Multiple-Collision Free-Electron Laser Compton Backscattering for a High-Yield Gamma-Ray Source

We observed multiple-collision free-electron laser (FEL)-Compton backscattering in which a multi-bunch electron beam makes head-on collisions with multi-pulse FELs in an optical cavity, using an infrared FEL system in the storage ring NIJI-IV. It was demonstrated that the measured spectrum of the multiple-collision FEL-Compton backscattering gamma rays was the summation of the spectra of the gamma rays generated at each collision point. Moreover, it was demonstrated that the spatial distribution of the multiple-collision FEL-Compton backscattering gamma rays was the summation of those of the gamma rays generated at each collision point. Our experimental results proved quantitatively that the multiple collisions in the FEL-Compton backscattering process are effective in increasing the yield of the gamma rays. By applying the multiple-collision FEL-Compton backscattering to high-repetition FEL devices such as energy recovery linac FELs, an unprecedented high-yield gamma-ray source with quasi-monochromaticity and wavelength tunability will be realized.

The Compton electron beam Polarimeter for the AmPS ring

The longitudinal polarization of the stored electron beam in the AmPS ring will be measured through the laser Compton backscattering technique. With the outlined design the measurement of the expected 70% degree of polarization to a statistical precision of 3% requires less than 60 sec under ideal conditions.

A Compton Backscattering Polarimeter for Electron Beams below 1 GeV

A recently installed polarized electron source will allow internal target experiments to be performed with polarized electrons at the NIKHEF Internal Target Hall, lb measure the longitudinal component of the polarization vector of the stored electron beam, a Polarimeter based on spin-dependent Compton scattering has been developed and successfully commissioned

Tau mass measurement at BES-III

A scan of the threshold region of the process e+ e−→ τ+τ− with integrated luminosity about 140 pb−1 was performed with the BES-III detector at the BEPC-II collider in order to measure the τ-lepton mass. The beam energy was determined by the Compton backscattering method. To verify the measurement accuracy scans of the J/ψ and ψ′ resonances were performed.