Perencanaan Desain TapakObyekWisataAlam Di KPH Unit XII LadongiKabupaten Kolaka Timur

Perencanaan tapak yang baik sangat perlukan untuk menciptakan kawasan hutan dapat terus lestari. Tujuan dari penelitian ini yaitu (1) menganalisis potensi obyek wisata alam di KPH Unit XII Ladongi; dan (2) membuat rencana desain tapak obyek wisata alam di KPH Unit XII Ladongi. Metode yang digunakan yaitu (1) kualitas biofisik kawasan, (2) analisis spasial yang mengacu pada Peraturan Menteri Lingkungan Hidup Dan Kehutanan Republik Indonesia Nomor P.31/MenLHK/Setjen/Kum.1/3/2016 dan Peraturan Direktur Jenderal Pengelolaan Hutan Produksi Lestari Nomor: P.4/PHPL/SET/4/2017.Hasil dari penelitian ini yaitu (1) potensi obyek wisata alam diantaranya puncak Lalingato, sungai Simbune, sungai Loea, sungai Ladongi, sungai Andowengga dan air jatuh Taore. Kesesuaian biofisik kawasan masuk dalam kategori sesuai dan sangat sesuai untuk dijadikan sebagai obyek wisata alam, (2) Adanya pembagianruangpublik dan ruangusaha pada obyek dan dayatarikwisataalam wilayah KPH Ladongi. Kata Kunci : Desain Tapak, WisataAlam, LadongiGood site planning is very necessary to create sustainable forest areas. The aims of this research are (1) to analyze the potential of natural tourism objects in KPH Unit XII Ladongi; and (2) make a site design plan for natural tourism objects in KPH Unit XII Ladongi. The methods used are (1) the biophysical quality of the area, (2) spatial analysis which refers to the Regulation of the Minister of Environment and Forestry of the Republic of Indonesia Number P.31/MenLHK/Setjen/Kum.1/3/2016 and the Regulation of the Director General of Production Forest Management. Lestari Number: P.4/PHPL/SET/4/2017.. The results of this study are (1) the potential for natural tourism objects including the Lalingato peak, Simbune river, Loea river, Ladongi river, Andowengga river and Taore waterfall. The biophysical suitability of the area is included in the appropriate category and is very suitable to be used as a natural tourism object, (2) There is a division of public space and business space on objects and natural tourist attractions in the Ladongi KPH area.Keywords: Site Design, Nature Tourism, Ladongi

RADIATION SHIELDING AND DOSE ASSESSMENT OF THE CYCLOTRON FACILITY AT INRNE-BAS

The Institute for Nuclear Research and Nuclear Energy at the Bulgarian Academy of Sciences is working on the construction of a cyclotron centre. The facility is on a design level. At this stage of the project, an important task is the radiation shielding assessment of the facility. Nowadays, the Monte Carlo transport codes have become the tool of choice for solving this type of problem. In the current paper, the transport code FLUKA is used for the calculations. It is widely applied for shielding design and analysis of accelerators and their components. The distributions of the radiation fields inside and outside the cyclotron bunker are presented in this paper. Both different irradiation scenarios and bunker configurations are considered in the conducted Monte Carlo simulations. These results will be used as a guidance in site planning.

Site Planning and Architectural Conceptual Design of a Electronics Factory Based on the Component Method

With the rapid development of the society and the economy, the urbanization have brought a lot of big impacts to China’s urban construction. The construction mode of large resource consumption is not consistent with the goal of sustainable development. At the same time, the number of workers in the construction industry is difficult to meet the needs of a large number of construction projects, and the labor cost is growing rapidly. Therefore,the architectural products need to be transformed and we need to build a sustainable urban construction system. By analyzing the transform under urbanization and traditional architectural design methods, the paper research the component method. Then, we show the application of this in site planning and architectural design. The project is in Jiangsu Province, China. The first work of the project was site planning. At this stage, the construction site requirements of prefabricated buildings were specially considered. After that, we entered the stage of architectural conceptual design, designers used component method to decompose the component system into several levels. The first level includes four functional systems, which are structure functional system, enclosure functional system, decoration functional system and equipment functional system. This paper mainly introduces the structure function system and enclosure function system.We hope that through the practice of component method, on the one hand, it can provide a method to link the design content of urban planning and architectural design; on the other hand, it can prepare for city information model.

FRACTURE LOAD OF SILVER SOLDERED JOINTS ON STAINLESS STEEL AND COBALT-CHROMIUM ORTHODONTIC WIRES WITH VARIOUS JOINING CONFIGURATIONS

The current research compared and analysed the tensile strength of silver soldered stainless steel and cobalt-chromium orthodontic wire joints with band material The effect of joint site planning on various orthodontic joining configurations was investigated. A total of sixty wire specimens were chosen, thirty in the stainless-steel group and thirty in the cobalt – chromium group. Again, each group's sample was divided into three subgroups, namely End – End, Round, and Orthodontic band material. The study findings suggested all three configurations can be used to make silver soldered joints regardless of the wire consistency. When subjecting the wire to joint site planning, however, stainless steel wire should be used with its limitations in mind.

FRACTURE LOAD OF SILVER SOLDERED JOINTS ON STAINLESS STEEL AND COBALT-CHROMIUM ORTHODONTIC WIRES WITH VARIOUS JOINING CONFIGURATIONS

The current research compared and analysed the tensile strength of silver soldered stainless steel and cobalt-chromium orthodontic wire joints with band material The effect of joint site planning on various orthodontic joining configurations was investigated. A total of sixty wire specimens were chosen, thirty in the stainless-steel group and thirty in the cobalt – chromium group. Again, each group's sample was divided into three subgroups, namely End – End, Round, and Orthodontic band material. The study findings suggested all three configurations can be used to make silver soldered joints regardless of the wire consistency. When subjecting the wire to joint site planning, however, stainless steel wire should be used with its limitations in mind.

Health emergencies in humanitarian crises

Initial assessment?, Measles immunization?, Water and sanitation?, Food and nutrition?, Shelter and site planning?, Basic healthcare?, Control of communicable diseases and epidemics?, Public health surveillance?, Human resources coordination and managment?, Post-emergency phase?