Interface Strengthening of PS/aPA Polymer Blend Nanocomposites via In Situ Compatibilization: Enhancement of Electrical and Rheological Properties

The process of strengthening interfaces in polymer blend nanocomposites (PBNs) has been studied extensively, however a corresponding significant enhancement in the electrical and rheological properties is not always achieved. In this work, we exploit the chemical reaction between polystyrene maleic anhydride and the amine group in nylon (polyamide) to achieve an in-situ compatibilization during melt processing. Herein, nanocomposites were made by systematically adding polystyrene maleic anhydride (PSMA) at different compositions (1–10 vol%) in a two-step mixing sequence to a Polystyrene (PS)/Polyamide (aPA) blend with constant composition ratio of 25:75 (PS + PSMA:aPA) and 1.5 vol% carbon nanotube (CNT) loading. The order of addition of the individual components was varied in two-step mixing procedure to investigate the effect of mixing order on morphology and consequently, on the final properties. The electrical and rheological properties of these multiphase nanocomposite materials were investigated. The optical microscope images show that for PS/aPA systems, CNTs preferred the matrix phase aPA, which is the thermodynamically favorable phase according to the wettability parameter calculated using Young’s equation. However, aPA’s great affinity for CNT adversely influenced the electrical properties of our blend. Adding PSMA to PS/aPA changed the structure of the droplet phase significantly. At 1.5 vol% CNT, a more regular and even distribution of the droplet domains was observed, and this produced a better framework to create more CNT networks in the matrix, resulting in a higher conductivity. For example, with only 1.5 vol% CNT in the PBN, at 3 vol% PSMA, the conductivity was 7.4 × 10−2 S/m, which was three and a half orders of magnitude higher than that seen for non-reactive PS/aPA/CNT PBN. The mechanism for the enhanced conductive network formation is delineated and the improved rheological properties due to the interfacial reaction is presented.

In Situ Compatibilization of Isotactic Polypropylene and High-Density Polyethylene by a Melt Cobranching Reaction

Incompatible polypropylene (PP) and polyethylene (PE) are difficult to separate in mixed recycling streams such as waste plastic packaging, which makes these polyolefin mixtures unsuitable for high-quality products. In this work, based on the free radical branching reaction, a co-branching reaction of isotactic polypropylene (iPP) and high-density polyethylene (HDPE) blends was carried out in the presence of the peroxide, free radical regulator and multifunctional acrylate monomer, and a star-like long-chain branching (LCB) copolymer was acquired. The effect of in situ compatibilization on the structure and mechanical properties of iPP/HDPE was investigated, and the compatibilization mechanism was discussed. Results showed that the mechanical properties of the modified blends were largely improved, and efficient in-situ compatibilization of iPP and HDPE could be taken place in a wide process window. Moreover, the size of the dispersed phase in the modified blend was clearly decreased, and the interfacial thickness increased. Compared with the pure iPP/HDPE blend, the initial crystallization temperature of iPP in the modified iPP/HDPE blend was increased, and long branched chains of the LCB copolymer were physically entangled with the chemical identical homopolymers or even participate in the crystallization of iPP and HDPE. Thanks to the in situ compatibilization strategy, the compatibility of iPP/HDPE was significantly improved.

Morphological and mechanical properties of biodegradable poly(glycolic acid)/poly(butylene adipate-co-terephthalate) blends with in situ compatibilization

A novel biodegradable poly(glycolic acid)/poly(butylene adipate-co-terephthalate) (PGA/PBAT) material with enhanced toughness through in situ compatibilization was prepared.