Correlation between Rheological Fatigue Tests on Bitumen and Various Cracking Tests on Asphalt Mixtures

Accurate characterisation and appropriate binder selection are essential to increase the load-induced cracking resistance of asphalt mixtures at an intermediate temperature. Hence, the primary goal of this study was to correlate the cracking resistance exerted by the binder with the cracking performance of asphalt mixtures. The laboratory-based experimental plan covered various types of laboratory tests specified by various agencies and road authorities to study the correlation of a neat bitumen and five polymer-modified binders with their corresponding asphalt mixtures. The fatigue life of the binders was assessed through a Linear Amplitude Sweep (LAS) test and statistically correlated with various load-induced cracking parameters from the indirect tensile test, semi-circular bending (SCB) test, and four points bending beam test (FPBB) of asphalt mixtures at 25 °C. Binders and mixes were further grouped depending on their polymeric family (i.e., modified with a particular type of polymer) to validate their statistical correlation. The indicator that mostly correlated the binder properties with the asphalt mixture properties is the secant modulus from the SCB test. Fatigue parameters obtained through LAS better explain the asphalt fatigue performance obtained through FPBB; specifically, asphalt tests at high strain levels (e.g., 400 micro strain) better correlate to the LAS fatigue parameter (Nf).

Calculation Derivation and Test Verification of Indirect Tensile Strength of Asphalt Pavement Interlayers at Low Temperatures

When the direct tensile test is adopted to determine the interlayer tensile strength of the asphalt pavements, specimen separation or internal cracking often occurs at the bonding area of the loading head, rather than at the interlaminar bonding interface. In view of the tedious and discrete data of the direct tensile test, this paper attempts to introduce an indirect tensile test to determine the interlayer bond strength of asphalt pavement to solve this problem. However, the indirect tensile test method of a binder lacks the corresponding mechanical theory. This paper deduces the calculation formula of the indirect tensile strength of a binder based on elastic theory. A mechanical model of the test was established with the finite element method. In accordance with the two-dimensional elastic theory and the Flamant solution, an analytical solution of tensile stress in the indirect tensile test is proposed through the stress superposition. On this basis, the calculation formula for the indirect tensile strength of the interlaminar bonding is derived according to Tresca’s law. A low-temperature indirect tensile test was designed and conducted to verify the correctness of the formula. By comparing the results of the indirect tensile test and direct tensile test, it is found that the interlaminar strength of the mixture measured by them is similar, and the dispersion of indirect tensile test results is small. The results show that the indirect tensile test can replace the direct tensile test to evaluate the interlaminar tensile strength.

Study on Mesoscopic Mechanics of Recycled Asphalt Mixture in the Indirect Tensile Test

Reclaimed asphalt pavement (RAP) mainly contains asphalt binder and aggregates, and the RAP materials used in paving roads could save virgin materials. This paper studied the following: asphalt mixture with different RAP material contents was prepared; then the indirect tensile test was carried out, and the mesoscopic model of the recycled asphalt mixture was reconstructed digitally. Discrete element method (DEM) of indirect tensile test was carried out to analyze the mechanical properties of recycled asphalt mixture in mesoscopic perspective. The results showed that there were some gaps between the simulation result of the digital specimen model and the test value of the recycled asphalt mixture, but the velocity vector and the law of force chain development of the recycled asphalt mixture could be explained in mesoscopic perspective. It proved that the virtual simulation test of the mechanical test was effective. The damage process of recycled asphalt mixture was analyzed in mesoscopic perspective, and the unification of mechanical response and macroscopic appearance was completed. Meanwhile, the simulation method of mesoscopic mechanics was an effective supplement to traditional tests, and guided tests method theoretically.

From Complex Modulus E* to Creep Compliance D(t): Experimental and Modeling Study

Creep compliance (D(t)) is a very important input for the thermal cracking resistance in the Mechanistic-Empirical Pavement Design Guide (MEPDG). The aim of the work presented here is to predict the results of creep compliance D(t) from the result of complex modulus E*(ω). The work plan is divided in two main parts: an experimental part consisting of creep tests, and a modeling part. Three configurations were compared together, namely direct tensile, direct compression and indirect tensile tests. The modelling part consists of using a 2S2P1D model coupled to Kopelman approximation to switch from the frequency domain to the time domain. Additionally, 2S2P1D was used to calibrate the generalized Kelvin–Voigt model and get the creep compliance directly from E* results. The experimental results show that D(t) from direct tensile and direct compression are the same in the viscoelastic domain and are greater than D(t) from the indirect tensile test. The indirect tensile test (IDT) seems to be very difficult to achieve compared to the other two variants. The converted results using the 2S2P1D model coupled to Kopelman approximation and the results from the GKV model describe the experimental points very well.