scholarly journals Thermal and mechanical properties of epoxy resin reinforced with modified iron oxide nanoparticles

2021 ◽  
pp. 50533
Author(s):  
Yasmine N. Baghdadi ◽  
Lucia Youssef ◽  
Kamal Bouhadir ◽  
Mohammad Harb ◽  
Samir Mustapha ◽  
...  
2017 ◽  
Vol 31 (1) ◽  
pp. 24-31 ◽  
Author(s):  
Fariba Jafari-Soghieh ◽  
Behrooz Maleki ◽  
Hossein Behniafar

In this work, the effects of dendrimer-functionalized magnetic iron oxide nanoparticles (Fe3O4@D-NH2) on improving thermal and mechanical properties in epoxy networks (ENs) are investigated. Magnetic iron oxide nanoparticles are prepared by coprecipitation of iron (II) chloride tetrahydrate with iron (III) chloride hexahydrate. Poly(amido-amine) dendrimer is synthesized by Michael addition reaction from diethylenetriamine with methyl acrylate. The fabricated dendrimer has been used to stabilize and functionalize magnetic nanoparticles. Then, magnetic iron oxide nanoparticles are encapsulated within the dendrimer and subsequently loaded into diglycidyl ether of bisphenol A (DGEBA) epoxy resin in two different contents, that is, 5 and 10 wt%. The amine groups of dendrimer-functionalized magnetic iron oxide nanoparticles allow them to be covalently linked to the polymer matrix alongside the main amine hardener. The resulting epoxy/magnetic iron oxide nanocomposites are thoroughly characterized by X-ray diffraction analysis, field emission scanning electron microscopy, and Fourier transform infrared spectroscopy. Probing the thermal behaviors of the epoxy/magnetic iron oxide nanocomposites by thermogravimetric analysis indicated that the temperature of 10% decomposition and the temperatures of the maximum decomposition rate values of Fe3O4@D-NH2@EN series increased up to 20 and 10°C, respectively. Dynamic mechanical thermal analysis also indicated that the organo-magnetic iron oxide nanoparticles can lead to an excellent interaction between the nanoparticles and the resulting DGEBA/isophorone diamine ENs.


2020 ◽  
Vol 1 (6) ◽  
pp. 1835-1840
Author(s):  
Mohammad Valizadeh Kiamahalleh ◽  
Abbas Alishah ◽  
Fereshteh Yousefi ◽  
Saeid Hojjati Astani ◽  
Aliakbar Gholampour ◽  
...  

Incorporation of iron oxide nanoparticles into cement mortar composites enhances the formation of hydration products and the physico-mechanical performances of the composite construct.


2018 ◽  
Vol 102 (10) ◽  
pp. 4489-4498 ◽  
Author(s):  
Mostafa Seifan ◽  
Ajit K. Sarmah ◽  
Ali Khajeh Samani ◽  
Alireza Ebrahiminezhad ◽  
Younes Ghasemi ◽  
...  

2018 ◽  
Vol 6 (10) ◽  
Author(s):  
Hosam Zaghloul ◽  
Doaa A. Shahin ◽  
Ibrahim El- Dosoky ◽  
Mahmoud E. El-awady ◽  
Fardous F. El-Senduny ◽  
...  

Antisense oligonucleotides (ASO) represent an attractive trend as specific targeting molecules but sustain poor cellular uptake meanwhile superparamagnetic iron oxide nanoparticles (SPIONs) offer stability of ASO and improved cellular uptake. In the present work we aimed to functionalize SPIONs with ASO targeting the mRNA of Cyclin B1 which represents a potential cancer target and to explore its anticancer activity. For that purpose, four different SPIONs-ASO conjugates, S-M (1–4), were designated depending on the sequence of ASO and constructed by crosslinking carboxylated SPIONs to amino labeled ASO. The impact of S-M (1–4) on the level of Cyclin B1, cell cycle, ROS and viability of the cells were assessed by flowcytometry. The results showed that S-M3 and S-M4 reduced the level of Cyclin B1 by 35 and 36%, respectively. As a consequence to downregulation of Cyclin B1, MCF7 cells were shown to be arrested at G2/M phase (60.7%). S-M (1–4) led to the induction of ROS formation in comparison to the untreated control cells. Furthermore, S-M (1–4) resulted in an increase in dead cells compared to the untreated cells and SPIONs-treated cells. In conclusion, targeting Cyclin B1 with ASO-coated SPIONs may represent a specific biocompatible anticancer strategy.


2018 ◽  
Author(s):  
Hattie Ring ◽  
Zhe Gao ◽  
Nathan D. Klein ◽  
Michael Garwood ◽  
John C. Bischof ◽  
...  

The Ferrozinen assay is applied as an accurate and rapid method to quantify the iron content of iron oxide nanoparticles (IONPs) and can be used in biological matrices. The addition of ascorbic aqcid accelerates the digestion process and can penetrate an IONP core within a mesoporous and solid silica shell. This new digestion protocol avoids the need for hydrofluoric acid to digest the surrounding silica shell and provides and accessible alternative to inductively coupled plasma methods. With the updated digestion protocol, the quantitative range of the Ferrozine assay is 1 - 14 ppm. <br>


2018 ◽  
Author(s):  
Hattie Ring ◽  
Zhe Gao ◽  
Nathan D. Klein ◽  
Michael Garwood ◽  
John C. Bischof ◽  
...  

The Ferrozinen assay is applied as an accurate and rapid method to quantify the iron content of iron oxide nanoparticles (IONPs) and can be used in biological matrices. The addition of ascorbic aqcid accelerates the digestion process and can penetrate an IONP core within a mesoporous and solid silica shell. This new digestion protocol avoids the need for hydrofluoric acid to digest the surrounding silica shell and provides and accessible alternative to inductively coupled plasma methods. With the updated digestion protocol, the quantitative range of the Ferrozine assay is 1 - 14 ppm. <br>


Sign in / Sign up

Export Citation Format

Share Document