[1,2-Bis(diphenylphosphanyl)ethane-κ2 P,P]chlorido(isonicotinamide-κN)palladium(II) nitrate acetonitrile monosolvate

The PdII central atom in the title complex, [PdCl(C26H24P2)(C6H6N2O)]NO3·CH3CN or [PdCl(dppe)(INAM)]NO3·CH3CN, where dppe is 1,2-bis(diphenylphosphanyl)ethane and INAM is isonicotinamide, exists in a slightly distorted square-planar environment defined by the two P atoms of the dppe ligand, a chloride ligand and the N atom of the isonicotinamide pyridyl ring. The crystal packing in the structure is held together by hydrogen bonds between the amide of the INAM ligand and the nitrate ions that complete the outer coordination sphere. A molecule of acetonitrile is also found in the asymmetric unit of the title complex.

Late Transition Metal Complexes of Pyridyldiphosphines

<p>This thesis provides an account of research into the properties of pyridyldiphosphines with o-xylene and m-xylene backbones. The coordination behaviour of the o-xylene based ligand with platinum, palladium, silver, rhodium and iridium metal centres has been studied, with an emphasis on whether the presence of the pyridyl rings affects the products formed. Platinum and palladium pincer complexes have been synthesised and the intermediates investigated. The formation of trimetallic complexes with these ligands acting as bridging ligands has also been explored. Two new pyridyldiphosphines, o-C₆H₄(CH₂PPy₂)₂ (3) and m-C₆H₄(CH₂PPy₂)₂ (4), and one known pyridyldiphosphine, PPy₂(CH₂)₃PPy₂ (5), have been synthesised via an improved method. Tris(2-pyridyl)phopshine was reacted with a lithium dispersion to give LiPPy₂, which was then reacted with the appropriate dichloride or dibromide compound to yield the desired ligand. The phosphine selenides of 3 and 4 were synthesised and the ¹J PSe values of 738 and 742 Hz indicated these ligands were less basic than PPh₃. While the ligands themselves were not water-soluble, protonation by a strong acid, such as HCl or H₂C(SO₂CF₃)₃, rendered them soluble in water. A series of [MX₂(PP)] complexes (where M = Pt, X = Cl, I, Me, Et, PP = 3, 5; M = Pd, X = Cl, Me PP = 3, 5) were synthesised. Complexes of 3 displayed dynamic behaviour in solution which was attributed to the backbone of the ligand inverting. When [PtMeCl(PP)] (27) was reacted with NaCH(SO₂CF₃)₂ no evidence for the coordination of the pyridyl nitrogens was observed. The synthesis of a series of unsymetrical [PtMeL(PP)]⁺ complexes enabled the comparison of the cis and trans influences of a range of ligands. The