Air, helium and water leakage in rubber O-ring seals with application to syringes

We study the leakage of fluids (liquids or gases) in syringes with glass barrel, steel plunger and rubber O-ring stopper. The leakrate depends on the interfacial surface roughness and on the viscoelastic properties of the rubber. Random surface roughness is produced by sandblasting the rubber O-rings. We present a very simple theory for gas flow which takes into account both the diffusive and ballistic flow. The theory shows that the interfacial fluid flow (leakage) channels are so narrow that the gas flow is mainly ballistic (the so called Knudsen limit). We compare the leakrate obtained using air and helium. For barrels filled with water we observe no leakage even if leakage occurs for gases. We interpret this as resulting from capillary (Laplace pressure or surface energy) effects.

The role of mineral nanoparticles at a fluid-magnetite interface: Implications for trace-element uptake in hydrothermal systems

The migrating fluid-mineral interface provides an opportunity for the uptake of trace elements as solid solutions in the newly formed crystal lattice during the non-equilibrium growth of the crystal. However, mineral nanoparticles could precipitate directly from the interfacial fluid when it evolves to a supersaturated situation. To better understand the role of mineral nanoparticles in this scenario, this study focuses on a well-documented magnetite with oscillatory zoning from a skarn deposit by using high-resolution transmission electron microscopy (TEM). Our results show that the Al concentration in magnetite measured on a micrometer-scale is caused by three different effects: Al solid solution, Al-rich nanometer-sized lamellae, and zinc spinel nanoparticles in the host magnetite. Here, we propose a genetic relationship among the three different phases mentioned above. At first, a continuous increase of the Al concentration in the interfacial fluid can be incorporated into the crystal lattice of magnetite forming a solid solution. During cooling in a later stage, aluminum in magnetite is oversaturated and exsolution of hercynite (Al-rich lamellae) occurs from the host magnetite. If the Al concentration at the fluid-magnetite interface still increases during further growth of magnetite, the substitution of Fe by Al has gradually reached saturation so that aluminum cannot be incorporated in the magnetite crystal structure any longer. Using the magnetite lattice as a template, nucleation of abundant zinc spinel nanoparticles occurs. This will, in turn, lead to a gradual depletion of Al concentration in the interfacial fluid until the available ions for zinc spinel nucleation and growth have been used up. As a result, the migrating fluid-magnetite interface will enrich the Al concentration in the interfacial fluid until the available ion concentration is sufficient for nucleation of zinc spinel phase again. The fluid-mineral interface in this mechanism has been repeatedly utilized during crystal growth, providing an efficient way for the uptake of trace element from a related undersaturated bulk fluid.

Interfacial fluid transport is a key to hydrogel bioadhesion

Attaching hydrogels to soft internal tissues is a key to the development of a number of biomedical devices. Nevertheless, the wet nature of hydrogels and tissues renders this adhesion most difficult to achieve and control. Here, we show that the transport of fluids across hydrogel−tissue interfaces plays a central role in adhesion. Using ex vivo peeling experiments on porcine liver, we characterized the adhesion between model hydrogel membranes and the liver capsule and parenchyma. By varying the contact time, the tissue hydration, and the swelling ratio of the hydrogel membrane, a transition between two peeling regimes is found: a lubricated regime where a liquid layer wets the interface, yielding low adhesion energies (0.1 J/m2 to 1 J/m2), and an adhesive regime with a solid binding between hydrogel and tissues and higher adhesion energies (1 J/m2 to 10 J/m2). We show that this transition corresponds to a draining of the interface inducing a local dehydration of the tissues, which become intrinsically adhesive. A simple model taking into account the microanatomy of tissues captures the transition for both the liver capsule and parenchyma. In vivo experiments demonstrate that this effect still holds on actively hydrated tissues like the liver capsule and show that adhesion can be strongly enhanced when using superabsorbent hydrogel meshes. These results shed light on the design of predictive bioadhesion tests as well as on the development of improved bioadhesive strategies exploiting interfacial fluid transport.

Tension grips the flow

Surface tension plays a dominant role in the formation and stability of soap films. It renders them both a quasi-two-dimensional fluid and an elastic membrane at the same time. The techniques for measuring the surface tension of the soap solution may very well apply to the static soap film, but how can the surface tension of a soap film be unintrusively measured, and what value would it assume? The answer, being at the intersection of physical chemistry, non-equilibrium physics and interfacial fluid dynamics, is not amenable to deduction via established methods. In a joint theoretical and experimental study, Sane et al. (J. Fluid Mech., vol. 841, 2018, R2) exploit elasticity theory to glean the answer through a simple, yet elegant framework.