Electrochemical Determination of Famotidine in Real Samples Using rGO/Cu2O Nanocomposite Modified Carbon Paste Electrode

Here, we developed a sensitive electrochemical sensor for famotidine (FAT) using Cu2O nanoparticles and reduced graphene oxide (rGO) as a sensing platform. The Cu2O nanoparticles and rGO were synthesized through a simple process and characterized by versatile analytical methods. The prepared Cu2O nanoparticles and rGO were taken to modify the carbon paste electrode (Cu2O/rGO/CPE) and developed for the electrochemical analysis of the FAT at pH 6.0. Cu2O/rGO/CPE showed superior electrocatalytic activity for detecting FAT, attributed to the high surface area of rGO and the electrocatalytic properties of Cu2O nanoparticles. The designed FAT sensor exhibited two linear ranges from 0.1-3 µM and 3-50 µM with a detection limit of 0.08 µM (S/N=3) using a differential pulse voltammetry. The proposed sensor also showed a repeatable and stable response over one month with negligible interference from usual organic and inorganic species. The sensor was also validated measuring FAT in real samples (urine, serum and pharmaceutical tablet) with good recovery values from 99.6 to 110.9%.

Highly sensitive voltammetric determination of NADH based on N-CQDs decorated SnO2/ionic liquid/carbon paste electrode

A highly sensitive and selective modified electrode was successfully developed for the monitoring of nicotinamide adenine dinucleotide (NADH) in the presence of folic acid. In this regard, a carbon paste electrode (CPE) was functionalized by the nitrogen-doped carbon quantum dots/tin oxide (N-CQDs/SnO2) nanocomposite and 1-butyl-2,3-dimethyl imidazolium hexafluorophosphate ([C4DMIM][PF6]) ionic liquid (IL). The structure and surface morphology of the nanocomposite were characterized by various methods, including field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), high-resolution transmission electron microscopy (HR-TEM), and X-ray diffraction (XRD). The modified electrode displayed powerful and long-lasting electron mediating activity, with well-separated NADH and folic acid oxidation peaks. The sensing response of the developed [C4DMIM][PF6]/N-CQDs/SnO2/CPE platform was evaluated by determining NADH via the voltammetric technique under the optimized operating conditions. The current peaks of the square wave voltammograms of NADH and folic acid increased linearly with enhancing its concentrations within the ranges of 0.003 - 275 µM NADH and 0.4 - 380 µM folic acid. The detection limits for NADH and folic acid were obtained at 0.8 nM and 0.1 µM, respectively. Interference species such as glucose, urea, tryptophan, glycine, methionine, and vitamin B12 had no influence on the ability of the fabricated modified electrode to detect the target species. The low detection limit, high sensitivity, excellent selectivity, superior stability, and cost-effectiveness made it suitable for the quantification of NADH in the real biological samples with the recovery percent values in the range of 97.5 - 103%.

Electrochemical Method for Ease Determination of Sodium Diclofenac Trace Levels in Water Using Graphene—Multi-Walled Carbon Nanotubes Paste Electrode

Sodium diclofenac (DCF) presence reported in water use cycle at various concentrations including trace levels necessitates continuous development of advanced analytical method for its determination. In this work, ease electrochemical methods for DCF determination based on voltammetric and amperometric techniques were proposed using a simple combination of graphene with multi-walled carbon nanotubes as paste electrode. Integration of the graphene with multi-walled carbon nanotubes enlarged the electroactive surface area of the electrode and implicitly enhanced the electrochemical response for DCF determination. On the basis of the sorption autocatalytic effect manifested at low concentration of DCF, we found that the preconcentration step applied prior to differential-pulsed voltammetry (DPV) and multiple-pulsed amperometry (MPA) allowed for the enhancement of the electroanalytical performance of the DCF electrochemical detections, which were validated by testing in tap water. The lowest limit of detection (LOD) of 1.40 ng·L−1 was found using preconcentration prior to DPV under optimized operating conditions, which is better than that reached by other carbon-based electrodes reported in the literature.

