highest quarter of each measure, the adjusted odds ratios (OR) of the severity of PFOA in the lowest quarter of sulcus angle, lateral patellar angle, and congruence angle, and type I patella was 8.80 (p=0.043), 16.51 (P <0.001), 0.04(P <0.001), and 0.18 (p=0.048) respectively.Conclusions: Extreme value of patella height, a higher value of lateral patellar displacement and lateral patellar tilt, lower value of sulcus angle, and type III patella were associated with more severity of PFOA.

Patella Apex Influences Patellar Ligament Forces and Ratio

The relationship between three-dimensional shape and patellofemoral mechanics is complicated. The Wiberg patella classification is a method of distinguishing shape differences in the axial plane of the patella that can be used to connect shape differences to observed mechanics. This study uses a statistical shape model to relate the Wiberg patella classification to patella height and investigates its role in force distribution within the patellofemoral joint. The Wiberg Type I patella is shortest and has a more symmetrical medial and lateral facet while the Type III patella is longest with a larger lateral facet compared to medial. We generated patellofemoral morphologies from the statistical shape model and integrated them into a musculoskeletal model with a twelve degrees-of-freedom knee. We simulated an overground walking trial with these morphologies and recorded patellofemoral mechanics and ligament forces. An increase in patellar ligament force corresponded with an increase in patella height. Wiberg Type III patellas had a sharper patella apex which related to lower ratios of quadriceps tendon forces to patellar ligament forces. The change in pivot point of the patella affects the ratio of forces as well as the patellofemoral reaction force. This study provides a better understating of how patella morphology affects fundamental patella mechanics which may help identify at-risk populations for pathology development.

Influence of patella height after patella fracture on clinical outcome: a 13-year period

Introduction The incidence of patella fracture is statistically low (0.5–1.5%) compared to other fractures of the extremities [Patella fractures 76(10):987–997, 2005]. In the latter research, patella fractures if treated surgically present an overall inferior functional outcome. Little is known about the influence of the postoperative patella height on the clinical outcome. Therefore, the aim of our study was to analyse the influence of the patella height on the patients’ functional outcome after surgery. Methods In this retrospective study the in-house trauma register of our level I University trauma center was screened for patients suffering patella fractures treated surgically. Patella height of the same patients was evaluated on lateral X-rays using the Insall–Salvati Ratio (ISR). The patients’ X-rays were analyzed at two time points for the ISR, whereas group A presents ISR data right after surgery and group B data at the latest follow up (minimum 6 weeks). The change of mean ISR at both time points was tested for significance. The functional outcome was measured by the “Munich Knee Questionaire” (MKQ). These MKQ results of different patella heights and fracture types were compared. Results The screening of our in-house trauma register revealed 375 patients between the years 2003 and 2016. Out of these 54 patients (34f, 20 m) were enrolled. In detail the follow-up time for ISR between group A and B accounted for a mean of 503.8 ± 655.7 days. The MKQ was assessed at a mean of 1367.0 ± 1042.8 days after surgery. According to the AO-classification 10% AO.34 type B and 90% AO.34 type C fractures were found. Group A showed in 9.1% a patella baja and in 27.3% a patella alta compared to group B presenting 20.0% patella baja and 14.5% patella alta. There was no significant difference in functional outcome referring to the MKQ in patella alta (MKQ 69.0% ± 18.2) or baja (MKQ 67.1% ± 17.9) (p = 0.9). No significant functional difference between AO34.type B (MKQ 74.5% ± 11.0) and AO34.type C fractures (MKQ 64.0% ± 15.0) resulted (p = 0.1). Conclusion Our results demonstrate that different postoperative patella heights apparently do not influence the functional outcome in the short follow-up.

Reliability of a Caton-Deschamps-derived patella height index for knee arthroplasty

Purpose The original Caton-Deschamps index (oCDI) detects functional patella height. It cannot be used in knees with an implanted endoprosthesis. The “modified Caton-Deschamps index” (mCDI) for knee arthroplasty can miss pseudo-patella-infera (PPI), which is common after TKA. A derivate of the oCDI could be a simple analogue to the index published in 1982 using a modified tibial reference point at the anterior proximal point of the inlay, which can indirectly be located on the lateral knee radiograph. It was the aim of this study to determine the intra- and inter-rater agreement of a derived Caton-Deschamps index (dCDI) for knee arthroplasty. We hypothesized that the derived Caton-Deschamps index (dCDI) is a reliable radiological measure for patella height in knee arthroplasty. Methods Several patella height indices were measured by three independent raters in two passes. The second pass was performed after 6 weeks in random order. Intra- and inter-observer agreements were determined and analyzed using the intraclass correlation coefficient (ICC). For radiographic evaluation, digital lateral radiographs of 150 knees before and after primary TKA were used. Results We found high interrater reliability for all analyzed indices. We found the highest agreements for the ISI preop (ICC = 0.914) and postop (ICC = 0.920), respectively. We also found very good intra-rater reliability for the CDI (ICCpreop = 0.954), dCDI (ICCpostop = 0.945), ISI (ICCpreop = 0.960; ICCpostop=0.940) and BPI (ICCpreop = 0.969; ICCpostop = 0.955). Fourteen cases (9.3%) with insignificant PPI were found. Conclusion The derived Caton-Deschamps index (dCDI) can easily be used in knee arthroplasty and demonstrated high intra- and interrater agreement, which was similar to other commonly used and established patella height indices.