Lithic Inclusions in the Taupo Pumice Formation

<p>The Taupo Pumice Formation is a product of the Taupo eruption of about 1800a, and consists of three phreatomagmatic ash deposits, two plinian pumice deposits and a major low-aspect ratio and low grade (unwelded) ignimbrite which covered most part of the central North Island of New Zealand. The vent area for the eruption is located at Horomatangi Reefs in Lake Taupo. Lithics in the phreatoplinian ash deposits are negligible in quantity, but the plinian pumice deposits contain 5-10% lithics by volume in most near-vent sections. Lithics in the plinian pumice deposits are dominantly banded and spherulitic rhyolite with minor welded tuff, dacite and andesite. The ground layer which forms the base of the ignimbrite unit consists of dominantly lithics and crystals and is formed by the gravitational sedimentation of the 'heavies' from the strongly fluidized head of the pyroclastic flow. Lithic blocks in the ground layer are dominantly banded and spherulitic phenocryst-poor rhyolite, welded tuff with minor dacite and andesite. Near-vent exposures of the ground layer contain boulders upto 2 m in diameter. Friable blocks of hydrothermally altered rhyolite, welded tuff and lake sediments are found fractured but are preserved intact after transportation. This shows that the fluid/pyroclastic particle mixture provided enough support to carry such blocks upto a distance of 10 km from the vent. The rhyolite blocks are subdivided into hypersthene rhyolite, hypersthene-hornblende rhyolite and biotite-bearing rhyolite on the basis of the dominant ferromagnesian phenocryst assamblage. Hypersthene is the dominant ferromagnesian phenocryst in most of the rhyolite blocks in the ground layer and forms the major ferromagnesian crystal of the Taupo Sub-group tephra. The rhyolite blocks have similar whole rock chemistry to the Taupo Sub-group tephra and are probably derived from lava extrusions associated with the tephra eruptions from the Taupo Volcanic Centre in the last 10 ka. Older rhyolite domes and flows in the area are probably represented by the intensely hydrothermally altered rhyolite blocks in the ground layer. The dacite blocks contain hypersthene and augite as a major ferromagnesian phenocryst. Whole rock major and trace element analyses shows that the dacite blocks are distinct from the Tauhara dacites and from the dacites of Tongariro Volcanic Centre. The occurrence of dacite inclusions in significant quantity in the Taupo Pumice Formation indicates the presence of other dacite flows near the vent area. Four types of andesite blocks; hornblende andesite, plagioclase-pyroxene andesite, pyroxene andesite and olivine andesite occur as lithic blocks in the ground layer. The andesites are petrographically distinct from those encountered in deep drillholes at Wairakei (Waiora Valley Andesites), and are different from the Rolles Peak andesite in having lower Sr content. The andesite blocks show similar major and trace element content to those from the Tongariro Volcanic Centre. The roundness of the andesite blocks indicates that the blocks were transported as alluvium or lahars in to the lake basin before being incorporated into the pyroclastic flow. Two types of welded ignimbrite blocks are described. The lithic-crystal rich ignimbrite is correlated with a post-Whakamaru Group Ignimbrite (ca. 100 ka ignimbrite erupted from Taupo Volcanic Centre) which crops out to the north of Lake Taupo. The crystal rich ignimbrite is tentatively correlated with the Whakamaru Group Ignimbrites. The lake sediment boulders, pumiceous mudstone and siltstone in the ground layer probably correlate to the Huka Group sediments or younger Holocene sediments in the lake basin. A comparative mineral chemistry study of the lithic blocks was done. A change in chemistry of individual mineral species was found to accompany the variation in wholerock major element constituents in the different types of lithics. The large quantity of lithic blocks in the ground layer suggests extensive vent widening at the begining of the ignimbrite eruption. A simple model of flaring and collapse of the vent area caused by the down ward movement of the fragmentation surface is presented to explain the origin of the lithic blocks in the ground layer. The lithics in the Taupo Pumice Formation are therfore produced by the disruption of the country rock around the vent during the explosion and primary xenoliths from depths of magma generation were not found. Stratigraphic relations suggest that the most important depth of incorporation of lithics is within the post-Whakamaru Group Ignimbrite volcanics and volcaniclastic sedimentary units.</p>