following cis influence series was compiled based on ³¹P NMR data of these complexes: Py ≈ Cl > SEt₂ > PTA > PPh₃. Reaction of 27 with NaCH(SO₂CF₃)₂ and carbon monoxide slowly formed an acyl complex, where the CO had inserted in the Pt–Me bond. The bis-chelated complexes [M(PP)₂] where M = Pt, Pd, and [Ag(PP)₂]⁺ were formed. In these complexes 3 acted as a diphosphine ligand and there was no evidence for any interaction between the pyridyl nitrogen atoms and the metal centre. Reaction of 3 with [Ir(COD)(μ-Cl)]₂ formed [IrCl(PP)(COD)] (42). When the chloride ligand in 42 was abstracted, the pyridyl nitrogens were able to interact with the iridium centre faciliating the isomerisation of the 1,2,5,6-ƞ⁴-COD ligand to a 1-к-4,5,6-ƞ³-C₈H₁₂ ligand. The X-ray crystal structure of [Ir(1-к-4,5,6-ƞ³-C₈H₁₂)(PPN)]BPh₄ (43) confirmed the P,P,N chelation mode of the ligand. In solution, 43 displayed hemilabile behaviour, with the pyridyl nitrogens exchanging at a rate faster than the NMR time scale at room temperature. The coordinated pyridyl nitrogen was able to be displaced by carbon monoxide to form [Ir(1-к-4,5,6-ƞ³-C₈H₁₂)(CO)(PP)]⁺. A series of [PtXY(μ-PP)]₂ complexes, where X = Y = Cl, Me, X = Cl, Y = Me and PP = 4, were formed initially when 4 was reacted with platinum(II) complexes. When heated, the dimers containing methyl ligands eliminated methane to form [PtX(PCP)] pincer complexes, X = Cl (49), Me (51). When the chloride ligand in 49 was abstracted no evidence of pyridyl nitrogen coordination was observed. Protonation of 49 did not yield a water-soluble pincer complex. The [PdCl₂(μ-PP)]₂ complex readily metallated when heated to give the pincer complex [PdCl(PCP)]. Given pyridyl nitrogen atoms are known to be good ligands for “hard” metal centres, the ability of the pyridyl nitrogens in 3 and 4 to coordinate to metal centres was investigated. While complexes with chloride ligands were found to form insoluble products, the synthesis of [(PtMe₂)₃(PP)], from the reaction of either 3 or [PtMe₂(PP)] (17) with dimethyl(hexa-1,5-diene)platinum, proceeded smoothly through a dimetallic intermediate. The same reactivity was observed in the synthesis of [(PtMe₂)₂PtMe(PCP)]. In contrast, the cationic heterotrimetallic complexes [{M(COD)}₂PtMe(PP)]²⁺ and [{M(COD)}₂PtMe(PCP)]²⁺, where M = Rh or Ir, were synthesised without the detection of any intermediates. However, dimetallic complexes were formed as part of a mixture when 17 or 51 was reacted with one equivalent of the appropriate metal complex.</p>

