Reactive Nanoparticles Derived from Polysaccharide Phenyl Carbonates

Polysaccharide (PS) based nanoparticles (NP) are of great interest for biomedical applications. A key challenge in this regard is the functionalization of these nanomaterials. The aim of the present work was the development of reactive PS-NP that can be coupled with an amino group containing compounds under mild aqueous conditions. A series of cellulose phenyl carbonates (CPC) and xylan phenyl carbonates (XPC) with variable degrees of substitution (DS) was obtained by homogeneous synthesis. The preparation of PS-NP by self-assembling of these hydrophobic derivatives was studied comprehensively. While CPC mostly formed macroscopic aggregates, XPC formed well-defined spherical NP with diameters around 100 to 200 nm that showed a pronounced long-term stability in water against both particle aggregation as well as cleavage of phenyl carbonate moieties. Using an amino group functionalized dye it was demonstrated that the novel XPC-NP are reactive towards amines. A simple coupling procedure was established that enables direct functionalization of the reactive NP in an aqueous dispersion. Finally, it was demonstrated that dye functionalized XPC-NP are non-cytotoxic and can be employed in advanced biomedical applications.

Homogeneous synthesis of hydroxylamine hydrochloride via acid-catalyzed hydrolysis of nitromethane

A continuous homogeneous synthesis of NH2OH·HCl was achieved and well described with a segmented semi-empirical kinetics model.

Homogeneous Synthesis of Cationic Chitosan via New Avenue

Using a solvent formed of alkali and urea, chitosan was successfully dissolved in a new solvent via the freezing–thawing process. Subsequently, quaternized chitosan (QC) was synthesized using 3-chloro-2-hydroxypropyl trimethyl ammonium chloride (CHPTAC) as the cationic reagent under different incubation times and temperatures in a homogeneous system. QCs cannot be synthesized at temperatures above 60 °C, as gel formation will occur. The structure and properties of the prepared QC were characterized and quaternary groups were comfirmed to be successfully incorporated onto chitosan backbones. The degree of substitution (DS) ranged from 16.5% to 46.8% and the yields ranged from 32.6% to 89.7%, which can be adjusted by changing the molar ratio of the chitosan unit to CHPTAC and the reaction time. QCs inhibits the growth of Alicyclobacillus acidoterrestris effectively. Thus, this work offers a simple and green method of functionalizing chitosan and producing quaternized chitosan with an antibacterial effect for potential applications in the food industry.

A Combined XRD, Solvatochromic, and Cyclic Voltammetric Study of Poly (3,4-Ethylenedioxythiophene) Doped with Sulfonated Polyarylethersulfones: Towards New Conducting Polymers

Despite the poor solubility in organic solvents, poly (3,4-ethylenedioxythiophene) (PEDOT) is one of the most successful conducting polymers. To improve PEDOT conductivity, the dopants commonly used are molecules/polymers carrying sulfonic functionalities. In addition to these species, sulfonated polyarylethersulfone (SPAES), obtained via homogeneous synthesis with different degrees of sulfonation (DS), can be used thanks to both the tight control over the DS and the charge separation present in SPAES structure. Here, PEDOTs having enhanced solubility in the chosen reaction solvents (N,N-dimethylformamide, dimethylacetamide, dimethyl sulfoxide, and N-methyl-2-pyrrolidone) were synthesized via a high-concentration solvent-based emulsion polymerization with very low amounts of SPAES as dopant (1% w/w with respect to EDOT monomer), characterized by different DS. The influence of solvents and of the adopted doping agent was studied on PEDOT_SPAESs analyzing (i) the chemical structure, comparing via X-ray diffraction (XRD) the crystalline structures of undoped and commercial PEDOTs with PEDOT_SPAES’ amorphous structure; (ii) solvatochromic behavior, observing UV absorption wavelength variation as solvents and SPAES’ DS change; and (iii) electrochemical properties: voltammetric peak heights of PEDOT_SPAES cast onto glassy carbon electrodes differ for each solvent and in general are better than the ones obtained for neat SPAES, PEDOTs, and glassy carbon.