Lithic Inclusions in the Taupo Pumice Formation

<p>The Taupo Pumice Formation is a product of the Taupo eruption of about 1800a, and consists of three phreatomagmatic ash deposits, two plinian pumice deposits and a major low-aspect ratio and low grade (unwelded) ignimbrite which covered most part of the central North Island of New Zealand. The vent area for the eruption is located at Horomatangi Reefs in Lake Taupo. Lithics in the phreatoplinian ash deposits are negligible in quantity, but the plinian pumice deposits contain 5-10% lithics by volume in most near-vent sections. Lithics in the plinian pumice deposits are dominantly banded and spherulitic rhyolite with minor welded tuff, dacite and andesite. The ground layer which forms the base of the ignimbrite unit consists of dominantly lithics and crystals and is formed by the gravitational sedimentation of the 'heavies' from the strongly fluidized head of the pyroclastic flow. Lithic blocks in the ground layer are dominantly banded and spherulitic phenocryst-poor rhyolite, welded tuff with minor dacite and andesite. Near-vent exposures of the ground layer contain boulders upto 2 m in diameter. Friable blocks of hydrothermally altered rhyolite, welded tuff and lake sediments are found fractured but are preserved intact after transportation. This shows that the fluid/pyroclastic particle mixture provided enough support to carry such blocks upto a distance of 10 km from the vent. The rhyolite blocks are subdivided into hypersthene rhyolite, hypersthene-hornblende rhyolite and biotite-bearing rhyolite on the basis of the dominant ferromagnesian phenocryst assamblage. Hypersthene is the dominant ferromagnesian phenocryst in most of the rhyolite blocks in the ground layer and forms the major ferromagnesian crystal of the Taupo Sub-group tephra. The rhyolite blocks have similar whole rock chemistry to the Taupo Sub-group tephra and are probably derived from lava extrusions associated with the tephra eruptions from the Taupo Volcanic Centre in the last 10 ka. Older rhyolite domes and flows in the area are probably represented by the intensely hydrothermally altered rhyolite blocks in the ground layer. The dacite blocks contain hypersthene and augite as a major ferromagnesian phenocryst. Whole rock major and trace element analyses shows that the dacite blocks are distinct from the Tauhara dacites and from the dacites of Tongariro Volcanic Centre. The occurrence of dacite inclusions in significant quantity in the Taupo Pumice Formation indicates the presence of other dacite flows near the vent area. Four types of andesite blocks; hornblende andesite, plagioclase-pyroxene andesite, pyroxene andesite and olivine andesite occur as lithic blocks in the ground layer. The andesites are petrographically distinct from those encountered in deep drillholes at Wairakei (Waiora Valley Andesites), and are different from the Rolles Peak andesite in having lower Sr content. The andesite blocks show similar major and trace element content to those from the Tongariro Volcanic Centre. The roundness of the andesite blocks indicates that the blocks were transported as alluvium or lahars in to the lake basin before being incorporated into the pyroclastic flow. Two types of welded ignimbrite blocks are described. The lithic-crystal rich ignimbrite is correlated with a post-Whakamaru Group Ignimbrite (ca. 100 ka ignimbrite erupted from Taupo Volcanic Centre) which crops out to the north of Lake Taupo. The crystal rich ignimbrite is tentatively correlated with the Whakamaru Group Ignimbrites. The lake sediment boulders, pumiceous mudstone and siltstone in the ground layer probably correlate to the Huka Group sediments or younger Holocene sediments in the lake basin. A comparative mineral chemistry study of the lithic blocks was done. A change in chemistry of individual mineral species was found to accompany the variation in wholerock major element constituents in the different types of lithics. The large quantity of lithic blocks in the ground layer suggests extensive vent widening at the begining of the ignimbrite eruption. A simple model of flaring and collapse of the vent area caused by the down ward movement of the fragmentation surface is presented to explain the origin of the lithic blocks in the ground layer. The lithics in the Taupo Pumice Formation are therfore produced by the disruption of the country rock around the vent during the explosion and primary xenoliths from depths of magma generation were not found. Stratigraphic relations suggest that the most important depth of incorporation of lithics is within the post-Whakamaru Group Ignimbrite volcanics and volcaniclastic sedimentary units.</p>

Geological aspects of shallow landslides induced by the Heavy Rain Event of July 2018 within Late Cretaceous rhyolite, southern Hiroshima Prefecture, Japan

