Modeling of a Mobile Spatial Cable Robot With Flexible Cables and Investigating the Effect of Its Nonlinear Vibrations on the System Dynamics

In this paper the modeling of a novel moving cable robot is conducted considering the vibration of the cables in its nonlinear format. The robot has 6 DOFs while the controlling input number is 12. Considering the fact that the elasticity of the cables is coupled with the dynamic model of the system, their vibration effects on the robot performance and accuracy. The target of this paper is to model the robot considering the cables’ elasticity and study its effect on the robot performance. This study can be considered in designing the controller of tower cranes and decrease the swing of the cables and increasing their stability. In order to cover the mentioned aim, the continuous vibration of the cables are modeled as a nonlinear system and it is added to the moving platform dynamics. Moreover the differences between the nonlinear modeling of the cables’ vibration and estimating them as a linear system is studied and their related results are compared and analyzed. The correctness of modeling is shown by comparing the results with previous research and the superiority of modeling the cables’ vibration in its nonlinear format is verified by the aid of a series of simulation scenarios in MATLAB. Moreover, by conducting some experimental test on the manufactured moving cable robot of IUST, it is illustrated that, modeling the cables in these robots as a nonlinear system results in more accurate results. It is shown that not only considering the cables’ vibration is significant in analyzing the robot dynamic, but also it is shown that promoting the mentioned model into nonlinear one increase the accuracy of the robot modeling which sequentially can provide a stronger controller for stabilizing and controlling the end-effector within a predefined trajectory.

Parallel structure mechanisms with flexible connections

An overview of designs of parallel structure mechanisms with flexible connections is presented. It is proposed to classify the parallel structure mechanisms, taking into account the following qualification characteristics: type of drive, type of movements performed, with further classification of the mechanisms of each group according to their other distinctive features. Keywords: parallel structure mechanism, flexible connections, cable robot, controlled deformation, degree of freedom. [email protected]

Experimental Investigation of a Cable Robot Recovery Strategy

Developing an emergency procedure for cable-driven parallel robots is not a trivial process, since it is not possible to halt the end-effector by quickly braking the actuators as in rigid-link manipulators. For this reason, the cable robot recovery strategy is an important topic of research, and the literature provides several approaches. However, the computational efficiency of the recovery algorithm is fundamental for real-time applications. Thus, this paper presents a recovery strategy adopted in an experimental setup consisting of a three degrees-of-freedom (3-DOF) suspended cable robot controlled by an industrial PC. The presentation of the used control system lists the industrial-grade components installed, further highlighting the industrial implication of the work. Lastly, the experimental validation of the recovery strategy proves the effectiveness of the work.

Improving a Cable Robot Recovery Strategy by Actuator Dynamics

Cable-driven parallel robots offer several benefits in terms of workspace size and design cost with respect to rigid-link manipulators. However, implementing an emergency procedure for these manipulators is not trivial, since stopping the actuators abruptly does not imply that the end-effector rests at a stable position. This paper improves a previous recovery strategy by introducing the physics of the actuators, i.e., torque limits, inertia, and friction. Such features deeply affect the reachable acceleration during the recovery trajectory. The strategy has been applied to a simulated point-mass suspended cable robot with three translational degrees of freedom to prove its effectiveness and feasibility. The acceleration limits during the recovery phase were compared with the ones obtained with the previous method, thus confirming the necessity of contemplating the properties of the actuators. The proposed strategy can be implemented in a real-time environment, which makes it suitable for immediate application to an industrial environment.