scholarly journals Directive mmWave radio channel modeling in a ship hull

2021 ◽  
pp. 1-12
Author(s):  
Brecht De Beelde ◽  
Andrés Almarcha Lopéz ◽  
David Plets ◽  
Marwan Yusuf ◽  
Emmeric Tanghe ◽  
...  
Keyword(s):  
Radio Channel ◽  
Path Loss ◽  
Channel Modeling ◽  
Ship Hull ◽  
Line Of Sight ◽  
Delay Spread ◽  
60 Ghz ◽  
Channel Measurements ◽  
Channel Sounder ◽  
Path Distance

Abstract Wireless connectivity has been realized for multiple environments and different frequency bands. However, little research exists about mmWave communication in industrial environments. This paper presents the 60 GHz double-directional radio channel for mmWave communication in a ship hull for Line-of-Sight (LOS) and non-Line-of-Sight (NLOS) conditions. We performed channel measurements using the Terragraph channel sounder at different locations in the ship hull and fitted LOS path loss to a one-slope path loss model. Path loss and root-mean-square delay spread of the LOS path is compared to the reflected path with lowest path loss. NLOS communication via this first-order reflected path is modeled by calculating the path distance and determining the reflection loss. The reflection losses have a considerable contribution to the signal attenuation of the reflected path. The channel models are implemented in an indoor coverage prediction tool, which was extended with a ray launching algorithm and validated by comparison with an analytical electromagnetic solver. The results show that the mmWave radio channel allows high-throughput communication within a ship hull compartment, even when no LOS path between the transmitter and receiver is present.

scholarly journals Wideband Channel Characterization for 6G Networks in Industrial Environments

Sensors ◽  
2021 ◽  
Vol 21 (6) ◽  
pp. 2015
Author(s):  
Ahmed Al-Saman ◽  
Marshed Mohamed ◽  
Michael Cheffena ◽  
Arild Moldsvor
Keyword(s):  
Radio Channel ◽  
Path Loss ◽  
Data Rate ◽  
Delay Spread ◽  
Channel Measurements ◽  
Data Traffic ◽  
Dispersion Parameters ◽  
Time Dispersion ◽  
K Factor ◽  
Industrial Environments

Wireless data traffic has increased significantly due to the rapid growth of smart terminals and evolving real-time technologies. With the dramatic growth of data traffic, the existing cellular networks including Fifth-Generation (5G) networks cannot fully meet the increasingly rising data rate requirements. The Sixth-Generation (6G) mobile network is expected to achieve the high data rate requirements of new transmission technologies and spectrum. This paper presents the radio channel measurements to study the channel characteristics of 6G networks in the 107–109 GHz band in three different industrial environments. The path loss, K-factor, and time dispersion parameters are investigated. Two popular path loss models for indoor environments, the close-in free space reference distance (CI) and floating intercept (FI), are used to examine the path loss. The mean excess delay (MED) and root mean squared delay spread (RMSDS) are used to investigate the time dispersion of the channel. The path loss results show that the CI and FI models fit the measured data well in all industrial settings with a path loss exponent (PLE) of 1.6–2. The results of the K-factor show that the high value in industrial environments at the sub-6 GHz band still holds well in our measured environments at a high frequency band above 100 GHz. For the time dispersion parameters, it is found that most of the received signal energy falls in the early delay bins. This work represents a first step to establish the feasibility of using 6G networks operating above 100 GHz for industrial applications.

scholarly journals Radio Channel Modelling in a Ship Hull: Path Loss at 868 MHz, 2.4 GHz, 5.25 GHz and 60 GHz

2021 ◽  
pp. 1-1
Author(s):  
Brecht Debeelde ◽  
Emmeric Tanghe ◽  
Marwan Yusuf ◽  
David Plets ◽  
Wout Joseph
Keyword(s):  
Radio Channel ◽  
Path Loss ◽  
Ship Hull ◽  
60 Ghz ◽  
Channel Modelling

scholarly journals Channel Measurements and Modeling at 6 GHz in the Tunnel Environments for 5G Wireless Systems