&lt;p&gt;Rain-induced landslides often occur in clusters on hillslopes that have unique geological characteristics, such as lithology, weathering patterns, and hydrothermal alteration. However, the effects of geological factors on landslides involving rhyolites are not fully understood. A heavy rain event during July 2018 caused numerous debris avalanches and debris flows within areas underlain by the Late Cretaceous Takada Rhyolites, southern Hiroshima Prefecture, Japan. To understand the geological factors that influence landslides in areas underlain by rhyolites, we performed GIS analyses and field investigations of outcrops and landslide scars. The study area is rectangular, 9 km long, and 3 km wide, and the long sides, oriented NE&amp;#8211;SW in Kure City. The Norosan Welded Tuff, which forms the rhyolite unit in the study area, has near-vertical joints spaced 0.1&amp;#8211;5.0 m, and a large number of high-angle veinlets that record hydrothermal alteration. The average joint spacing is 1.8 m in the SW of the study area (0&amp;#8211;3.5 km), decreases from 1.8 to 0.4 m in the center (3.5&amp;#8211;5.0 km), and 0.4 m in the NE of the study area (5.0&amp;#8211;9.0 km). Tors are developed on the ground surface on hillslopes in the SW of the study area, but the NE of the study area is underlain by clay-rich altered soil without corestones. The 45 h and 4 h cumulative rainfall distributions prior to the landslide event were similar in the SW and NE parts of the study area. Furthermore, the NE and SW parts of the study area have a comparable proportion of surface area with similar topographic parameters (slope, planar curvature, and catchment area) to those of landslide scars. In spite of these similarities, the landslide density is about ten times higher in the NE of the study area (10&amp;#8211;55 /km&lt;sup&gt;2&lt;/sup&gt;), than in the SW. This difference is attributed to differences in joint density, and the intense weathering and alteration on joints within the rhyolite.&lt;/p&gt;

Chapter 18: Geology of Round Mountain, Nevada: A Giant Low-Sulfidation Epithermal Gold Deposit

The Round Mountain low-sulfidation epithermal Au deposit occurs within the rhyolitic tuff of Round Mountain (26.86 Ma) on the northeast side of an elliptical volcanic center that has morphology and volcanic facies suggesting it originated as a caldera. The hosting tuff comprises three pyroclastic flow and fall deposits (units T1 to T3). These are overlain successively by lacustrine sediments and volcaniclastic rocks. which may contain paleowater table levels formed at the time of ore formation and a 26.4 Ma postmineralization tuff unit. A linear vertical drop in the basement contact coincides with thick tuff fill and megabreccia, which is interpreted to follow the position of a WNW-trending ring fissure or vent wall that may have focused the locations of subsequent hydrothermal upflow zones. Orebodies are developed in strata-bound zones that are most extensive in poorly welded tuff, focused below overlying impermeable welded tuff in a WNW-trending, gently NW-plunging corridor above and mantling the SW-dipping paleoslope of basement rocks. Ore comprises disseminated pervasive adularia-quartz-pyrite ± illite alteration with electrum. The disseminated mineralization surrounds, and is most intensely developed in association with, a low-displacement extensional fault-vein network composed of conjugate NE- and SW-dipping faults and steeply dipping extensional veins. Vein orientations and kinematic indicators suggest ore formation occurred during localized NE-SW-directed extension that may have been related to late stages of volcanic subsidence, potentially in association with deep resurgent magmatism into ring fissures approximately 0.5 m.y. after deposition of the host tuff sequence.

Distinct stores and the routing of water in the deep critical zone of a snow-dominated volcanic catchment

This study combines major ion and isotope chemistry, age tracers, fracture density characterizations, and physical hydrology measurements to understand how the structure of the critical zone (CZ) influences its function, including water routing, storage, mean water residence times, and hydrologic response. In a high elevation rhyolitic tuff catchment in the Jemez River Basin Critical Zone Observatory (JRB-CZO) within the Valles Caldera National Preserve (VCNP) of northern New Mexico, a periodic precipitation pattern creates different hydrologic flow regimes during spring snowmelt, summer monsoon rain, and fall storms. Hydrometric, geochemical, and isotopic analyses of surface water and groundwater from distinct stores, most notably shallow groundwater that is likely a perched aquifer in consolidated collapse breccia and deeper groundwater in a fractured tuff aquifer system, enabled us to untangle the interactions of these groundwater stores and their contribution to streamflow across 1 complete water year (WY). Despite seasonal differences in groundwater response due to water partitioning, major ion chemistry indicates that deep groundwater from the highly fractured site is more representative of groundwater contributing to streamflow across the entire water year. Additionally, the comparison of streamflow and groundwater hydrographs indicates a hydraulic connection between the fractured welded tuff aquifer system and streamflow, while the shallow aquifer within the collapse breccia deposit does not show this same connection. Furthermore, analysis of age tracers and oxygen (δ18O) and stable hydrogen (δ2H) isotopes of water indicates that groundwater is a mix of modern and older waters recharged from snowmelt, and downhole neutron probe surveys suggest that water moves through the vadose zone both by vertical infiltration and subsurface lateral flow, depending on the lithology. We find that in complex geologic terrain like that of the JRB-CZO, differences in the CZ architecture of two hillslopes within a headwater catchment control water stores and routing through the subsurface and suggest that shallow groundwater does not contribute significantly to streams, while deep fractured aquifer systems contribute most to streamflow.