Slater-Pauling-like Behavior of Spin Hall Conductivity in Pt-based Superlattices

The intrinsic spin Hall effect in the bulk systems of late transition metals (Os, Ir, Pt, and Au) as well as the Pt-based superlattices were investigated by using first-principle calculations. By comparing the computed spin Hall conductivities of Pt−M superlattices (M=Os, Ir, and Au) with different compositions and those obtained from atomic bulk composition, we saw that the spin Hall conductivities (SHCs) follow the behavior described by the Slater-Pauling curve, the maximum of which is at pure Pt bulk. From the examination of the band structures of the considered systems, we found that the origin of this behavior comes from the variation of the band structures as a direct consequence of the change of the number of electrons and hybridization effects.

Synthesis, Properties, and Coordination Chemistry of t-Bu-Xantphos Ligands

<p>This thesis provides an account of research into a group of diphosphine ligands with a rigid xanthene backbone and tert -butyl substituents on the phosphorus atoms. The three ligands have different groups in the bridgehead position of the backbone (CMe₂, SiMe₂, or S) which change the natural (calculated) bite-angle of the ligand. The coordination chemistry of these t -Bu-xantphos ligands with late-transition metals has been investigated with a focus on metal complexes that may form in catalytic reactions. The three t -Bu-xantphos ligands were synthesised by lithiation of the backbone using sec -butyllithium/TMEDA and treatment with PtBu₂Cl. The natural biteangles of the Ph-xantphos (111.89–114.18°) and t -Bu-xantphos (126.80–127.56°) ligands were calculated using DFT. The bite-angle of the t -Bu-xantphos ligands is larger due to the increased steric bulk of the tert -butyl substituents. The electronic properties of the t -Bu-xantphos ligandswere also investigated by synthesis of their phosphine selenides. The values of ¹J PSe (689.1–698.5Hz) indicate that the t -Bu-xantphos ligands have a higher basicity than Ph-xantphos between PPh₂Me and PMe₃. The silver complexes, [Ag(t -Bu-xantphos)Cl] and [Ag(t -Bu-xantphos)]BF₄ were synthesised with the t -Bu-xantphos ligands. In contrast to systems with phenyl phosphines, all species were monomeric. [Rh(t -Bu-xantphos)Cl] complexes were synthesised, which reacted with H₂, forming [Rh(t -Bu-xantphos-ĸP,O,P ’)Cl(H)₂] complexes, and with CO, forming [Rh(t -Bu-xantphos)(CO)₂Cl] complexes. The [Rh(t -Bu-xantphos)Cl] species are air-sensitive readily forming [Rh(t -Bu-xantphos)Cl(ƞ²-O₂)] complexes. The crystal structure of [Rh(t -Bu-xantphos)Cl(ƞ²-O₂)], contained 15% of the dioxygen sites replaced with an oxo ligand. This is the first crystallographic evidence of a rhodium(III) oxo complex, and only the third rhodium oxo species reported. The coordination chemistry of the ligands with platinum(0) and palladium(0) showed some differences. [Pt(t -Bu-xantphos)(C₂H₄)] complexes were synthesised for all three ligands. However, reaction with [Pt(nb)₃] produced a mixture of [Pt(t -Bu-xantphos)] and [Pt(t -Bu-xantphos)(nb)] for t -Bu-sixantphos and t -Buthixantphos. Although few examples of isolable [Pt(PP)] complexes with diphosphines have been reported [Pt(t -Bu-thixantphos)] was isolated by removal of the norbornene. t -Bu-Xantphos formed small amounts of [Pt(t -Bu-xantphos)] initially, which progressed to [Pt(t -Bu-xantphos)H]X. The analogous reactions with [Pd(nb)₃] gave [Pd(t -Bu-xantphos)] and [Pd(t -Bu-xantphos)(nb)] complexes in all cases. [Pt(t -Bu-thixantphos)(C₂H₄)] and [M(t -Bu-thixantphos)] (M = Pd, Pt) react with oxygen forming [Pt(t -Bu-thixantphos)(ƞ²-O₂)], which reacts with CO to give [Pt(t -Bu-thixantphos-H-ĸ-C,P,P ’)OH] through a series of intermediates. [M(t -Bu-xantphos)Cl₂] (M = Pd, Pt) complexes were synthesised, showing exclusive trans coordination of the diphosphine ligands. The X-ray crystal structure of [Pt(t -Bu-thixantphos)Cl₂] has a bite-angle of 151.722(15)°. This is the first [PtCl₂(PP)] complex with a bite-angle between 114 and 171°. In polar solvents a chloride ligand dissociates from the [Pt(t -Bu-xantphos)Cl₂] complexes producing [Pt(t -Bu-xantphos-ĸP,O,P ’)Cl]⁺. The analogous [Pd(t -Bu-xantphos-ĸP,O,P ’)Cl]⁺ complexes were formed by reaction of the dichlorides complexes with NH₄PF₆. The [Pt(t -Bu-xantphos-ĸP,O,P ’)Me]⁺ pincer complexes were the only product from reaction with [Pt(C₆H₁₀)ClMe], with the stronger trans influence of the methyl ligand promoting loss of the chloride. The formation of the pincer complexes was further explored using DFT. The values of J PtC for the methyl carbons in the [Pt(t -Bu-xantphos-ĸP,O,P ’)Me]⁺ complexes, and J RhH for the hydride trans to the oxygen atom in the [Rh(t -Buxantphos-ĸP,O,P ’)Cl(H)₂] complexes were largest for t -Bu-sixantphos, then t -Buthixantphos, then t -Bu-xantphos. The trans influence of the t -Bu-xantphos oxygen donor follows the trend t -Bu-sixantphos < t -Bu-thixantphos < t -Bu-xantphos.</p>