Synthesis, Properties, and Coordination Chemistry of t-Bu-Xantphos Ligands

<p>This thesis provides an account of research into a group of diphosphine ligands with a rigid xanthene backbone and tert -butyl substituents on the phosphorus atoms. The three ligands have different groups in the bridgehead position of the backbone (CMe₂, SiMe₂, or S) which change the natural (calculated) bite-angle of the ligand. The coordination chemistry of these t -Bu-xantphos ligands with late-transition metals has been investigated with a focus on metal complexes that may form in catalytic reactions. The three t -Bu-xantphos ligands were synthesised by lithiation of the backbone using sec -butyllithium/TMEDA and treatment with PtBu₂Cl. The natural biteangles of the Ph-xantphos (111.89–114.18°) and t -Bu-xantphos (126.80–127.56°) ligands were calculated using DFT. The bite-angle of the t -Bu-xantphos ligands is larger due to the increased steric bulk of the tert -butyl substituents. The electronic properties of the t -Bu-xantphos ligandswere also investigated by synthesis of their phosphine selenides. The values of ¹J PSe (689.1–698.5Hz) indicate that the t -Bu-xantphos ligands have a higher basicity than Ph-xantphos between PPh₂Me and PMe₃. The silver complexes, [Ag(t -Bu-xantphos)Cl] and [Ag(t -Bu-xantphos)]BF₄ were synthesised with the t -Bu-xantphos ligands. In contrast to systems with phenyl phosphines, all species were monomeric. [Rh(t -Bu-xantphos)Cl] complexes were synthesised, which reacted with H₂, forming [Rh(t -Bu-xantphos-ĸP,O,P ’)Cl(H)₂] complexes, and with CO, forming [Rh(t -Bu-xantphos)(CO)₂Cl] complexes. The [Rh(t -Bu-xantphos)Cl] species are air-sensitive readily forming [Rh(t -Bu-xantphos)Cl(ƞ²-O₂)] complexes. The crystal structure of [Rh(t -Bu-xantphos)Cl(ƞ²-O₂)], contained 15% of the dioxygen sites replaced with an oxo ligand. This is the first crystallographic evidence of a rhodium(III) oxo complex, and only the third rhodium oxo species reported. The coordination chemistry of the ligands with platinum(0) and palladium(0) showed some differences. [Pt(t -Bu-xantphos)(C₂H₄)] complexes were synthesised for all three ligands. However, reaction with [Pt(nb)₃] produced a mixture of [Pt(t -Bu-xantphos)] and [Pt(t -Bu-xantphos)(nb)] for t -Bu-sixantphos and t -Buthixantphos. Although few examples of isolable [Pt(PP)] complexes with diphosphines have been reported [Pt(t -Bu-thixantphos)] was isolated by removal of the norbornene. t -Bu-Xantphos formed small amounts of [Pt(t -Bu-xantphos)] initially, which progressed to [Pt(t -Bu-xantphos)H]X. The analogous reactions with [Pd(nb)₃] gave [Pd(t -Bu-xantphos)] and [Pd(t -Bu-xantphos)(nb)] complexes in all cases. [Pt(t -Bu-thixantphos)(C₂H₄)] and [M(t -Bu-thixantphos)] (M = Pd, Pt) react with oxygen forming [Pt(t -Bu-thixantphos)(ƞ²-O₂)], which reacts with CO to give [Pt(t -Bu-thixantphos-H-ĸ-C,P,P ’)OH] through a series of intermediates. [M(t -Bu-xantphos)Cl₂] (M = Pd, Pt) complexes were synthesised, showing exclusive trans coordination of the diphosphine ligands. The X-ray crystal structure of [Pt(t -Bu-thixantphos)Cl₂] has a bite-angle of 151.722(15)°. This is the first [PtCl₂(PP)] complex with a bite-angle between 114 and 171°. In polar solvents a chloride ligand dissociates from the [Pt(t -Bu-xantphos)Cl₂] complexes producing [Pt(t -Bu-xantphos-ĸP,O,P ’)Cl]⁺. The analogous [Pd(t -Bu-xantphos-ĸP,O,P ’)Cl]⁺ complexes were formed by reaction of the dichlorides complexes with NH₄PF₆. The [Pt(t -Bu-xantphos-ĸP,O,P ’)Me]⁺ pincer complexes were the only product from reaction with [Pt(C₆H₁₀)ClMe], with the stronger trans influence of the methyl ligand promoting loss of the chloride. The formation of the pincer complexes was further explored using DFT. The values of J PtC for the methyl carbons in the [Pt(t -Bu-xantphos-ĸP,O,P ’)Me]⁺ complexes, and J RhH for the hydride trans to the oxygen atom in the [Rh(t -Buxantphos-ĸP,O,P ’)Cl(H)₂] complexes were largest for t -Bu-sixantphos, then t -Buthixantphos, then t -Bu-xantphos. The trans influence of the t -Bu-xantphos oxygen donor follows the trend t -Bu-sixantphos < t -Bu-thixantphos < t -Bu-xantphos.</p>

