Residual Bioprosthetic Valve Immunogenicity: Forgotten, Not Lost

Despite early realization of the need to control inherent immunogenicity of bioprosthetic replacement heart valves and thereby mitigate the ensuing host response and its associated pathology, including dystrophic calcification, the problem remains unresolved to this day. Concerns over mechanical stiffness associated with prerequisite high cross-link density to effect abrogation of this response, together with the insinuated role of leaching glutaraldehyde monomer in subsequent dystrophic mineralization, have understandably introduced compromises. These have become so entrenched as a benchmark standard that residual immunogenicity of the extracellular matrix has seemingly been relegated to a very subordinate role. Instead, focus has shifted toward the removal of cellular compartment antigens renowned for their implication in the failure of vascularized organ xenotransplants. While decellularization certainly offers advantages, this review aims to refocus attention on the unresolved matter of the host response to the extracellular matrix. Furthermore, by implicating remnant immune and inflammatory processes to bioprosthetic valve pathology, including pannus overgrowth and mineralization, the validity of a preeminent focus on decellularization, in the context of inefficient antigen and possible residual microbial remnant removal, is questioned.

Effect of the cure time on the Mechanical Properties of Silicone Rubber used as Socket Liners

This work is focused on the upper part of the prosthesis which is called a socket, it is in contact connect with the amputated part. The shear force between skin and socket, local pressure, sweating, and bacteria generation, all lead to skin inflammation and a bad smell. Consequently, the prosthesis became uncomfortable for a patient. To address this issue silicone rubber liners is proposed to use because it can absorb moisture, stress distribution, and anti-bacterial. The curing time and temperature are important factors for determining crosslink density, from the results obtained, can be noticed that, the cross-link density can greatly affect the silicone rubber properties, it can have a direct effect on the tensile strength, modulus of elasticity, percentage of elongation as well as the water absorption, and the cure time (15 min.) shoes the best resalt. As a result, using it making the prosthesis more comfortable and acceptable to the patient. In this paper, the effect of cure time on physical properties was studied.

Structural analysis on the basis of effect of molybdenum on the Pr2O3 doped lead borate glasses series-II

This paper explains the role of molybdenum on the structural analysis of the investigated rare earth ion Pr3+ doped, lead borate (75 PbO — [25 – (x+y)]B2O3—yMoO3—xPr2O3) glass matrix has been discussed using the relation between Tg and structural parameters like average cross-link density ( n ¯ c ), average stretching force constant (F) and the number of bonds per unit volume (nb). Densities, molar volume have been measured as a function of MoO3 content. Linear variation in density and in the molar volume has been observed and is credited to the role of MoO3 in the investigated glasses. Based on the properties like good stability and bond strength, investigated glasses possibly suitable for the design of optoelectronic devices.

Smart actuation of liquid crystal elastomer elements: cross-link density-controlled response

Liquid crystalline elastomers (LCEs) exhibit some remarkable physical properties, such as the reversible large mechanical deformation induced by proper environmental stimuli of different nature, such as the thermal stimulus, allowing their use as soft actuators. The unique features displayed by LCE are originated from their anisotropic microstructure characterized by the preferential orientation of the mesogen molecules embedded in the polymer network. An open issue in the design of LCEs is how to control their actuation effectiveness: the amount of mesogens molecules, how they are linked to the network, the order degree, the cross-link density are some controllable parameters whose spatial distribution, however, in general cannot be tuned except the last one. In this paper, we develop a theoretical micromechanical-based framework to model and explore the effect of the network cross-link density on the mechanical actuation of elements made of liquid crystalline elastomer. In this context, the light-induced polymerization (photopolymerization) for obtaining the elastomers’ cross-linked network is of particular interest, being suitable for precisely tuning the cross-link density distribution within the material; this technology enables to obtain a molecular-scale architected LCEs, allowing the optimal design of the obtainable actuation. The possibility to properly set the cross-link density arrangement within the smart structural element (LCE microstructure design and optimization), represents an intriguing way to create molecular-scale engineered LCE elements having material microstructure encoded desired actuation capabilities.

