Model prediction capacity of ephemeral gully evolution in conservation tillage systems

The purpose of research: to improve the technology of growing flax in the Western region of Ukraine on the basis of the introduction of systems for minimizing tillage, which will increase the yield of trusts and seeds. Research methods: field, laboratory, visual and comparative calculation method. Research results: Field experiments included the study of three tillage systems (traditional, canning and mulching) and determining their impact on growth and development and yields of trusts and flax seeds. The traditional tillage system included the following operations: plowing with a reversible plow to a depth of 27 cm, cultivation with simultaneous harrowing and pre-sowing tillage. The conservation system is based on deep shelfless loosening of the soil and provided for chiseling to a depth of 40 cm, disking to a depth of 15 cm, cultivation with simultaneous harrowing, pre-sowing tillage. During the implementation of the mulching system, disking to a depth of 15 cm, cultivation with simultaneous harrowing and pre-sowing tillage with a combined unit was carried out. Tillage implements and machines were used to perform tillage operations: disc harrow BDVP-3,6, reversible plow PON-5/4, chisel PCh-3, cultivator KPSP-4, pre-sowing tillage unit LK-4. The SZ-3,6 ASTPA grain seeder was used for sowing long flax of the Kamenyar variety. Simultaneously with the sowing of flax seeds, local application of mineral fertilizers (nitroammophoska 2 c/ha) was carried out. The application of conservation tillage allows to obtain the yield of flax trust at the level of 3,5 t/ha, which is 0,4 t/ha (12.9 %) more than from the area of traditional tillage and 0,7 t/ha (25 %) in comparison with mulching. In the area with canning treatment, the seed yield was the highest and amounted to 0,64 t/ha. The difference between this option and traditional and mulching tillage reaches 0,06 t/ha (10,3 %) and 0.10 t/ha (18.5 %), respectively. Conclusions. Preservation tillage, which is based on shelf-free tillage to a depth of 40 cm and disking to a depth of 15 cm has a positive effect on plant growth and development, yield and quality of flax.

Conservation Tillage Systems for Cotton in the Tennessee Valley

Soil Science Society of America Journal ◽

10.2136/sssaj2002.0569 ◽

2002 ◽

Vol 66 (2) ◽

pp. 569 ◽

Cited By ~ 16

Author(s):

E. B. Schwab ◽

D. W. Reeves ◽

C. H. Burmester ◽

R. L. Raper

Keyword(s):

Conservation Tillage ◽

Tillage Systems ◽

Tennessee Valley

Managing Phosphorus and Potassium Is Key in Conservation Tillage Systems

Crops & Soils ◽

10.1002/crso.20101 ◽

2021 ◽

Vol 54 (2) ◽

pp. 14-17

Author(s):

Megan Sever

Keyword(s):

Conservation Tillage ◽

Tillage Systems ◽

Phosphorus And Potassium

Conservation Tillage Systems and Equipment Requirements

A Systems Approach to Conservation Tillage ◽

10.1201/9781351070850-3 ◽

2018 ◽

pp. 21-40

Author(s):

William A. Hayes

Keyword(s):

Conservation Tillage ◽

Tillage Systems

Maximizing Performance in Conservation Tillage Systems - an Overview

10.13031/2013.9150 ◽

2002 ◽

Author(s):

Randall C. Reeder

Keyword(s):

Conservation Tillage ◽

Tillage Systems

Comparison of energy inputs and energy efficiency for maize in a long-term tillage experiment under Pannonian climate conditions

Plant Soil and Environment ◽

10.17221/67/2021-pse ◽

2021 ◽

Vol 67 (No. 5) ◽

pp. 45-52

Author(s):

Gerhard Moitzi ◽

Reinhard W. Neugschwandtner ◽

Hans-Peter Kaul ◽

Helmut Wagentristl

Keyword(s):

