Constructing a method for assessing the effectiveness of using protective barriers near highways to decrease the level of air pollution

Highways are an intensive source of environmental pollution. Atmospheric air is exposed to the fastest anthropogenic influence. Therefore, a particularly important task is to minimize the level of air pollution near the highway. An effective method for solving this problem is the use of protective barriers of various shapes installed near highways. At the stage of designing these protective structures, an important task arises to assess their effectiveness. Estimation of the effectiveness of protective barriers by the method of the physical experiment takes considerable time to set up and conduct an experiment, as well as analyze the results of physical modeling. This method is not always convenient during design work. An alternative method is the method of mathematical modeling. For the designer, it is very important to have mathematical models that make it possible to quickly obtain a predictive result and take into consideration a set of important factors on which the effectiveness of the protective barrier depends. A method has been devised that makes it possible to assess the effectiveness of using protective barriers to reduce the level of air pollution near the highway. It was found that an increase in barrier height by 80 % leads to a 22 % decrease in the concentration of impurities behind the barrier. It was established that applying a barrier with a height of 1.5 m leads to a 26 % decrease in the concentration of impurities in buildings adjacent to the highway. A method has been devised to assess the effectiveness of using absorbent "TX Active" surfaces on the protective barrier located near the highway. This study's result revealed that the application of a barrier with one "TX Active" surface leads to a decrease in the concentration of NO behind the barrier by an average of 43 %. When using a barrier with two "TX Active" surfaces, a decrease in the NO concentration behind the barrier is 85 % on average

Cranioplasty

Calvarial defects are commonly encountered after neurosurgical procedures, trauma, and ablative procedures of advanced head neck cancers. The goals of cranioplasty are to provide a protective barrier for the intracranial contents, to restore form, and prevent syndrome of the trephined. Autologous and alloplastic techniques are available, each with their advantages and drawbacks. A multitude of materials are available for cranioplasty, and proper timing of reconstruction with attention to the overlying skin envelope is important in minimizing complications.

Investigations of the Rockfall Impacts on the Flexible Protective Barriers under Seismic Loading

Rockfall triggered by earthquakes can cause severe infrastructure losses and even fatalities. The flexible protective barrier is an efficient rockfall protection system that has been widely used against rockfall. This studyproposed a novel approach to simulate a field test of rockfall impacting the flexible barrier, and the simulation results showed an excellent match with the field test results. Based on this approach, the seismic loading was applied to the numerical model, and four types of seismic loading were adopted, e.g., non-seismic, x-directional seismic, y-directional seismic, and z-directional seismic. This study aims at investigating the dynamic behavior of the flexible protective barrier under different seismic loading during the rockfall impact process. The following findings can be obtained from the simulation results. First of all, the seismic loading can increase the maximum elongation and decrease the final elongation of the flexible protective barrier comparing to non-seismic loading. Second, the largest deformation area of the protective barrier is at the diagonal position when x-directional seismic loading was applied, which is at the vertical bisector position when y-directional and z-directional seismic loading was applied. Third, the maximum elongation of the protective barrier decreased with the increasing seismic wave period. But in general, the amplitude and period of seismic waves have negligible effects on the elongation, maximum normal stress, and maximum shear stress of the flexible protective barrier.

THE GROWING DEVASTATION IN INDIA BY BLACK, WHITE, AND YELLOW FUNGI

Fungus-caused illnesses are widespread in plants, but owing to the protective barrier given by the immune system of living creatures, fungal infection is uncommon in humans and animals. Notwithstanding, for the most part in current circumstance, when the destructive Coronavirus contamination has undermined the insusceptible capacity, the apparently innocuous parasitic gathering makes a move to assault the human body, which might be serious. The contagious microbe penetrates the human body by means of wounds or through the respiratory framework. The human body is inltrated by the fungal infection through injuries or the respiratory system. Therefore, when it penetrates bodily tissue, it sucks it up for nourishment and resists the immunological impediment. The globe is presently actively ghting the new Covid; Out of nowhere, another rush of tiny invaders known as black, white, and yellow contagious diseases has inicted damage on the all-around tough epidemic.

Design an Epoxy Coating with TiO2/GO/PANI Nanocomposites for Enhancing Corrosion Resistance of Q235 Carbon Steel

In this work, a ternary TiO2/Graphene oxide/Polyaniline (TiO2/GO/PANI) nanocomposite was synthesized by in situ oxidation and use as a filler on epoxy resin (TiO2/GO/PANI/EP), a bifunctional in situ protective coating has been developed and reinforced the Q235 carbon steel protection against corrosion. The structure and optical properties of the obtained composites are characterized by XRD, FTIR, and UV–vis. Compared to bare TiO2 and bare Q235, the TiO2/GO/PANI/EP coating exhibited prominent photoelectrochemical properties, such as the photocurrent density increased 0.06 A/cm2 and the corrosion potential shifted from −651 mV to −851 mV, respectively. The results show that the TiO2/GO/PANI nanocomposite has an extended light absorption range and the effective separation of electron-hole pairs improves the photoelectrochemical performance, and also provides cathodic protection to Q235 steel under dark conditions. The TiO2/GO/PANI/EP coating can isolate the Q235 steel from the external corrosive environment, and may generally be regarded a useful protective barrier coating to metallic materials. When the TiO2/GO/PANI composite is dispersed in the EP, the compactness of the coating is improved and the protective barrier effect is enhanced.