Synthesis, Properties, and Coordination Chemistry of t-Bu-Xantphos Ligands

<p>This thesis provides an account of research into a group of diphosphine ligands with a rigid xanthene backbone and tert -butyl substituents on the phosphorus atoms. The three ligands have different groups in the bridgehead position of the backbone (CMe₂, SiMe₂, or S) which change the natural (calculated) bite-angle of the ligand. The coordination chemistry of these t -Bu-xantphos ligands with late-transition metals has been investigated with a focus on metal complexes that may form in catalytic reactions. The three t -Bu-xantphos ligands were synthesised by lithiation of the backbone using sec -butyllithium/TMEDA and treatment with PtBu₂Cl. The natural biteangles of the Ph-xantphos (111.89–114.18°) and t -Bu-xantphos (126.80–127.56°) ligands were calculated using DFT. The bite-angle of the t -Bu-xantphos ligands is larger due to the increased steric bulk of the tert -butyl substituents. The electronic properties of the t -Bu-xantphos ligandswere also investigated by synthesis of their phosphine selenides. The values of ¹J PSe (689.1–698.5Hz) indicate that the t -Bu-xantphos ligands have a higher basicity than Ph-xantphos between PPh₂Me and PMe₃. The silver complexes, [Ag(t -Bu-xantphos)Cl] and [Ag(t -Bu-xantphos)]BF₄ were synthesised with the t -Bu-xantphos ligands. In contrast to systems with phenyl phosphines, all species were monomeric. [Rh(t -Bu-xantphos)Cl] complexes were synthesised, which reacted with H₂, forming [Rh(t -Bu-xantphos-ĸP,O,P ’)Cl(H)₂] complexes, and with CO, forming [Rh(t -Bu-xantphos)(CO)₂Cl] complexes. The [Rh(t -Bu-xantphos)Cl] species are air-sensitive readily forming [Rh(t -Bu-xantphos)Cl(ƞ²-O₂)] complexes. The crystal structure of [Rh(t -Bu-xantphos)Cl(ƞ²-O₂)], contained 15% of the dioxygen sites replaced with an oxo ligand. This is the first crystallographic evidence of a rhodium(III) oxo complex, and only the third rhodium oxo species reported. The coordination chemistry of the ligands with platinum(0) and palladium(0) showed some differences. [Pt(t -Bu-xantphos)(C₂H₄)] complexes were synthesised for all three ligands. However, reaction with [Pt(nb)₃] produced a mixture of [Pt(t -Bu-xantphos)] and [Pt(t -Bu-xantphos)(nb)] for t -Bu-sixantphos and t -Buthixantphos. Although few examples of isolable [Pt(PP)] complexes with diphosphines have been reported [Pt(t -Bu-thixantphos)] was isolated by removal of the norbornene. t -Bu-Xantphos formed small amounts of [Pt(t -Bu-xantphos)] initially, which progressed to [Pt(t -Bu-xantphos)H]X. The analogous reactions with [Pd(nb)₃] gave [Pd(t -Bu-xantphos)] and [Pd(t -Bu-xantphos)(nb)] complexes in all cases. [Pt(t -Bu-thixantphos)(C₂H₄)] and [M(t -Bu-thixantphos)] (M = Pd, Pt) react with oxygen forming [Pt(t -Bu-thixantphos)(ƞ²-O₂)], which reacts with CO to give [Pt(t -Bu-thixantphos-H-ĸ-C,P,P ’)OH] through a series of intermediates. [M(t -Bu-xantphos)Cl₂] (M = Pd, Pt) complexes were synthesised, showing exclusive trans coordination of the diphosphine ligands. The X-ray crystal structure of [Pt(t -Bu-thixantphos)Cl₂] has a bite-angle of 151.722(15)°. This is the first [PtCl₂(PP)] complex with a bite-angle between 114 and 171°. In polar solvents a chloride ligand dissociates from the [Pt(t -Bu-xantphos)Cl₂] complexes producing [Pt(t -Bu-xantphos-ĸP,O,P ’)Cl]⁺. The analogous [Pd(t -Bu-xantphos-ĸP,O,P ’)Cl]⁺ complexes were formed by reaction of the dichlorides complexes with NH₄PF₆. The [Pt(t -Bu-xantphos-ĸP,O,P ’)Me]⁺ pincer complexes were the only product from reaction with [Pt(C₆H₁₀)ClMe], with the stronger trans influence of the methyl ligand promoting loss of the chloride. The formation of the pincer complexes was further explored using DFT. The values of J PtC for the methyl carbons in the [Pt(t -Bu-xantphos-ĸP,O,P ’)Me]⁺ complexes, and J RhH for the hydride trans to the oxygen atom in the [Rh(t -Buxantphos-ĸP,O,P ’)Cl(H)₂] complexes were largest for t -Bu-sixantphos, then t -Buthixantphos, then t -Bu-xantphos. The trans influence of the t -Bu-xantphos oxygen donor follows the trend t -Bu-sixantphos < t -Bu-thixantphos < t -Bu-xantphos.</p>