2017 ◽  
Vol 2017 ◽  
pp. 1-15 ◽  
Author(s):  
Shuang-de Li ◽  
Yuan-jian Liu ◽  
Le-ke Lin ◽  
Zhong Sheng ◽  
Xiang-chen Sun ◽  
...  
Keyword(s):  
Path Loss ◽  
Measured Data ◽  
Line Of Sight ◽  
Delay Spread ◽  
Channel Measurements ◽  
Angle Of Arrival ◽  
Rms Delay Spread ◽  
K Factor ◽  
Reference Distance ◽  
Loss Models

Propagation measurements of wireless channels performed in the tunnel environments at 6 GHz are presented in this paper. Propagation characteristics are simulated and analyzed based on the method of shooting and bouncing ray tracing/image (SBR/IM). A good agreement is achieved between the measured results and simulated results, so the correctness of SBR/IM method has been validated. The measured results and simulated results are analyzed in terms of path loss models, received power, root mean square (RMS) delay spread, Ricean K-factor, and angle of arrival (AOA). The omnidirectional path loss models are characterized based on close-in (CI) free-space reference distance model and the alpha-beta-gamma (ABG) model. Path loss exponents (PLEs) are 1.50–1.74 in line-of-sight (LOS) scenarios and 2.18–2.20 in non-line-of-sight (NLOS) scenarios. Results show that CI model with the reference distance of 1 m provides more accuracy and stability in tunnel scenarios. The RMS delay spread values vary between 2.77 ns and 18.76 ns. Specially, the Poisson distribution best fits the measured data of RMS delay spreads for LOS scenarios and the Gaussian distribution best fits the measured data of RMS delay spreads for NLOS scenarios. Moreover, the normal distribution provides good fits to the Ricean K-factor. The analysis of the abovementioned results from channel measurements and simulations may be utilized for the design of wireless communications of future 5G radio systems at 6 GHz.

scholarly journals Office Room Channel Modeling and Object Attenuation at Sub-THz Frequencies

Electronics ◽  
2021 ◽  
Vol 10 (14) ◽  
pp. 1725
Author(s):  
Brecht De Beelde ◽  
Emmeric Tanghe ◽  
Claude Desset ◽  
André Bourdoux ◽  
David Plets ◽  
...  
Keyword(s):  
Wireless Communication ◽  
High Throughput ◽  
Communication Systems ◽  
Path Loss ◽  
Channel Modeling ◽  
Single Frequency ◽  
Line Of Sight ◽  
Channel Measurements ◽  
V Band ◽  
Computer Mouse

Large bandwidths are needed to meet the high-throughput requirements of future wireless communication systems. These larger bandwidths are available at mmWave and sub-THz frequencies, such as the V-band ranging from 50 to 75 GHz and the D-band ranging from 110 to 170 GHz. In this paper, we present channel measurements in an office environment, covering the full D-band. Line-of-Sight (LOS) path loss (PL) is modeled as a function of frequency and distance. Both a single-frequency floating-intercept and multi-frequency alpha-beta-gamma model provide a good fit to the measured LOS PL data. Attenuation due to blockage of the LOS path by various desk objects, such as computer peripherals and cables, is determined, as well as attenuation due to plant obstructions. Attenuation due to an obstructed LOS path ranges from 3 dB for a single universal serial bus (USB) cable, and up to 25 dB for a laptop power supply, computer mouse, computer monitor, or plant. Because of a higher diffraction angle, the measured attenuation is higher when the distance between the antennas decreases. We measure diffraction around a computer monitor for dual polarization and verify whether communication via the reflected non Line-of-Sight path makes high-throughput wireless communication possible when the LOS path is blocked.

