scholarly journals Cross‐Link‐Functionalized Nanoparticles for Rapid Excretion in Nanotheranostic Applications

2020 ◽  
Vol 132 (46) ◽  
pp. 20733-20741
Author(s):  
Zhuoran Ma ◽  
Feifei Wang ◽  
Yeteng Zhong ◽  
Felix Salazar ◽  
Jiachen Li ◽  
...  
2020 ◽  
Vol 59 (46) ◽  
pp. 20552-20560 ◽  
Author(s):  
Zhuoran Ma ◽  
Feifei Wang ◽  
Yeteng Zhong ◽  
Felix Salazar ◽  
Jiachen Li ◽  
...  

2020 ◽  
Vol 16 (5) ◽  
pp. 748-756
Author(s):  
Mir Waqas Alam ◽  
Tentu Nageswara Rao ◽  
Yarasani Prashanthi ◽  
Vourse Sridhar ◽  
Adil Alshoaibi ◽  
...  

Background: Herbicides are very beneficial in the crop yield with the aid of controlling weeds within the agriculture, but several herbicides are chronic in soil. Objective: In this study, nanoparticles and the packages of synthesized novel silica nanoparticles were studied for the preconcentration of herbicides. Methods: These nanoparticles prepared by the Stöber mechanism were purified and functionalized. Nanoparticles thus prepared successfully were used as supporting material for the preconcentration of residues of herbicides in the water. Results: Preconcentration was achieved by preparing the silica-based solid-phase-extraction cartridges. Nanoparticles used for this purpose were within the range of 50-250 nm. An SPE cartridge was prepared by packing 200 mg of silica nanoparticle in the empty cartridge of diameter 5.5 cm and length 0.6 cm in between PTFE frits. Aqueous solutions of 0.1 μg/ml of herbicides were prepared separately, and 10 ml of the solution was passed through the cartridge at the rate of 0.2 ml/min. After passing 10 ml volume of the aqueous solution, residues adsorbed on the cartridge were eluted using 2 ml of acetonitrile. The eluate was injected to determine the herbicide residue adsorbed on the SPE cartridge. Conclusion: In the study, it was found that greater than 90% of the herbicide residues were trapped on silica nanoparticle-based SPE cartridge. An analytical method was developed for the simultaneous determination of these herbicides. The residues were quantified by LC-MS/MS with ESI mode.


Author(s):  
K. S. Zhansakova ◽  
E. N. Eremin ◽  
G. S. Russkikh ◽  
O. V. Kropotin

The work studies vulcanization characteristics of elastomers based on isoprene rubber filled with carbon black N330 and boron nitride (BN). The influence of the boron nitride (BN) concentration on technological, dynamic, physical and mechanical properties of elastomers has been researched. The application of boron nitride for producing rubber with good properties has been considered. With a gradual increase of the inert filler BN concentration up to 35%, a decrease in the curing rate by 33% and polymer cross-link density by 26% is observed. Moreover, the start time of vulcanization increases by almost 300%, the optimal curing time by 200%.


Author(s):  
Xiaoying Wei ◽  
Ying Peng ◽  
Cameron Bryan ◽  
Kun Yang
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document