Late Transition Metal Complexes of Pyridyldiphosphines

<p>This thesis provides an account of research into the properties of pyridyldiphosphines with o-xylene and m-xylene backbones. The coordination behaviour of the o-xylene based ligand with platinum, palladium, silver, rhodium and iridium metal centres has been studied, with an emphasis on whether the presence of the pyridyl rings affects the products formed. Platinum and palladium pincer complexes have been synthesised and the intermediates investigated. The formation of trimetallic complexes with these ligands acting as bridging ligands has also been explored. Two new pyridyldiphosphines, o-C₆H₄(CH₂PPy₂)₂ (3) and m-C₆H₄(CH₂PPy₂)₂ (4), and one known pyridyldiphosphine, PPy₂(CH₂)₃PPy₂ (5), have been synthesised via an improved method. Tris(2-pyridyl)phopshine was reacted with a lithium dispersion to give LiPPy₂, which was then reacted with the appropriate dichloride or dibromide compound to yield the desired ligand. The phosphine selenides of 3 and 4 were synthesised and the ¹J PSe values of 738 and 742 Hz indicated these ligands were less basic than PPh₃. While the ligands themselves were not water-soluble, protonation by a strong acid, such as HCl or H₂C(SO₂CF₃)₃, rendered them soluble in water. A series of [MX₂(PP)] complexes (where M = Pt, X = Cl, I, Me, Et, PP = 3, 5; M = Pd, X = Cl, Me PP = 3, 5) were synthesised. Complexes of 3 displayed dynamic behaviour in solution which was attributed to the backbone of the ligand inverting. When [PtMeCl(PP)] (27) was reacted with NaCH(SO₂CF₃)₂ no evidence for the coordination of the pyridyl nitrogens was observed. The synthesis of a series of unsymetrical [PtMeL(PP)]⁺ complexes enabled the comparison of the cis and trans influences of a range of ligands. The following cis influence series was compiled based on ³¹P NMR data of these complexes: Py ≈ Cl > SEt₂ > PTA > PPh₃. Reaction of 27 with NaCH(SO₂CF₃)₂ and carbon monoxide slowly formed an acyl complex, where the CO had inserted in the Pt–Me bond. The bis-chelated complexes [M(PP)₂] where M = Pt, Pd, and [Ag(PP)₂]⁺ were formed. In these complexes 3 acted as a diphosphine ligand and there was no evidence for any interaction between the pyridyl nitrogen atoms and the metal centre. Reaction of 3 with [Ir(COD)(μ-Cl)]₂ formed [IrCl(PP)(COD)] (42). When the chloride ligand in 42 was abstracted, the pyridyl nitrogens were able to interact with the iridium centre faciliating the isomerisation of the 1,2,5,6-ƞ⁴-COD ligand to a 1-к-4,5,6-ƞ³-C₈H₁₂ ligand. The X-ray crystal structure of [Ir(1-к-4,5,6-ƞ³-C₈H₁₂)(PPN)]BPh₄ (43) confirmed the P,P,N chelation mode of the ligand. In solution, 43 displayed hemilabile behaviour, with the pyridyl nitrogens exchanging at a rate faster than the NMR time scale at room temperature. The coordinated pyridyl nitrogen was able to be displaced by carbon monoxide to form [Ir(1-к-4,5,6-ƞ³-C₈H₁₂)(CO)(PP)]⁺. A series of [PtXY(μ-PP)]₂ complexes, where X = Y = Cl, Me, X = Cl, Y = Me and PP = 4, were formed initially when 4 was reacted with platinum(II) complexes. When heated, the dimers containing methyl ligands eliminated methane to form [PtX(PCP)] pincer complexes, X = Cl (49), Me (51). When the chloride ligand in 49 was abstracted no evidence of pyridyl nitrogen coordination was observed. Protonation of 49 did not yield a water-soluble pincer complex. The [PdCl₂(μ-PP)]₂ complex readily metallated when heated to give the pincer complex [PdCl(PCP)]. Given pyridyl nitrogen atoms are known to be good ligands for “hard” metal centres, the ability of the pyridyl nitrogens in 3 and 4 to coordinate to metal centres was investigated. While complexes with chloride ligands were found to form insoluble products, the synthesis of [(PtMe₂)₃(PP)], from the reaction of either 3 or [PtMe₂(PP)] (17) with dimethyl(hexa-1,5-diene)platinum, proceeded smoothly through a dimetallic intermediate. The same reactivity was observed in the synthesis of [(PtMe₂)₂PtMe(PCP)]. In contrast, the cationic heterotrimetallic complexes [{M(COD)}₂PtMe(PP)]²⁺ and [{M(COD)}₂PtMe(PCP)]²⁺, where M = Rh or Ir, were synthesised without the detection of any intermediates. However, dimetallic complexes were formed as part of a mixture when 17 or 51 was reacted with one equivalent of the appropriate metal complex.</p>