Indirect Differential Pulse Voltammetric Determination of Fluoride Ions at Carbon Paste Electrode Modified with Porous and Electroactive Fe3+/Fe2+ Based-Metal Organic Frameworks Type MIL-101(Fe)

An innovative and reliable electrochemical sensor was proposed for simple, sensitive and selective determination of F- ions. The sensor is based on the fabrication of porous and electroactive Fe-based metal organic frameworks [MIL-101(Fe)]. It was blended with graphite powder and liquid paraffin oil to from carbon paste electrode (CPE). The MIL-101(Fe)@CPE was characterized using different techniques such as scanning electron microscope, powder X-ray diffraction spectroscopy, Fourier transform infrared spectroscopy, energy dispersive X-ray, cyclic voltammetry, electrochemical impedance spectroscopy, differential pulse voltammetry. The MIL-101(Fe)@CPE exhibited two redox peaks (anodic and cathodic) corresponding to Fe3+ and Fe2+, respectively. The determination of F- ions based on the formation of a stable fluoroferric complex with Fe3+/ Fe2+, decreasing the currents of redox species. It was found that the anodic peak current (Ipa) is linearly proportional to the concentration of F- in the range of 0.67-130 µM with a limit of detection (S/N=3) of 0.201 µM. The electrode exhibited good selectivity towards F- detection with no significant interferences from common anions. The as-fabricated sensor was applied for the determination of F- in environmental water samples with recoveries % and RSDs % in the range of 98.1-102.4 % and 2.4-3.7 %, respectively.

Detection of Galactose and Glycerophospholipids by Galactose Biosensors and Advancement Their Proficiency Using Berkelium Colloidal Nanoparticles and Poly(3,4-Ethylenedioxythiophene)-Poly(Styrenesulfonate)-Based Biosensors

In the current paper, galactose-oxidase enzyme is used as stabilization medium due to its more proficiency, ability for more accurate controlling the enzyme reaction, protecting against wasting of enzyme as well as simple and easy use and exchange of enzyme medium after performing some levels of surface modification and developing multi-walled carbon nanotubes (MWCNTs) on Berkelium plate. For better connecting and stabilizing the enzyme on the medium, the prepared medium is washed by high concentration sulfuric acid and nitric acid and a large volume of deionized water and for protecting enzyme from devastating effect of Berkelium and prohibiting them to become inactive, surface is covered with cystamine before stabilization. Regarding the large size of galactose-oxidase enzyme compared to surface of medium, a connective material with amid at one end and pyrine at the other end is used as transfer agent and for stabilizing this connection, the prepared medium is placed into dimethylformamide (DMF) solution for a couple of hours. Activity of stabilized enzyme at 460 (nm) wavelength recorded by spectroscope was depicted against time to evaluate its stability in various times. The prepared medium, which have a large amount of galactose-oxidase enzyme, can be used as electrode in sensors. Furthermore, galactose-oxidase electrochemical sensor is one of the best methods for detecting low amount of galactose and applying Berkelium colloidal nanoparticles as a supplementary material in the structure of biosensor can be effective for advancement its proficiency and optimum proficiency. On the other hand, in the current study, electrode biosensor entitled as modified carbon paste electrode with Berkelium colloidal nanoparticles (Bknano/CPE) is produced by carbon graphite powder, paraffin oil and Berkelium colloidal nanoparticles (24 nm) and it is compared with carbon paste electrode (CP). In semi-permeable membranes, a combination of 1 (ml) of 0.1 (M) phosphate buffer with specified pH and 10 (mg) of galactose-oxidase enzyme is placed around each electrode. In the same potential of 0.7 (V), biosensors are tested with galactose in concentration range of (0-1) (mM) and various amounts of pH (4,6,8) which lead to producing the maximum current and tracing galactose in pH=6 and concentration of 1 (M) as the optimum condition. Currentmetry induced from both biosensors are compared and it is confirmed that using Berkelium colloidal nanoparticles in the structure of (Bknano/CPE) electrode leads to increasing the conductivity and currentmerty of biosensor. In addition, qualitative and quantitative measurement of food components is of great importance due to high cost of traditional methods, in addition to tendency for more accurate and sensitive detecting of these components. galactose and glycerophospholipids are such compounds that they frequently measure. Various methods are used to detect these food elements. However, the necessity for accurate measurement of these two compounds with high sensitivity, especially for food health issue, leads to developing biological methods, especially biosensors. Among them, biosensors based on conductive polymer nanostructures, especially Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate), have been recently interested due to their unique characteristics. The current paper aims to introduce and investigate the previously performed studies about Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)-based biosensors for detecting galactose and glycerophospholipids.