heavy metals adsorption
Recently Published Documents


TOTAL DOCUMENTS

54
(FIVE YEARS 21)

H-INDEX

14
(FIVE YEARS 5)

2021 ◽  
pp. 100382
Author(s):  
Marzia Sultana ◽  
Mahbub Hasan Rownok ◽  
Meherunnesa Sabrin ◽  
Md Hafezur Rahaman ◽  
S.M.Nur Alam

Author(s):  
R.A Apakashev ◽  
◽  
N.G Valiev ◽  
A.I. Usmanov ◽  
M.S. Labzin ◽  
...  

The article provides research on testing natural sorbents based on peat, diatomite and vermiculite during the adsorption of heavy metal ions (Pb, As, Cr, Cr6+, Cr3+, Cu). The following series of sorbents has been formed according to the efficiency of adsorption of heavy metal ions from aqueous solutions of salts: peat - granular diatomite> coarse vermicu-lite> medium fraction vermiculite> peat - non-granular diatomite> diatomite. Key words: natural sorbents, ameliorants, disturbed lands, heavy metals, adsorption, recultivation, bioremediation.


2020 ◽  
Vol 4 (1) ◽  
pp. 08-10
Author(s):  
Nurhaliza Said Mohd ◽  
Rabiatul Manisah Mohamed

Accumulation of heavy metals in water is of particularly important because it can impact upon human health through possible contamination of food. The use of banana peel was investigated. Hydrothermal carbonization (HTC) was chosen as alternative process. The objective of this project is to synthesize banana peel hydrochars adsorbent via HTC process and to evaluate the heavy metals adsorption performance of banana peel hydrochars adsorbent. Conventional methods in removal of heavy metals require high operational cost, need highly skilled labour, and generate sludge at the end of the operation. Compared to other techniques, banana peel absorbent is a cost- effective adsorbent, easy to operate, environmentally safe and no health risk for the operator. Besides, large quantity of banana peel waste contributes to its significant disposal problem. Thus, this study is expected to solve problems of banana peel, by preparing banana peel adsorbent through hydrothermal carbonization. There are three phases in this project, phase 1 which is synthesis of banana peel based on hydrochars, banana peel was chopped the peels into small pieces. It was then soaked in KOH solution for 2hours and transferred into PTFE and heat for 2hours at 230°C. For phase 2, physico-chemical characterization of banana peels hydrochars by using FTIR. The result obtained shown that all of the content in banana peels will activate the surface of banana peel to enhance the adsorption of the heavy metals. For the final phase, by using AAS, the initial and final concentration of the metals was tested to determine the removal of heavy metals by the prepared hydrochars. The results showed that the removal capacity of the hydrochars increased when the initial concentration of the metals increased. From the research, it can be concluded that, as the initial concentration of the metals higher, the ability of the hydrochars to remove the metals also higher and stronger.


2020 ◽  
Vol 9 (6) ◽  
pp. 12244-12259 ◽  
Author(s):  
Reza Eivazzadeh-Keihan ◽  
Fateme Radinekiyan ◽  
Somayeh Asgharnasl ◽  
Ali Maleki ◽  
Hossein Bahreinizad

Sign in / Sign up

Export Citation Format

Share Document