Energy Efficiency ◽

Total Energy ◽

Fuel Consumption ◽

Crop Production ◽

Energy Input ◽

Conservation Tillage ◽

Energy Output ◽

No Tillage ◽

Tillage Systems ◽

Total Energy Input

Sustainable crop production requires an efficient usage of fossil energy. This six-year study on a silt loam soil (chernozem) analysed the energy efficiency of four tillage systems (mouldboard plough 25–30 cm, deep conservation tillage 35 cm, shallow conservation tillage 8–10 cm, no-tillage). Fuel consumption, total energy input (made up of both direct and indirect input), grain of maize yield, energy output, net-energy output, energy intensity and energy use efficiency were considered. The input rates of fertiliser, herbicides and seeds were set constant; measured values of fuel consumption were used for all tillage operations. Total fuel consumption for maize (Zea mays L.) production was 81.6, 81.5, 69.5 and 53.2 L/ha for the four tillage systems. Between 60% and 64% of the total energy input (17.0–17.4 GJ/ha) was indirect energy (seeds, fertiliser, herbicides, machinery). The share of fertiliser energy of the total energy input was 36% on average across all tillage treatments. Grain drying was the second highest energy consumer with about 22%. Grain yield and energy output were mainly determined by the year. The tillage effect on yield and energy efficiency was smaller than the growing year effect. Over all six years, maize produced in the no-tillage system reached the highest energy efficiency.

Force Requirements and Soil Disruption of Straight and Bentleg Subsoilers for Conservation Tillage Systems

10.13031/2013.10378 ◽

2002 ◽

Author(s):

Randy L. Raper

Keyword(s):

Conservation Tillage ◽

Tillage Systems

An Integrated Weed Management Approach to Managing Foxtail Barley (Hordeum jubatum) in Conservation Tillage Systems

Weed Technology ◽

10.1017/s0890037x00041841 ◽

1999 ◽

Vol 13 (2) ◽

pp. 347-353 ◽

Cited By ~ 19

Author(s):

Robert E. Blackshaw ◽

Greg Semach ◽

Xiangju Li ◽

John T. O'Donovan ◽

K. Neil Harker

Keyword(s):

Crop Yield ◽

Weed Management ◽

Conservation Tillage ◽

Wheat Yield ◽

Integrated Weed Management ◽

Management Approach ◽

Row Spacing ◽

Seeding Rate ◽

Tillage Systems ◽

Perennial Plants

A 4-yr field experiment was conducted to determine the merits of combining cultural and chemical controls to manage foxtail barley in reduced-tillage systems. Factors studied were crop row spacing, seeding rate, and application rate and timing of glyphosate within a spring wheat-flax cropping sequence. Glyphosate applied preseeding at 400 or 800 g/ha killed foxtail barley seedlings but only suppressed established perennial plants. Glyphosate applied postharvest at 800 g/ha killed 60 to 70% of established plants. Combinations of preseeding and postharvest glyphosate gave the greatest reductions in foxtail barley biomass and seed production and resulted in the greatest increases in crop yield. Including flax in the rotation allowed use of grass herbicides such as quizalofop or sethoxydim that effectively controlled foxtail barley seedlings and provided some suppression of perennial plants. An increase in wheat seeding rate from 75 to 115 kg/ha reduced foxtail barley growth and increased wheat yield in 3 of 4 yr. Increasing the flax seeding rate from 40 to 80 kg/ha or reducing wheat and flax row spacing from 30 to 20 cm provided little benefit in managing foxtail barley or increasing crop yield. A multiyear approach combining agronomic practices and timely use of herbicides should allow growers to effectively manage foxtail barley in annual cropping systems using conservation tillage.

In-Season Nitrogen Uptake by Grain Sorghum following Legume Green Manures in Conservation Tillage Systems

Agronomy Journal ◽

10.2134/agronj2004.5100 ◽

2004 ◽

Vol 96 (2) ◽

pp. 510-515 ◽

Cited By ~ 6

Author(s):

Daniel W. Sweeney ◽

Joseph L. Moyer

Keyword(s):

Nitrogen Uptake ◽

Conservation Tillage ◽

Grain Sorghum ◽

Green Manures ◽

Tillage Systems