Synthesis, Properties, and Coordination Chemistry of t-Bu-Xantphos Ligands

<p>This thesis provides an account of research into a group of diphosphine ligands with a rigid xanthene backbone and tert -butyl substituents on the phosphorus atoms. The three ligands have different groups in the bridgehead position of the backbone (CMe₂, SiMe₂, or S) which change the natural (calculated) bite-angle of the ligand. The coordination chemistry of these t -Bu-xantphos ligands with late-transition metals has been investigated with a focus on metal complexes that may form in catalytic reactions. The three t -Bu-xantphos ligands were synthesised by lithiation of the backbone using sec -butyllithium/TMEDA and treatment with PtBu₂Cl. The natural biteangles of the Ph-xantphos (111.89–114.18°) and t -Bu-xantphos (126.80–127.56°) ligands were calculated using DFT. The bite-angle of the t -Bu-xantphos ligands is larger due to the increased steric bulk of the tert -butyl substituents. The electronic properties of the t -Bu-xantphos ligandswere also investigated by synthesis of their phosphine selenides. The values of ¹J PSe (689.1–698.5Hz) indicate that the t -Bu-xantphos ligands have a higher basicity than Ph-xantphos between PPh₂Me and PMe₃. The silver complexes, [Ag(t -Bu-xantphos)Cl] and [Ag(t -Bu-xantphos)]BF₄ were synthesised with the t -Bu-xantphos ligands. In contrast to systems with phenyl phosphines, all species were monomeric. [Rh(t -Bu-xantphos)Cl] complexes were synthesised, which reacted with H₂, forming [Rh(t -Bu-xantphos-ĸP,O,P ’)Cl(H)₂] complexes, and with CO, forming [Rh(t -Bu-xantphos)(CO)₂Cl] complexes. The [Rh(t -Bu-xantphos)Cl] species are air-sensitive readily forming [Rh(t -Bu-xantphos)Cl(ƞ²-O₂)] complexes. The crystal structure of [Rh(t -Bu-xantphos)Cl(ƞ²-O₂)], contained 15% of the dioxygen sites replaced with an oxo ligand. This is the first crystallographic evidence of a rhodium(III) oxo complex, and only the third rhodium oxo species reported. The coordination chemistry of the ligands with platinum(0) and palladium(0) showed some differences. [Pt(t -Bu-xantphos)(C₂H₄)] complexes were synthesised for all three ligands. However, reaction with [Pt(nb)₃] produced a mixture of [Pt(t -Bu-xantphos)] and [Pt(t -Bu-xantphos)(nb)] for t -Bu-sixantphos and t -Buthixantphos. Although few examples of isolable [Pt(PP)] complexes with diphosphines have been reported [Pt(t -Bu-thixantphos)] was isolated by removal of the norbornene. t -Bu-Xantphos formed small amounts of [Pt(t -Bu-xantphos)] initially, which progressed to [Pt(t -Bu-xantphos)H]X. The analogous reactions with [Pd(nb)₃] gave [Pd(t -Bu-xantphos)] and [Pd(t -Bu-xantphos)(nb)] complexes in all cases. [Pt(t -Bu-thixantphos)(C₂H₄)] and [M(t -Bu-thixantphos)] (M = Pd, Pt) react with oxygen forming [Pt(t -Bu-thixantphos)(ƞ²-O₂)], which reacts with CO to give [Pt(t -Bu-thixantphos-H-ĸ-C,P,P ’)OH] through a series of intermediates. [M(t -Bu-xantphos)Cl₂] (M = Pd, Pt) complexes were synthesised, showing exclusive trans coordination of the diphosphine ligands. The X-ray crystal structure of [Pt(t -Bu-thixantphos)Cl₂] has a bite-angle of 151.722(15)°. This is the first [PtCl₂(PP)] complex with a bite-angle between 114 and 171°. In polar solvents a chloride ligand dissociates from the [Pt(t -Bu-xantphos)Cl₂] complexes producing [Pt(t -Bu-xantphos-ĸP,O,P ’)Cl]⁺. The analogous [Pd(t -Bu-xantphos-ĸP,O,P ’)Cl]⁺ complexes were formed by reaction of the dichlorides complexes with NH₄PF₆. The [Pt(t -Bu-xantphos-ĸP,O,P ’)Me]⁺ pincer complexes were the only product from reaction with [Pt(C₆H₁₀)ClMe], with the stronger trans influence of the methyl ligand promoting loss of the chloride. The formation of the pincer complexes was further explored using DFT. The values of J PtC for the methyl carbons in the [Pt(t -Bu-xantphos-ĸP,O,P ’)Me]⁺ complexes, and J RhH for the hydride trans to the oxygen atom in the [Rh(t -Buxantphos-ĸP,O,P ’)Cl(H)₂] complexes were largest for t -Bu-sixantphos, then t -Buthixantphos, then t -Bu-xantphos. The trans influence of the t -Bu-xantphos oxygen donor follows the trend t -Bu-sixantphos < t -Bu-thixantphos < t -Bu-xantphos.</p>