Chlorido(4′-chloro-2,2′:6′,2′′-terpyridine-κ3 N,N′,N′′)(trifluoromethanesulfonato-κO)zinc(II) acetonitrile monosolvate

In the title complex, [Zn(CF3O3S)Cl(C15H10ClN3)]·CH3CN, the zinc(II) core is fivefold coordinated by one chloride, one trifluoromethanesulfonate O atom and three terpyridine N atoms in a slightly distorted square-pyramidal geometry. The structure provides a distinct example amongst other zinc(II) 4-chloroterpyridine complexes because of the unusual planarity of the coordinated chloride, the short length of the Zn—N bond opposite to the chloride ligand [1.9572 (15) Å], and the presence of an elongated Zn—O bond [2.3911 (14) Å] in the coordinated trifluoromethanesulfonate ion. A molecule of acetonitrile is also found in the asymmetric unit of the title complex.

Synthesis of a Half-Sandwich Hydroxidoiridium(III) Complex Bearing a Nonprotic N-Sulfonyldiamine Ligand and Its Transformations Triggered by the Brønsted Basicity

Synthesis and reactivities of a new mononuclear hydroxidoiridium(III) complex with a pentamethylcyclopentadienyl (Cp*) ligand are reported. The hydroxido ligand was introduced into an iridium complex having a nonprotic amine chelate derived from N-mesyl-N’,N’-dimethylethylenediamine by substitution of the chloride ligand using KOH. The resulting hydroxidoiridium complex was characterized by NMR spectroscopy, elemental analysis, and X-ray crystallography. The hydroxido complex was able to deprotonate benzamide and acetonitrile, and showed an ability to accept a hydride from 2-propanol to generate the corresponding hydrido complex quantitatively. In the reaction with mandelonitrile, a cyanide anion was transferred to the iridium center in preference to the hydride transfer. The cyanidoiridium complex was also identified in the reaction with acetone cyanohydrin, and could serve as catalyst species in the transfer hydrocyanation of benzaldehyde.

Intermolecular hydrogen bonding in isostructural pincer complexes [OH-( t-BuPOCOP t-Bu)MCl] (M = Pd and Pt)

In the crystal structure of the isostructural title compounds, namely {2,6-bis[(di-tert-butylphosphanyl)oxy]-4-hydroxyphenyl}chloridopalladium(II), [Pd(C22H39O3P2)Cl], 1, and {2,6-bis[(di-tert-butylphosphanyl)oxy]-4-hydroxyphenyl}chloridoplatinum(II), [Pt(C22H39O3P2)Cl], 2, the metal centres are coordinated in a distorted square-planar fashion by the POCOP pincer fragment and the chloride ligand. Both complexes form strong hydrogen-bonded chain structures through an interaction of the OH group in the 4-position of the aromatic POCOP backbone with the halide ligand.

Synthesis, Molecular and Supramolecular Structures of New Cd(II) Pincer-Type Complexes with s-TriazineCore Ligand

