Establishment of neutron dose calibration fields based on a ²⁵²Cf source by Monte-Carlo method

This paper presents calculation results based on Monte-Carlo method to select an appropriate neutron moderator and design four configurations for a 252Cf irradiation system. These configurations provide six neutron spectra with the various average energies (1.04 MeV, 1.38 MeV, 1.69 MeV, 2.05 MeV, 2.46 MeV and 2.93 MeV) suitable for the calibration of neutron survey meters and personal dosimeters.

P13.21 PET-based dose painting radiation therapy strategy in a glioblastoma rat model using the small animal radiation research platform

BACKGROUND Previously, a rat glioblastoma model to mimic chemo-radiation treatment of human glioblastoma in the clinic was established. Similarly to the clinic, CT and MRI were combined during the treatment planning process. PET imaging was subsequently added which allowed us to implement sub-volume boosting using a micro-irradiation system. However, combining three imaging modalities (CT, MRI and PET) using a micro-irradiation system, proved to be labour intensive because multimodal imaging, treatment planning and dose delivery have to be completed sequentially in the preclinical setting. MATERIAL AND METHODS Two different methodologies were compared in silico for performing preclinical [18F]FET PET based radiation therapy (20 Gy based on MRI, 8 Gy boost based on PET) based on three different cases. Method 1 is based on the previously published methods1,2. However, the process is automated using an in-house developed MATLAB code. Method 2 consists of a more sophisticated method where a series of isocenters and jaw dimensions for the motorised variable collimator were determined based on the [18F]FET PET uptake. Both methods were evaluated by means of the dose volume histograms (DVH) and Q-volume histograms. RESULTS The setup parameters for both methods were calculated. The DVHs for method 2 are systematically closer to the ideal dose distribution compared to method 1. These findings are confirmed by the D90 and D50 values which are considerably lower for method 1. When observing the Q-factor, method 2 always results in dose distributions that are closer to the dose objectives (method 1: 0.141±0.046; method 2: 0.064±0.011). CONCLUSION The described novel method to optimize the preclinical treatment planning process has many advantages in terms of dose delivery, time efficiency and variability, when compared to the previously used methods1,2. These improvements are important to narrow the gap between clinical and preclinical radiation research and for the development of new therapeutics and/or radiation therapy procedures for glioblastoma. 1. Bolcaen, J., Descamps, B., Boterberg, T., Vanhove, C. & Goethals, I. PET and MRI Guided Irradiation of a Glioblastoma Rat Model Using a Micro-irradiator. J. Vis. Exp. 1–10 (2017) doi:10.3791/56601. 2. Verhoeven, J. et al. Technical feasibility of [18F]FET and [18F]FAZA PET guided radiotherapy in a F98 glioblastoma rat model. Radiat. Oncol. 14, (2019).

Inactivating SARS-CoV-2 Using 275 nm UV-C LEDs through a Spherical Irradiation Box: Design, Characterization and Validation

We report on the design, characterization and validation of a spherical irradiation system for inactivating SARS-CoV-2, based on UV-C 275 nm LEDs. The system is designed to maximize irradiation intensity and uniformity and can be used for irradiating a volume of 18 L. To this aim: (i) several commercially available LEDs have been acquired and analyzed; (ii) a complete optical study has been carried out in order to optimize the efficacy of the system; (iii) the resulting prototype has been characterized optically and tested for the inactivation of SARS-CoV-2 for different exposure times, doses and surface types; (iv) the result achieved and the efficacy of the prototype have been compared with similar devices based on different technologies. Results indicate that a 99.9% inactivation can be reached after 1 min of treatment with a dose of 83.1 J/m2.