Late Transition Metal Complexes of Pentafluorophenylphosphino-Pincer Ligands

<p>This thesis details the synthesis of new examples of electron-poor pincer ligands, featuring bis(pentafluorophenyl)phosphine donors attached to 1,3-substituted phenylene or 2,6-substituted pyridine backbones, to create tridentate PCP and PNP ligands. The effect of the ligands’ electronic nature on the coordination chemistry and ease of pincer complex synthesis with late transition metals is discussed, as is the catalytic activity of the resultant palladium pincer complexes in the Heck and Suzuki reactions. Symmetric PCP and PNP ligands possessing bis(pentafluorophenyl)phosphinite and bis(pentafluorophenyl)phosphoramine functionalities were synthesised by reaction of bis(pentafluorophenyl)phosphine bromide with resorcinol, 3-hydroxybenzyl-di- tert -butylphosphine, 2,6-diaminopyridine, or 2,6-dihydroxypyridine, affording 1,3- [(C6F5)2PO]2C6H4 (POCOPH, 1), 1-[(C6F5)2PO]-3-(tBu2PCH2)2C6H4 (POCCPH, 3), 2,6-[(C6F5)2PNH]2C6H3N (PNNNP, 10), and 2,6-[(C6F5)2PO]2C6H3N (PONOP, 11) respectively. The previously reported 1,3-[(C6F5)2PCH2]2C6H4 (PCCCPH, 2) was also synthesised, with the literature yield improved upon by the use of magnesium-anthracene to generate the required Grignard reagent. The coordination chemistry of the POCOPH ligand 1 with platinum(0) alkene and platinum(II) dimethyl precursors revealed an affinity for the formation of cis-bridged oligomeric structures. The dimer [(POCOPH)Pt(nb)]2 (14, nb = norbornene) was isolated and crystallographically characterised from the reaction between 1 and [Pt(nb)3]. The solid state structure revealed the presence of stabilising - interactions between the aromatic ligand backbones, which were also observed in solution by 1H NMR spectroscopy. Reactions of ligand 1 with platinum and palladium dichloride or chloromethyl starting materials led to rare examples of cis,trans-dimers of the type cis,trans-[(POCOPH)MClX]2 (M = Pd, Pt; X = Cl, Me). In part due to facile dimer formation with 1, metallation of the ligand backbone to form the tridentate pincer complex [(POCOP)PtCl] (25) required long reaction times and high temperatures. It was observed that platinum dichloride starting materials with more strongly binding ancillary ligands were less prone to oligomer formation, and could facilitate more rapid metallation to from 25. More facile pincer complex formation was also observed for more electron-rich ligands with both PCP and PNP pincer ligands. The electron poor platinum and palladium POCOP, PCCCP, and POCCP pincer complexes (where the free ligand had been deprotonated upon metallation) were synthesised and subsequently converted into the metal carbonyl species [(PCP)M(CO)]+. Analysis of C−O stretching frequencies by infrared spectroscopy confirmed complexes of POCOP ligand 1 were the most electron poor, while those of POCCP ligand 3 were the most electron rich. Decarbonylation of the palladium pincer complexes was observed in solution and in the solid state, and was more facile for complexes with a higher wavenumber C−O stretch. Reaction of the [(PCP)PtCl] pincer complexes with methyl nucleophiles revealed that treatment with methylmagnesium iodide resulted in halide exchange, while methyllithium promoted nucleophilic attack at phosphorus. Spectroscopic data indicated that in one instance this led to pentafluorophenyl migration to the metal centre to form a [(PCP)Pt(C6F5)] complex. Dimethylzinc was successful in methylating the platinum PCP complexes; however, it was observed to degrade the palladium PCP pincer complexes. Treatment of the rhodium PNP pincer complex [(PNNNP)RhCl] (49) with dimethylzinc also resulted in degradation, which spectroscopic evidence indicated proceeded via ligand deprotonation and the formation of a zinc adduct of 49. Low temperature protonolysis of the [(PCP)PtMe] species did not reveal any information about possible interactions between the metal and liberated methane. The catalytic activity of the electron-poor [(PCP)PdCl] complexes were assessed in the Heck and Suzuki cross-coupling reactions. The complexes of 1, 2, and 3 were all found to possess only modest activity in the Heck reaction, functioning as precatalysts which decomposed to give catalytically-active Pd(0) colloids. Under milder Suzuki reaction conditions, the most electron-poor complex, [(POCOP)PdCl] (28) proved to be one of the most active pincer catalysts known for this reaction, able to achieve a turnover number of 176,000 for the coupling of electronically-deactivated aryl bromides and phenylboronic acid. Mercury poisoning tests revealed that Suzuki reactions catalysed by 28 proceeded via a homogeneous active species.</p>

