Visible Domain Photocatalysis Performance of Ti-Si Thermal-Sprayed Coatings

Cost and performance-effective materials used in advanced oxidation processes such as photocatalysis have obtained widespread attention in recent years. In this study, thermal spraying was used as a one-step method to obtain thick visible-light-active photocatalyst coatings on two types of substrates, namely, plain carbon steel and copper. A mixed metallic titanium–silicon powder bearing 10% wt. Si was used as feedstock. The optical bandgaps of the coatings were close to 1.000 eV, allowing good photodecoloration efficiencies (>89%) and mineralization efficiencies (>67%) for methylene blue dye from aqueous solutions under visible light irradiation. The photodegradation process could be successfully modelled by the Langmuir–Hinshelwood pseudo-first-order kinetic model, with reaction rate constants k between 0.16 and 1.06 h−1.

Electrochemical Preparation of Nano-Sized Silicon as a Lithium-Ion Battery Anode Material

Highly pure silicon is an important component in photovoltaic applications and has potential in battery technology. In this study, the electrochemical behavior of Si (IV) was discussed in a NaF−LiF−Na2SiO3−SiO2 electrolyte at 750 °C , and lithium-ion battery performance with electrodeposited silicon powder as anode material were investigated. The cyclic voltammograms illustrated that the reduction of Si(IV) on an Ag electrode followed an irreversible two-step, two-electron process: Si(IV) → Si(II) and Si(II) → Si(0). Both reduction steps involved diffusion control, and the diffusion coefficients were 1.18 and 1.22 × 10−6 cm2/s, respectively. Nanoscale spherical silicon was deposited between potentials of −1.0 to −1.6 V (vs. Pt) with support of X-ray diffraction patterns, Raman spectra, and scanning electron microscopy analysis. Combining the fabricated silicon with carbon, a Si@C composite anode material for lithium-ion batteries was prepared, and its specific capacity reached 1260 mAh/g. Notably, a capacity of 200 mAh/g was maintained over 100 cycles.

A solid-state approach for the low temperature synthesis of Cr3Si hollow particles

In this paper, pure cubic chromium silicide (Cr3Si) hollow particles have been successfully synthesized through the solid-state reaction of chromium sesquioxide, silicon powder and metallic lithium in an autoclave at 600 °C for 10 h. The as-prepared samples were characterized by means of X-ray diffraction, field emission scanning electron microscopy and transmission electron microscopy, which showed that the as-prepared samples were cubic phase Cr3Si hollow particles. Furthermore, the oxidation resistance of the obtained Cr3Si sample was also investigated.