GTR/NBR/Silica Composites Performance Properties as a Function of Curing System: Sulfur versus Peroxides

In this work, conventional sulfur and two types of organic peroxides (dicumyl peroxide (DCP) and di-(2-tert-butyl-peroxyisopropyl)-benzene (BIB)) curing systems were used to investigate the possibility for tailoring of the performance properties of GTR/NBR blends reinforced with a variable content of highly dispersive silica (0–30 phr). The curing characteristics, static mechanical and acoustical properties, swelling behavior, thermal stability, and microstructure of the prepared composites were investigated. The results show that regardless of the curing system used, increasing the content of highly dispersive silica resulted in the improvement of the mechanical properties of the studied materials. It was observed that sulfur-based systems are the best choice in terms of cross-linking efficiency determined based on torque increment and cross-link density parameters. However, further analysis of the physico-mechanical properties indicated that the cross-linking efficiency does not match the performance of specimens, and the materials obtained using organic peroxides show higher tensile properties. This is due to the improved physical interactions between the GTR/NBR matrix and highly dispersive silica when using peroxide systems. It was confirmed using the analysis of the Wolff activity coefficient, indicating the enhanced synergy.

Manifestation of Waste Silicate Type Additives and Electron Beam Irradiation on Properties of Sbr/devulcanized Waste Tire Rubber Composites for Floor Tiles Applications

Virgin styrene-butadiene rubber (SBR) was replaced by devulcanized waste tire rubber (DWR) 50/50 and used as a rubber base for preparing composites to depend on different silicate types at fixed content 40 phr (part per hundred part of rubber). All composites were mixed on a rubber roll mill and then subjected to electron beam irradiation to induce cross-linking at a dose of 100 kGy. Different silicate fillers were used in this study like precipitated silica (PS) 40 phr, waste glass window (WG) - PS 20/20 phr, fly ash (FA)-PS 20/20 phr, and micaosilica (MS)-PS 20/20 phr. Waste silicate was treated with (3-aminopropyl)trimethoxysilane (APTMS) and blended with PS. Mechanical properties were investigated for composites like tensile strength, elongation at break, tensile modulus, and calculation of cross-link density from mechanical. As well as, application for floor tiles included compression set and abrasion resistance measurements. All results indicated an enhancement in tensile strength, modulus, and cross-link density by adding silicate fillers and more enhanced in presence of radiation. For the application of floor tiles, the MS filler gave a good compression set and abrasion resistance followed by other silicate fillers (PS, FA), except WG.

Production and properties of natural rubber glove using sustainable benign accelerator

In natural polyisoprene glove manufacturing industries, the selection of accelerators in the curing system is mainly determined by the curing characteristics, maturation time required, cross-link density and mechanical properties of gloves. In this study, a new accelerator replacing conventional ones in a typical glove manufacturing process, was studied in order to produce free carcinogen dipped article. The glove properties and performance prepared by using both conventional and new proposed accelerators were studied and compared. The use of a conventional accelerator tends to release carcinogenic chemicals namely N-nitrosamine and N-nitrosatable substances. These chemicals are restrained on dipped articles under the requirement of EN 71-12:2013. Xanthogen accelerators promote the reduction of carcinogenic chemicals, but they are associated with prolonged maturation hour, which is unfavourable in the manufacturing industry. This study used a mixture of a benign accelerator, namely, diisononyldithiocarbamate and diisopropyl xanthogen polysulfide, to substitute the usage of conventional accelerators zinc dibutyl dithiocarbamate and zinc diethyl dithiocarbamate. The effects of benign accelerator loading in latex compounds were studied by focusing on the swelling index, maturation hour, carcinogenic chemical released and mechanical properties, thermal degradation and stability. Results showed no presence of N-nitrosamines and N-nitrosatable substances in the final dipped products by using 0.3 and 0.5 phr of benign accelerator. This study showed that 0.5 phr of benign accelerator achieved a moderate pre-vulcanising rate and improved the pre-ageing tensile strength and elongation by 11% and 7.0%, respectively. Moreover, its thermal stability was higher and discolouration intensity was lower as compared with the conventional accelerator.