The 5-GHz Airport Surface Area Channel—Part I: Measurement and Modeling Results for Large Airports

2008 ◽  
Vol 57 (4) ◽  
pp. 2014-2026 ◽  
Author(s):  
David W. Matolak ◽  
Indranil Sen ◽  
Wenhui Xiong
Keyword(s):  
Path Loss ◽  
Correlation Coefficients ◽  
Line Of Sight ◽  
Delay Spread ◽  
Rms Delay Spread ◽  
Amplitude Data ◽  
Amplitude Correlation ◽  
5 Ghz ◽  
Best Fit ◽  
Probability Density Function Pdf

We describe results from a channel measurement and modeling campaign for the airport surface environment in the 5-GHz band. Using a 50-MHz bandwidth test signal, thousands of power delay profiles (PDPs) were obtained and processed to develop empirical tapped-delay line statistical channel models for large airports. A log-distance path loss model was also developed. The large airport surface channel is classified into three propagation regions, and models are presented for each of the regions for two values of bandwidth. Values of the median root-mean-square (RMS) delay spread range from 500 to 1000 ns for these airports, with the 90 th percentile RMS delay spreads being approximately 1.7 ms. Corresponding correlation bandwidths (i.e., correlation value 1/2) range from approximately 1.5 MHz in non-line-of-sight (NLOS) settings to 17.5 MHz in line-of-sight (LOS) settings. Two types of statistical nonstationarity were also observed: 1) multipath component persistence and 2) propagation region transitions. We provide the multipath component probability of occurrence models and describe Markov chains that are used for modeling both phenomena. Channel tap amplitude statistics are also provided, using the flexible Weibull probability density function (pdf). This pdf was found to best fit fading tap amplitude data, particularly for frequently observed severe fading, which is characterized by fade probabilities that are worse than the commonly used Rayleigh model. Fading parameters equivalent to Nakagami-m-model values ofmnear 0.7 were often observed (withm= 1 being Rayleigh and m < 1 being worse than Rayleigh). We also provide channel tap amplitude correlation coefficients, which typically range from 0.1 to 0.4 but occasionally take values greater than 0.7.

scholarly journals NLOS Path Loss Model for Low-Height Antenna Links in High-Rise Urban Street Grid Environments

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Juyul Lee ◽  
Myung-Don Kim ◽  
Hyun Kyu Chung ◽  
Jinup Kim
Keyword(s):  
Path Loss ◽  
Field Measurements ◽  
Propagation Path ◽  
Delay Spread ◽  
Communication Link ◽  
Channel Measurements ◽  
Loss Model ◽  
Path Loss Model ◽  
Power Delay Profile ◽  
High Rise

This paper presents a NLOS (non-line-of-sight) path loss model for low-height antenna links in rectangular street grids to account for typical D2D (device-to-device) communication link situations in high-rise urban outdoor environments. From wideband propagation channel measurements collected in Seoul City at 3.7 GHz, we observed distinctive power delay profile behaviors between 1-Turn and 2-Turn NLOS links: the 2-Turn NLOS has a wider delay spread. This can be explained by employing the idea that the 2-Turn NLOS has multiple propagation paths along the various street roads from TX to RX, whereas the 1-Turn NLOS has a single dominant propagation path from TX to RX. Considering this, we develop a path loss model encompassing 1-Turn and 2-Turn NLOS links with separate scattering and diffraction parameters for the first and the second corners, based on the Uniform Geometrical Theory of Diffraction. In addition, we consider the effect of building heights on path loss by incorporating an adjustable “waveguide effect” parameter; that is, higher building alleys provide better propagation environments. When compared with field measurements, the predictions are in agreement.

scholarly journals High Throughput Line-of-Sight MIMO Systems for Next Generation Backhaul Applications

Frequenz ◽  
2017 ◽  
Vol 71 (9-10) ◽  
pp. 389-398
Author(s):  
Xiaohang Song ◽  
Darko Cvetkovski ◽  
Tim Hälsig ◽  
Wolfgang Rave ◽  
Gerhard Fettweis ◽  
...  
Keyword(s):  
High Throughput ◽  
Mimo Systems ◽  
Next Generation Networks ◽  
Line Of Sight ◽  
60 Ghz ◽  
Channel Measurements ◽  
Next Generation ◽  
Wireless Backhaul ◽  
Baseband Processing ◽  
Theoretical Foundations