The manuscript described the synthesis and characterization of the new [Cd(BDMPT)2](ClO4)2; 1 and [Cd2(MBPT)2(H2O)2Cl](ClO4)3.4H2O ; 2s-triazine pincer-type complexes, where BDMPT and MBPT are 2,4-bis(3,5-dimethyl-1H-pyrazol-1-yl)-6-methoxy-1,3,5-triazine and 2-methoxy-4,6-bis(2-(pyridin-2-ylmsethylene)hydrazinyl)-1,3,5-triazinerespectively.The synthesized complexes were characterized using Fourier-transform infrared spectroscopy (FTIR), 1H and 13C NMR spectroscopy, and the single-crystal X-ray diffraction technique.The homoleptic mononuclear complex (1)contains a hexa-coordinated Cd(II) center with two tridentate N-pincer ligand (BDMPT) with a highly distorted octahedral coordination environment located as an intermediate case between the octahedron and trigonal prism. The heteroleptic dinuclear complex (2) contains two hepta-coordinated Cd(II) coordination spheres where each Cd(II) is coordinated with one pentadentate pincer N-chelate (MBPT), one water, and one bridged chloride ligand connecting the two metal ions. The different intermolecular interactions in the studied complexes were quantified using Hirshfeld analysis. Their thermal stabilities and FTIR spectra were compared with the corresponding free ligands. The strength and nature of Cd–N, Cd–O, and Cd–Cl coordination interactions were discussed in light of atoms in molecules calculations (AIM). The M(II)–BDMPT and M(II)–MBPT interaction energies revealed that such sterically hindered ligands have higher affinity toward large-size metal ions (M =Cd) compared to smaller ones (M= Ni or Mn).

Crystal structures of two PCN pincer iridium complexes and one PCP pincer carbodiphosphorane iridium intermediate: substitution of one phosphine moiety of a carbodiphosphorane by an organic azide

The structure of [Ir{(4-Cl-C6H4N3)C(dppm)-κ3 P,C,N}(dppm-κ2 P,P′)]Cl·1.5CH2Cl2·0.5C7H8 (C57H48Cl2IrN3P4·1.5CH2Cl2·0.5C7H8) (2), dppm = bis(diphenylphosphino)methane {systematic name: [7-(4-chlorophenyl)-1,1,3,3-tetraphenyl-5,6,7-triaza-κN 7-1,3λ4-diphospha-κP 1-hepta-4,6-dien-4-yl][methylenebis(diphenylphosphine)-κ2 P,P′]iridium(I) chloride–dichloromethane–toluene (2/3/1)}, resulting from the reaction of [IrClH{C(dppm)2-κ3 P,C,P)(MeCN)]Cl (1a) with 1-azido-4-chlorobenzene, shows a monocationic five-coordinate IrI complex with a distorted trigonal–bipyramidal geometry. In 2, the iridium centre is coordinated by the neutral triazeneylidenephosphorane (4-Cl-C6H4N3)C(dppm) acting as a PCN pincer ligand, and a chelating dppm unit. The structure of the coordination compound [IrCl(CN)H(C(dppm)2-κ3 P,C,P)]·CH3CN, (C52H45ClIrNP4·CH3CN) (1b) [systematic name: chloridocyanidohydrido(1,1,3,3,5,5,7,7-octaphenyl-1,3λ5,5λ4,7-tetraphospha-κ2 P 1,P 7-hept-3-en-4-yl)iridium(III) acetonitrile monosolvate], prepared from 1a and KCN, reveals an octahedral IrIII central atom with a meridional PCP pincer carbodiphosphorane (CDP) ligand; the chloride ligand is located trans to the central carbon of the CDP functionality while the hydrido and cyanido ligands are situated trans to each other. The chiral coordination compound [Ir(CN)((4-Cl-C6H4N3)CH(CH(P(Ph)2)2)-κ3 P,C,N)(dppm-κ2 P,P′)]·2CH3OH, (C58H48ClIrN4P4·2CH3OH) (3) (systematic name: {4-[3-(4-chlorophenyl)triazenido-κN 3]-1,1,3,3-tetraphenyl-1,3λ5-diphospha-κP 1-but-2-en-4-yl}cyanido[methylenebis(diphenylphosphine)-κ2 P,P′]iridium(III) methanol disolvate), formed via prolonged reaction of 1-azido-4-chlorobenzene with 1b, features a six-coordinate IrIII central atom. The iridium centre is coordinated by the dianionic facial PCN pincer ligand [(4-Cl-C6H4N3)CH(CH(P(Ph2)2)2)], a cyanido ligand trans to the central carbon of the PCN pincer ligand and a chelating dppm unit. Complex 2 exhibits a 2:1 positional disorder of the Cl− anion. The CH2Cl2 and C7H8 solvent molecules show occupational disorder, with the toluene molecule exhibiting additional 1:1 positional disorder with some nearly overlying carbon atoms.