This paper examines the influence of etching regimes on the reflectance of black silicon formed by Ni-assisted chemical etching. Black silicon exhibits properties of high light absorptance. The measured minimum values of the reflectance (R-min) of black silicon with thickness of 580 nm formed by metal-assisted chemical etching (MACE) for 60 minutes at 460 lx illumination were 2,3% in the UV region (200–400 nm), 0,5% in the visible region (400–750 nm) and 0,3% in the IR region (750–1300 nm). The findings showed that the reflectance of black silicon depends on its thickness, illumination and treatment duration. In addition, the porosity and refractive index were calculated.
High aspect ratio silicon nanowires (SiNWs) prepared by metal-assisted chemical etching were passivated by using catalytic chemical vapor deposition (Cat-CVD).
We present 11.7% efficient p-type crystalline silicon solar cells with a nanoscale textured surface and no dielectric antireflection coating. We propose nanocrystalline-like textured surface consisting of nanocrystalline columnar structures of diameters from 50 to 100 nm and depth of about 500 nm formed by reactive-ion etching (RIE) in multihollow cathode system. This novel nano textured surface acts as an antireflective absorbing surface of c-Si abbreviate as ARNAB (antireflective nanoabsorber). Light shining on the surface of RIE-etched silicon bounces back and forth between the spikes in such a way that most of it never comes back. Radio frequency (RF) hollow cathode discharge allows an improvement of plasma density by an order of magnitude in comparison to standard RF parallel-plate discharge. Desirable black silicon layer has been achieved when RF power of about 20 Watt per one hollow cathode glow is applied for our multihollow cathode system. The RF power frequency was 13.56 MHz. The antireflection property of ARNAB textured surface has been investigated and compared with wet-textured and PECVD coated silicon samples. Solar cell using low-cost spin-on coating technique has been demonstrated in this paper. We have successfully achieved 11.7% efficient large area (98 cm2) ARNAB textured crystalline silicon solar cell using low-cost spin-on coating (SOD) doping.
Influence of metal assisted chemical etching time period on mesoporous structure in as-cut upgraded metallurgical grade silicon for solar cell application