Validity and reliability of palatal rugae morphometric assessment with 3D laser scanned models

Aim: To assess the reliability and validity of morphometric features on 3D digital models produced by scanning maxillary dental casts of Malaysian Malay subjects. Methods: Dental casts of 20 subjects were scanned using a 3D laser scanner (Next Engine Inc., Santa Monica, California, USA). The palatal rugae morphometric features were assessed on the resulting 3D models using 3-Matic Research 9.0 software (Materialise NV, Heverlee, Belgium). The assessments were repeated by the first and second authors to assess the intra- and interexaminer reliability, respectively. Rugae morphometric features were also evaluated on the conventional plaster models to assess the validity of the 3D method. Results: Kappa values of the validity ranged from 0.807 to 0.922 for rugae shape, size category and direction. The intraclass correlation coefficient (ICC) for rugae number validity was 0.979. For intra-examiner reliability, kappa values ranged from 0.716-1.000 for rugae shape, size category and direction. The ICC for rugae number intra-examiner reliability was 0.949. Kappa values of interexaminer reliability for rugae shape, size category and direction were 0.723-885, while the ICC of rugae number was 0.896. Conclusion: Palatal rugae analyses on 3D digital models scanned by the 3D Next Engine laser scanner using 3-Matic Research 9.0 software are valid and reliable.

Evaluating for a correlation between osteopathic examination and ultrasonography on thoracic spine asymmetry

Context The thoracic spine is a common area of focus in osteopathic manipulative medicine (OMM) for a variety of conditions. Thoracic spine somatic dysfunction diagnosis is achieved by palpating for asymmetry at the tips of the transverse processes (TPs). Previous studies reveal that instead of following the rule of threes, the TPs of a given thoracic vertebra generally align with the spinous process (SP) of the vertebra above. Ultrasonography has been widely utilized as a diagnostic tool to monitor musculoskeletal conditions; it does not utilize ionizing radiation, and it has comparable results to gold-standard modalities. In the case of thoracic somatic dysfunction, ultrasound (US) can be utilized to determine the location of each vertebral TP and its relationship with the SP. Previous studies have investigated the correlation between OMM and ultrasonography of the cervical, lumbar, and sacral regions. However, there has been no study yet that has compared osteopathic structural examination with ultrasonographic examination of the thoracic vertebral region. Objectives To examine the relationship between osteopathic palpation and ultrasonographic measurements of the thoracic spine by creating a study design that utilizes interexaminer agreement and correlation. Methods The ClinicalTrials.gov study identifier is NCT04823637. Subjects were student volunteers recruited from the Midwestern University (MWU)—Glendale campus. A nontoxic, nonpermanent marker was utilized to mark bony landmarks on the skin. Two neuromusculoskeletal board-certified physicians (OMM1, OMM2) separately performed structural exams by palpating T2–T5 TPs to determine vertebral rotation. Two sonographers (US1, US2) separately scanned and measured the distance from the tip of the SP to the adjacent TPs of the vertebral segment below. Demographic variables were summarized with mean and standard deviation. Interexaminer agreement was assessed with percent agreement, Cohen’s Kappa, and Fleiss’ Kappa. Correlation was measured by Spearman’s rank correlation coefficient. Recruitment and protocols were approved by the MWU Institutional Review Board (IRB). Results US had fair interexaminer agreement for the overall most prominent segmental rotation of the T3–T5 thoracic spine, with Cohen’s Kappa at 0.27 (0.09, 0.45), and a total agreement percentage at 51.5%. Osteopathic palpation revealed low interexaminer agreement for the overall most prominent vertebral rotation, with Cohen’s Kappa at 0.05 (0.0, 0.27), and 31.8%. Segment-specific vertebral analysis revealed slight agreement between US examiners, with a correlation coefficient of 0.23, whereas all other pairwise comparisons showed low agreement and correlation. At T4, US had slight interexaminer agreement with 0.24 correlation coefficient, and osteopathic palpation showed low interexaminer (OMM1 vs. OMM2) agreement (0.17 correlation coefficient). At T5, there was moderate agreement between the two sonographers with 0.44 (0.27, 0.60) and 63.6%, with a correlation coefficient of 0.57, and slight agreement between OMM1 and OMM2 with 0.12 (0.0, 0.28) and 42.4%, with 0.23 correlation coefficient. Conclusions This preliminary study of an asymptomatic population revealed that there is a low-to-moderate interexaminer reliability between sonographers, low-to-slight interexaminer reliability between osteopathic physicians, and low interexaminer reliability between OMM palpatory examination and ultrasonographic evaluation of the thoracic spine.