Late Transition Metal Complexes of Pentafluorophenylphosphino-Pincer Ligands

<p>This thesis details the synthesis of new examples of electron-poor pincer ligands, featuring bis(pentafluorophenyl)phosphine donors attached to 1,3-substituted phenylene or 2,6-substituted pyridine backbones, to create tridentate PCP and PNP ligands. The effect of the ligands’ electronic nature on the coordination chemistry and ease of pincer complex synthesis with late transition metals is discussed, as is the catalytic activity of the resultant palladium pincer complexes in the Heck and Suzuki reactions. Symmetric PCP and PNP ligands possessing bis(pentafluorophenyl)phosphinite and bis(pentafluorophenyl)phosphoramine functionalities were synthesised by reaction of bis(pentafluorophenyl)phosphine bromide with resorcinol, 3-hydroxybenzyl-di- tert -butylphosphine, 2,6-diaminopyridine, or 2,6-dihydroxypyridine, affording 1,3- [(C6F5)2PO]2C6H4 (POCOPH, 1), 1-[(C6F5)2PO]-3-(tBu2PCH2)2C6H4 (POCCPH, 3), 2,6-[(C6F5)2PNH]2C6H3N (PNNNP, 10), and 2,6-[(C6F5)2PO]2C6H3N (PONOP, 11) respectively. The previously reported 1,3-[(C6F5)2PCH2]2C6H4 (PCCCPH, 2) was also synthesised, with the literature yield improved upon by the use of magnesium-anthracene to generate the required Grignard reagent. The coordination chemistry of the POCOPH ligand 1 with platinum(0) alkene and platinum(II) dimethyl precursors revealed an affinity for the formation of cis-bridged oligomeric structures. The dimer [(POCOPH)Pt(nb)]2 (14, nb = norbornene) was isolated and crystallographically characterised from the reaction between 1 and [Pt(nb)3]. The solid state structure revealed the presence of stabilising - interactions between the aromatic ligand backbones, which were also observed in solution by 1H NMR spectroscopy. Reactions of ligand 1 with platinum and palladium dichloride or chloromethyl starting materials led to rare examples of cis,trans-dimers of the type cis,trans-[(POCOPH)MClX]2 (M = Pd, Pt; X = Cl, Me). In part due to facile dimer formation with 1, metallation of the ligand backbone to form the tridentate pincer complex [(POCOP)PtCl] (25) required long reaction times and high temperatures. It was observed that platinum dichloride starting materials with more strongly binding ancillary ligands were less prone to oligomer formation, and could facilitate more rapid metallation to from 25. More facile pincer complex formation was also observed for more electron-rich ligands with both PCP and PNP pincer ligands. The electron poor platinum and palladium POCOP, PCCCP, and POCCP pincer complexes (where the free ligand had been deprotonated upon metallation) were synthesised and subsequently converted into the metal carbonyl species [(PCP)M(CO)]+. Analysis of C−O stretching frequencies by infrared spectroscopy confirmed complexes of POCOP ligand 1 were the most electron poor, while those of POCCP ligand 3 were the most electron rich. Decarbonylation of the palladium pincer complexes was observed in solution and in the solid state, and was more facile for complexes with a higher wavenumber C−O stretch. Reaction of the [(PCP)PtCl] pincer complexes with methyl nucleophiles revealed that treatment with methylmagnesium iodide resulted in halide exchange, while methyllithium promoted nucleophilic attack at phosphorus. Spectroscopic data indicated that in one instance this led to pentafluorophenyl migration to the metal centre to form a [(PCP)Pt(C6F5)] complex. Dimethylzinc was successful in methylating the platinum PCP complexes; however, it was observed to degrade the palladium PCP pincer complexes. Treatment of the rhodium PNP pincer complex [(PNNNP)RhCl] (49) with dimethylzinc also resulted in degradation, which spectroscopic evidence indicated proceeded via ligand deprotonation and the formation of a zinc adduct of 49. Low temperature protonolysis of the [(PCP)PtMe] species did not reveal any information about possible interactions between the metal and liberated methane. The catalytic activity of the electron-poor [(PCP)PdCl] complexes were assessed in the Heck and Suzuki cross-coupling reactions. The complexes of 1, 2, and 3 were all found to possess only modest activity in the Heck reaction, functioning as precatalysts which decomposed to give catalytically-active Pd(0) colloids. Under milder Suzuki reaction conditions, the most electron-poor complex, [(POCOP)PdCl] (28) proved to be one of the most active pincer catalysts known for this reaction, able to achieve a turnover number of 176,000 for the coupling of electronically-deactivated aryl bromides and phenylboronic acid. Mercury poisoning tests revealed that Suzuki reactions catalysed by 28 proceeded via a homogeneous active species.</p>

