Fabrication of Implantable Capsule-Type Channel Sounders for the High-Accuracy Measurement of the Signal Loss of Out-Body to In-Body Channels

This paper proposes a channel sounder to measure the channel properties of an implantable device that transmits data from inside to outside the human body. The proposed channel sounder measures the receiving power of a signal transmitted from outside the human body. The channel sounder is equipped with a Bluetooth module that enables the wireless transmission of the receiving power outside the human body. Wireless transmission enables the channel measurement by isolating the transmitter and receiver inside the channel sounder. Using the proposed channel sounder, the channel properties can be measured without any interference between the transmitter and the receiver.

Comparison of GNSS and INSAT-3D sounder retrieved precipitable water vapour and validation with the GPS Sonde data over Indian Subcontinent

Precipitable water vapour (PWV) plays a key role in the atmospheric processes from climate change to micrometeorology. Its distribution and quantity are critical for the description of state and evaluation of the atmosphere in NWP model. Lack of precise and continuous water vapour data is one of the major error sources in short term forecast of precipitation. The task of accurately measuring atmospheric water vapour is challenging. Conventional in situ measurements of atmospheric water vapour is provided by GPS Sonde humidity sensors profile twice a day at 0000 and 1200 UTC mainly from limited land regions. In recent years India Meteorological Department (IMD) is computing PWV from 19 channel sounder of INSAT-3D in three layers 1000-900 hPa, 900-700 hPa and 700-300 hPa and total PWV in the vertical column of atmosphere stretching from surface to about 100 hPa under cloud free condition. These data most commonly were validated using spatially and temporally collocated GPS Sonde measurements. In this paper, INSAT-3D satellite retrieved PWV data are validated with column integrated PWV estimates from a network of ground based Global Navigation Satellite System (GNSS) over Indian subcontinent. The PWV retrieved by INSAT-3D sounder platform is very promising, being in a good agreement with the GNSS data recorded over India for the period June, 2017 to May, 2018. The root-mean-square (rms) differences of 5.4 to 7.1 mm, bias of -4.7 to +2.1 mm and correlations coefficient of 0.79 to 0.92 was observed between INSAT-3D and GNSS PWV. The correlations coefficient between GPS Sonde and GNSS derived PWV ranges from 0.85 to 0.98.

A Wideband Radio Channel Sounder for Non-Stationary Channels: Design, Implementation and Testing

The increasing bandwidths and frequencies proposed for new mobile communications give rise to new challenges for system designers. Channel sounding and channel characterization are important tasks to provide useful information for the design of systems, protocols, and techniques to fight the propagation impairments. In this paper, we present a novel radio channel sounder capable of dealing with non-stationary channels. It can be operated in real-time and has a compact size to ease transport. For versatility and cost purposes, the core of the system is implemented in Field Programmable Gate Arrays (FPGAs). Three measurement campaigns have been conducted to illustrate the performance of the sounder in both static and non-static channels. In its current configuration, the sounder reaches an RF null-to-null bandwidth of 1 GHz, providing a delay resolution of 2 ns, a maximum measurable Doppler shift of 7.63 kHz, and 4.29 s of continuous acquisition time. A comparison with other channel sounders in the literature reveals that our proposal achieves a good combination of performance, cost, and size.

Directive mmWave radio channel modeling in a ship hull

Wireless connectivity has been realized for multiple environments and different frequency bands. However, little research exists about mmWave communication in industrial environments. This paper presents the 60 GHz double-directional radio channel for mmWave communication in a ship hull for Line-of-Sight (LOS) and non-Line-of-Sight (NLOS) conditions. We performed channel measurements using the Terragraph channel sounder at different locations in the ship hull and fitted LOS path loss to a one-slope path loss model. Path loss and root-mean-square delay spread of the LOS path is compared to the reflected path with lowest path loss. NLOS communication via this first-order reflected path is modeled by calculating the path distance and determining the reflection loss. The reflection losses have a considerable contribution to the signal attenuation of the reflected path. The channel models are implemented in an indoor coverage prediction tool, which was extended with a ray launching algorithm and validated by comparison with an analytical electromagnetic solver. The results show that the mmWave radio channel allows high-throughput communication within a ship hull compartment, even when no LOS path between the transmitter and receiver is present.