Radiographic changes in the temporomandibular joint related to medication in rheumatic diseases

Objectives: The purpose of this study was to assess radiographical changes on temporomandibular joint (TMJ) in relation the autoimmune rheumatic diseases and the medicines that treat this diseases with cone beam computed tomography(CBCT). Methods: 65 people with rheumatoid diseases were included in the study and divided into five subgroups according to drugs they used. Condyle height (CH), anteroposterior dimension (APD), mesiolateral dimension (MLD) and superior joint space (SJS) were measured in order to evaluate mandibular condyle dimensions. Further, were evaluated in terms of osteoarthritic changes such as erosion, flattening, osteophyte and subchondral cyst in the mandibular condyle. TMJ measurements were compared between study-control groups and subgroups by using Student’s t-test, Mann-Whitney-U test, one-way analysis of variance (ANOVA) and Kruskal-Wallis test. The association between osteoarthritic features, rheumatoid status was tested by using χ2 test. Observers were blinded to all groups. Cohen κ values (0853–0945) and Spearman’s correlation coefficient (0.959–0.997) indicated high interexaminer reliability. Results: Condylar dimentions were significantly lower in CH and SJS in rheumatic diseases group (p < 0.001), however APD (p = 0,681) and MLD (p = 0,757) was not different significantly. Osteoarthritic changes such as erosion (p < 0.001), flattening (p = 0.005), osteophyte (p = 0.001) and subchondral cyst (p = 0.001) were significantly higher in the patient group. None of the parameters were different significantly according to subgroups determined according to drugs used(p > 0.05). Conclusions: Degenerative changes may cause decrease in condyle size and changes in condyle position. It is a process that can continue despite the use of antirheumatic or immunosuppressive drugs. All of these can become the source of possible TMJ problems.

Accuracy of three cone-beam CT devices and two software systems in the detection of vertical root fractures

Objectives : The aim of this study was to compare the accuracy of vertical root fracture (VRF) detection using three tomography devices and two software systems in teeth with different endodontic fillings. Methods : The sample consisted of 45 premolars divided into 3 groups: No filling (NF, n=15); Gutta percha (GP, n=15) and Metallic Post (MP, n=15). Cone-beam computed tomography (CBCT) images were acquired in Kodak 9000 3D, Orthopantomography 300 (OP300) and PreXion 3D devices, before and after induced root fractures. Two oral radiologists analyzed all images using InVivoDental and e-Vol DX software systems. The analysis was repeated after 15 days in 30% of the sample. Data analysis compared receiver operating characteristic (ROC) curves, as well the areas under the ROC curves. Accuracy, sensitivity, specificity, positive and negative predictive value were calculated according to each tomographic device and software. Intra- and interexaminer reliability were tested using the Kappa coefficient. Results: The highest accuracy was seen in the image set from the PreXion 3D, using InVivo (0.96) or e-Vol DX (0.92) in image analysis. The OP300 device presented a similar performance of the PreXion 3D in teeth with different endodontic fillings. When using e-Vol DX, the accuracy of Kodak 9000 3D improved from 0.62 to 0.74. Conclusions: The PreXion 3D device is the most accurate when detecting VRF, with a performance similar to the OP300 in endodontic filled teeth. Kodak 9000 3D is indicated for teeth without fillings, with better accuracy using e-Vol DX software.

A Comparative Study on the Inter-Session and InterExaminer Reliability of Corneal Power Measurement Using Various Keratometry Instruments

Introduction: The purpose of this study was to evaluate inter-session repeatability, inter-examiner reproducibility and inter-device agreement of corneal power measurements from manual keratometer, autokeratometer, topographer, Pentacam high resolution and IOLMaster. Methods: Two sets of mean corneal power measurements (n=40) were compared for inter-session repeatability and inter-examiner reproducibility in each instrument. Repeatability and reproducibility were evaluated by within-subject standard deviation (Sw), coefficient of variation (COV) and intraclass correlation coefficient (ICC). A oneway repeated measures analysis of variance was conducted to compare differences in the corneal power between each instrument pair. The Bland and Altman analysis and Pearson’s correlation were employed to assess agreement and determine strength of relationship between measurements. Results: There were no significant differences in mean corneal power measurements between 2 different visits (p > 0.05). The Sw and COV values between 2 visits were lower than 0.09 D and 0.20 % respectively. The ICCs were stronger than 0.99 in all instruments. For reproducibility of each instrument, differences of the measurements between 2 different examiners were also insignificant (p > 0.05). The Sw and COV values between 2 examiners were lower than 0.11 D and 0.23 % respectively. The ICCs were 0.99 and above in all instruments. The 95% limit of agreement between instruments ranged from -0.29 to 1.13 D and the r-values were stronger than 0.84. Conclusion: The corneal power measurements using these 5 instruments were repeatable and reproducible. These instruments can also be used interchangeably, however the topographer should be used with caution.