Late Transition Metal (LTM)-NHC Catalyzed Transformations of Renewable Chemicals to Fine Chemicals, Fuels, and Intermediates

This title of the book chapter deals with the late transition metal-NHC (N-heterocyclic carbene) catalyzed transformations of renewable chemicals, i.e., bio-mass resources (carbohydrates/vegetable oils/natural products) into useful chemicals via oxidation, hydrogenation, dehydration, polymerization, hydrolysis, etc. along with brief introductory notes on late transition metals, carbenes, and renewable chemicals for better understanding to the reader.

Principles Determining the Structure of Transition Metals

For the better part of a century researchers across disciplines have sought to explain the crystallography of the elemental transition metals: hexagonal close packed, body centered cubic, and face centered cubic in a form similar to that used to rationalize the structure of organic molecules and inorganic complexes. Pauling himself tried with limited success to address the origins of transition metal stability. These early investigators were handicapped, however, by incomplete knowledge regarding the structure of metallic electron density. Here, we exploit modern approaches to electron density analysis to first comprehensively describe transition metal electron density. Then, we use topological partitioning and quantum mechanically rigorous treatments of kinetic energy to account for the structure of the density as arising from the interactions between metallic polyhedra. We argue that the crystallography of the early transition metals results from charge transfer from the so called “octahedral” to “tetrahedral cages” while the face centered cubic structure of the late transition metals is a consequence of anti-bonding interactions that increase octahedral hole kinetic energy.

Principles Determining the Structure of Transition Metals

For the better part of a century researchers across disciplines have sought to explain the crystallography of the elemental transition metals: hexagonal close packed, body centered cubic, and face centered cubic in a form similar to that used to rationalize the structure of organic molecules and inorganic complexes. Pauling himself tried with limited success to address the origins of transition metal stability. These early investigators were handicapped, however, by incomplete knowledge regarding the structure of metallic charge density. Here we exploit modern approaches to charge analysis to first comprehensively describe transition metal charge density. Then, we use topological partitioning and quantum mechanically rigorous treatments of kinetic energy to account for the structure of the density as arising from the interactions between metallic tetrahedra. We argue that the crystallography of the early transition metals results from charge transfer from the so called &ldquo;octahedral&rdquo; to &ldquo;tetrahedral holes&rdquo; while the face centered cubic structure of the late transition metals is a consequence of antibonding interactions that increase octahedral hole kinetic energy.