Abstract The evolution to ultra-dense next generation networks requires a massive increase in throughput and deployment flexibility. Therefore, novel wireless backhaul solutions that can support these demands are needed. In this work we present an approach for a millimeter wave line-of-sight MIMO backhaul design, targeting transmission rates in the order of 100 Gbit/s. We provide theoretical foundations for the concept showcasing its potential, which are confirmed through channel measurements. Furthermore, we provide insights into the system design with respect to antenna array setup, baseband processing, synchronization, and channel equalization. Implementation in a 60 GHz demonstrator setup proves the feasibility of the system concept for high throughput backhauling in next generation networks.

scholarly journals Propagation Path Loss Modeling and Outdoor Coverage Measurements Review in Millimeter Wave Bands for 5G Cellular Communications

2018 ◽  
Vol 8 (4) ◽  
pp. 2254 ◽  
Author(s):  
Mohammed B. Majed ◽  
Tharek A. Rahman ◽  
Omar Abdul Aziz
Keyword(s):  
Communication Networks ◽  
Millimeter Wave ◽  
Wide Spectrum ◽  
Path Loss ◽  
Separation Distance ◽  
Propagation Path ◽  
Delay Spread ◽  
Propagation Time ◽  
60 Ghz ◽  
Rms Delay Spread

The global bandwidth inadequacy facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks, and mmWave band is one of the promising candidates due to wide spectrum. This paper presents propagation path loss and outdoor coverage and link budget measurements for frequencies above 6 GHz (mm-wave bands) using directional horn antennas at the transmitter and omnidirectional antennas at the receiver. This work presents measurements showing the propagation time delay spread and path loss as a function of separation distance for different frequencies and antenna pointing angles for many types of real-world environments. The data presented here show that at 28 GHz, 38 GHz and 60 GHz, unobstructed Line of Site (LOS) channels obey free space propagation path loss while non-LOS (NLOS) channels have large multipath delay spreads and can utilize many different pointing angles to provide propagation links. At 60 GHz, there is more path loss and smaller delay spreads. Power delay profiles PDPs were measured at every individual pointing angle for each TX and RX location, and integrating each of the PDPs to obtain received power as a function of pointing angle. The result shows that the mean RMS delay spread varies between 7.2 ns and 74.4 ns for 60 GHz and 28 GHz respectively in NLOS scenario.

scholarly journals Wideband and Ultrawideband Channel Models in Working Machine Environment

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Attaphongse Taparugssanagorn ◽  
Matti Hämäläinen ◽  
Jari Iinatti
Keyword(s):  
Exponential Decay ◽  
Radio Channel ◽  
Line Of Sight ◽  
Small Scale ◽  
Delay Spread ◽  
Confined Space ◽  
Rms Delay Spread ◽  
Decay Profile ◽  
Cabin Environment ◽  
Uwb Radio

We present statistical models for wideband and ultrawideband (UWB) radio channels in a working machine cabin environment. Based on a set of measurements, it was found that such a small and confined space causes mostly diffuse multipath scattering rather than specular paths. The amplitude of the channel impulse responses in the wideband case is mostly Rayleigh distributed small-scale fading signal, with only a few paths exhibiting Ricean distributions, whereas the ones in the UWB case tend to be log-normally distributed. For the path amplitude, we suggest an exponential decay profile, which has a constant slope in dB scale, with the corresponding parameters for the UWB case. For the wideband case, a twofold exponential decay profile provides excellent fits to the measured data. It was also noted that the root-mean-square (RMS) delay spread is independent of the line-of-sight/obstructed line-of-sight situations of the channel. The multipath components contributing significant energy play a major role in such a small environment if compared to the direct path. In addition, the radio channel gains are attenuated with the presence of a driver inside the cabin.

Sign in / Sign up

Export Citation Format

Share Document