Square Wave Voltammetry for Selective Detection of Dopamine Using Polyglycine Modified Carbon Ionic Liquid Electrode

2011 ◽  
Vol 23 (12) ◽  
pp. 2832-2838 ◽  
Author(s):  
Yonghong Li ◽  
Xinsheng Liu ◽  
Wanzhi Wei
2009 ◽  
Vol 21 (21) ◽  
pp. 2297-2302 ◽  
Author(s):  
Joaquín A. Ortuño ◽  
Carmen Serna ◽  
Angela Molina ◽  
Encarnación Torralba

2019 ◽  
Vol 72 (2) ◽  
pp. 122 ◽  
Author(s):  
Junqiao Lee ◽  
Debbie S. Silvester

From a security point of view, detecting and quantifying explosives in mixed environments is required to identify potentially concealed explosives. Electrochemistry offers a viable method to detect nitroaromatic explosive compounds owing to the presence of easily reducible nitro groups that give rise to a current signal. However, their reduction potentials can overlap with interfering species, making it difficult to distinguish particular compounds. We have therefore examined the effect of oxygen, moisture, and other nitroaromatic species on the cyclic voltammetry and square wave voltammetry of nitroaromatic compounds of a range of mixed environments, focussing on 2,4,6-trinitrotoluene (TNT) and 2,4-dinitrotoluene (DNT) as model analytes, and using the hydrophobic room-temperature ionic liquid (RTIL) [P14,6,6,6][NTf2] as the solvent. Oxygen (0–20% vol.) minimally affected the current of the first reduction peak of TNT in [P14,6,6,6][NTf2], but significantly affects the current for DNT. The impact of water (0 to 86% relative humidity), however, was much more dramatic – even in the hydrophobic RTIL, water significantly affected the currents of the analyte peaks for TNT and DNT, and gave rise to additional reduction features, further contributing to the current. Additionally, the voltammetry of other related di- and tri-nitro compounds (2,6-dinitrotoluene, 1,3-dinitrobenzene, 2,4,6-trinitrotoluene, 1,3,5-trinitrobenzene, and musk xylene) was also studied to understand how different substituents on the aromatic ring may affect the reduction potentials. A 50:50 mixture of TNT and DNT revealed that both analytes could be separately identified and quantified using square wave voltammetry. Overall, this information is useful in determining the effect of other species on the current signals of electrochemical explosive sensors, and reveals that it may be necessary to dry the aprotic RTIL electrolyte when used in humid environments.


2020 ◽  
Vol 16 (3) ◽  
pp. 341-348
Author(s):  
Surinya Traipop ◽  
Suchada Chuanuwatanakul ◽  
Orawon Chailapakul ◽  
Eakkasit Punrat

Background: Recently, Derris scandens, a Thai herbal medicine with anti-inflammatory activity, is widely used as beverage and supplementary food. When the traditional medicine is a choice for health therapy, the simple and reliable equipment is required to control the suitable consuming amount of the active component. Objective: To develop the electrochemical sensor for genistein determination in Derris scandens with high sensitivity and rapid operation. Methods: An in-house screen-printed electrochemical sensor consisting of a three-electrode system was developed for genistein determination. A silver/silver chloride (Ag/AgCl) reference electrode, a carbon counter electrode and a carbon working electrode were prepared on a 0.3-mm-thick plastic substrate by the screen-printing technique using conductive ink. The dimensions of each sensor were 2.5×1.0 cm. Only 50 µL of sample solution was required on this device for the determination of genistein concentration by rapid response square wave voltammetry. Results: The oxidation peak of genistein appeared with good response in acidic media at a peak potential of 0.6 V. Moreover, the signal was enhanced by modifying the conductive carbon ink with cobalt( II) phthalocyanine. Under the optimized conditions, the linear range was found to be 2.5-150 µM and the detection limit was 1.5 µM. Moreover, the small volume extraction was successfully developed without any further pre-concentration. This proposed method was applied to determine genistein in Derris scandens with satisfying results. Conclusion: The proposed method is promising as an alternative method for genistein determination with facile and fast analysis.


2009 ◽  
Vol 74 (10) ◽  
pp. 1489-1501 ◽  
Author(s):  
Marina Zelić ◽  
Milivoj Lovrić

Isopotential points in square-wave voltammetry are described for the first time. Model calculations and real measurements (performed with UO22+ and Eu3+ in perchlorate and bromide solutions, respectively) indicate that such an intersection could be observed when backward components of the net response, resulting from an increase in frequency or reactant concentration, are presented together. The electrode reaction should be fully reversible because quasireversible or slower electron transfer processes give the isopoints only at increasing reactant concentrations but not at increasing square-wave frequencies. The effect could be used as an additional diagnostic criterion for recognition of reversible electrode reactions where products remain dissolved in the electrolyte solution.


Crystals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 714
Author(s):  
Gaber A. M. Mersal ◽  
Hamdy S. El-Sheshtawy ◽  
Mohammed A. Amin ◽  
Nasser Y. Mostafa ◽  
Amine Mezni ◽  
...  

The agricultural use of organophosphorus pesticides is a widespread practice with significant advantages in crop health and product yield. An undesirable consequence is the contamination of soil and groundwater by these neurotoxins resulting from over application and run-off. Here, we design and synthesize the mononuclear zinc(II) complexes, namely, [Zn(AMB)2Cl](ClO4) 1 and [Zn(AMB)2(OH)](ClO4) 2 (AMB = 2-aminomethylbenzimidazole), as artificial catalysts inspired by phosphotriesterase (PTE) for the hydrolysis of organophosphorus compounds (OPs) and simultaneously detect the organophosphate pesticides such as fenitrothion and parathion. Spectral and DFT (B3LYP/Lanl2DZ) calculations revealed that complexes 1 and 2 have a square-pyramidal environment around zinc(II) centers with coordination chromophores of ZnN4Cl and ZnN4O, respectively. Both 1 and 2 were used as a modifier in the construction of a biomimetic sensor for the determination of toxic OPs, fenitrothion and parathion, in phosphate buffer by square wave voltammetry. The hydrolysis of OPs using 1 or 2 generates p-nitrophenol, which is subsequently oxidized at the surface of the modified carbon past electrode. The catalytic activity of 2 was higher than 1, which is attributed to the higher electronegativity of the former. The oxidation peak potentials of p-nitrophenol were obtained at +0.97 V (vs. Ag/AgCl) using cyclic voltammetry (CV) and +0.88 V (vs. Ag/AgCl) using square wave voltammetry. Several parameters were investigated to evaluate the performance of the biomimetic sensor obtained after the incorporation of zinc(II) complex 1 and 2 on a carbon paste electrode (CPE). The calibration curve showed a linear response ranging between 1.0 μM (0.29 ppm) and 5.5 μM (1.6 ppm) for fenitrothion and 1.0 μM (0.28 ppm) and 0.1 μM (0.028 ppm) for parathion with a limit of detection (LOD) of 0.08 μM (0.022 ppm) and 0.51 μM (0.149 ppm) for fenitrothion and parathion, respectively. The obtained results clearly demonstrated that the CPE modified by 1 and 2 has a remarkable electrocatalytic activity towards the hydrolysis of OPs under optimal conditions.


Sign in / Sign up

Export Citation Format

Share Document